EN ISO 1833-17:2020
(Main)Textiles - Quantitative chemical analysis - Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid) (ISO 1833-17:2019)
Textiles - Quantitative chemical analysis - Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid) (ISO 1833-17:2019)
This document specifies a method, using concentrated sulfuric acid, to determine the mass percentage of chlorofibres and certain other fibres, after removal of non-fibrous material, in textiles made of mixtures of
— cotton, viscose, cupro, modal, lyocell, acetate, triacetate, polyamide, polyester, elastomultiester, certain acrylic and certain modacrylic fibres
with
— chlorofibres (based on homopolymers of vinyl chloride), polypropylene, elastolefin, melamine and polypropylene/polyamide bicomponent.
The modacrylics concerned are those which give a clear solution when immersed in concentrated sulfuric acid.
This method can be used, particularly in place of the methods described in ISO 1833-12 and ISO 1833-13, in all cases where a preliminary test shows that the chlorofibres do not dissolve completely either in dimethylformamide or in the azeotropic mixture of carbon disulfide and acetone.
Textilien - Quantitative chemische Analysen - Teil 17: Mischungen aus Cellulosefasern und bestimmten Fasern mit Chlorfasern und bestimmten anderen Fasern (Verfahren mit konzentrierter Schwefelsäure) (ISO 1833-17:2019)
Dieses Dokument legt ein Verfahren fest, bei dem konzentrierte Schwefelsäure verwendet wird, zur Bestimmung des prozentualen Massenanteils an Chlorfasern und bestimmten anderen Fasern, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus Mischungen aus:
- Baumwolle, Viskose, Cupro, Modal, Lyocell, Acetat, Triacetat, Polyamid, Polyester, Elastomultiester, bestimmten Polyacryl- und bestimmten Modacrylfasern
mit
- Chlorfasern (auf Basis von Homopolymeren des Vinylchlorids), Polypropylen, Elastolefin, Melamin und Polypropylen-/Polyamid-Bikomponentenfasern.
Bei den betroffenen Modacrylfasern handelt es sich um solche, die beim Eintauchen in konzentrierte Schwefelsäure eine klare Lösung ergeben.
Dieses Verfahren kann insbesondere anstelle der in ISO 1833 12 und ISO 1833 13 beschriebenen Verfahren in allen Fällen angewendet werden, in denen Vorprüfungen zeigen, dass sich die Chlorfasern weder in Dimethylformamid noch in der azeotropen Mischung aus Schwefelkohlenstoff und Aceton vollständig auflösen.
Textiles - Analyse chimique quantitative - Partie 17: Mélanges de fibres de cellulose et certaines fibres avec des chlorofibres et certaines autres fibres (méthode à l'acide sulfurique concentré) (ISO 1833-17:2019)
Le présent document spécifie une méthode de détermination, à l'acide sulfurique concentré, de la masse exprimée en pourcentage de chlorofibres et de certaines autres fibres, après élimination des matières non fibreuses, dans les textiles composés de mélanges de:
— coton, viscose, cupro, modal, lyocell, acétate, triacétate, polyamide, polyester, élastomultiester, certaines fibres acryliques et certaines fibres modacryliques;
avec
— chlorofibres (basées sur des homopolymères de chlorure de vinyle), polypropylène, élastoléfine, mélamine et bicomposant polypropylène/polyamide.
Les modacryliques concernés sont ceux qui donnent une solution claire par immersion dans de l'acide sulfurique concentré.
Cette méthode peut être utilisée, notamment à la place des méthodes décrites dans l'ISO 1833-12 et l'ISO 1833-13, dans tous les cas où un essai préliminaire a montré que les chlorofibres ne se dissolvent complètement ni dans du diméthylformamide ni dans un mélange azéotrope de sulfure de carbone et d'acétone.
Tekstilije - Kvantitativna kemična analiza - 17. del: Mešanice celuloznih vlaken in nekaterih vlaken s klorofibrom in nekaterimi drugimi vlakni (metoda z uporabo koncentrirane žveplove kisline) (ISO 1833-17:2019)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
SIST EN ISO 1833-17:2020
01-maj-2020
Nadomešča:
SIST EN ISO 1833-17:2013
Tekstilije - Kvantitativna kemična analiza - 17. del: Mešanice celuloznih vlaken in
nekaterih vlaken s klorofibrom in nekaterimi drugimi vlakni (metoda z uporabokoncentrirane žveplove kisline) (ISO 1833-17:2019)
Textiles - Quantitative chemical analysis - Part 17: Mixtures of cellulose fibres and
certain fibres with chlorofibres and certain other fibres (method using concentrated
sulfuric acid) (ISO 1833-17:2019)Textilien - Quantitative chemische Analysen - Teil 17: Mischungen aus Chlorfasern
(Homopolymere des Vinylchlorids) und bestimmten anderen Fasern (Schwefelsäure-Verfahren) (ISO 1833-17:2019)
Textiles - Analyse chimique quantitative - Partie 17: Mélanges de fibres de cellulose et
certaines fibres avec des chlorofibres et certaines autres fibres (méthode à l'acide
sulfurique concentré) (ISO 1833-17:2019)Ta slovenski standard je istoveten z: EN ISO 1833-17:2020
ICS:
59.060.20 Umetna vlakna Man-made fibres
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 1833-17:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN ISO 1833-17:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 1833-17:2020
EN ISO 1833-17
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 59.060.01 Supersedes EN ISO 1833-17:2010
English Version
Textiles - Quantitative chemical analysis - Part 17:
Mixtures of cellulose fibres and certain fibres with
chlorofibres and certain other fibres (method using
concentrated sulfuric acid) (ISO 1833-17:2019)
Textiles - Analyse chimique quantitative - Partie 17: Textilien - Quantitative chemische Analysen - Teil 17:
Mélanges de fibres de cellulose et certaines fibres avec Mischungen aus Chlorfasern (Homopolymere des
des chlorofibres et certaines autres fibres (méthode à Vinylchlorids) und bestimmten anderen Fasern
l'acide sulfurique concentré) (ISO 1833-17:2019) (Schwefelsäure-Verfahren) (ISO 1833-17:2019)
This European Standard was approved by CEN on 28 November 2019.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-17:2020 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
SIST EN ISO 1833-17:2020
EN ISO 1833-17:2020 (E)
Contents Page
European foreword ....................................................................................................................................................... 3
---------------------- Page: 4 ----------------------SIST EN ISO 1833-17:2020
EN ISO 1833-17:2020 (E)
European foreword
This document (EN ISO 1833-17:2020) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1833-17:2010.This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.Endorsement notice
The text of ISO 1833-17:2019 has been approved by CEN as EN ISO 1833-17:2020 without any
modification.---------------------- Page: 5 ----------------------
SIST EN ISO 1833-17:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 1833-17:2020
INTERNATIONAL ISO
STANDARD 1833-17
Second edition
2019-09
Textiles — Quantitative chemical
analysis —
Part 17:
Mixtures of cellulose fibres and
certain fibres with chlorofibres and
certain other fibres (method using
concentrated sulfuric acid)
Textiles — Analyse chimique quantitative —
Partie 17: Mélanges de fibres cellulosiques et certaines fibres avec des
chlorofibres et certaines autres fibres (méthode à l'acide sulfurique
concentré)
Reference number
ISO 1833-17:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 1833-17:2020
ISO 1833-17:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1833-17:2020
ISO 1833-17:2019(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Principle ........................................................................................................................................................................................................................ 1
5 Reagents ........................................................................................................................................................................................................................ 2
6 Apparatus ..................................................................................................................................................................................................................... 2
7 Test procedure ........................................................................................................................................................................................................ 2
8 Calculation and expression of results ............................................................................................................................................. 2
9 Precision ....................................................................................................................................................................................................................... 3
Bibliography ....................................
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.