iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14771:2005

(Main)

Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

This European Standard specifies a method for the determination of the flexural creep stiffness of bituminous binders in the range of 30 MPa to 1 GPa by means of the bending beam rheometer.
WARNING - The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit - Biegebalkenrheometer (BBR)

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Biegekriechsteifigkeit von bitumenhaltigen
Bindemitteln im Bereich von 30 MPa bis 1 GPa mit einem Biegebalkenrheometer fest.
WARNUNG � Die Anwendung dieser Europäischen Norm kann gefährliche Substanzen, Arbeitsgänge
und Ausrüstung einschließen. In der Europäischen Norm werden nicht alle Sicherheitsprobleme
angesprochen, die mit ihrer Anwendung verbunden sind. Es liegt in der Verantwortung des
Anwenders dieser Norm, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und
vorher zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)

Le présent document spécifie une méthode permettant de déterminer le module de rigidité en flexion des liants bitumineux dans la plage de 30 MPa à 1 GPa au moyen d'un rhéomètre à flexion de barreau (BBR).
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva – Ugotavljanje upogibne togosti – Reometer z nosilcem, obremenjenim na upogib (BBR)

General Information

Status
Withdrawn
Publication Date
17-May-2005
Withdrawal Date
15-May-2012
ICS
75.140 - Waxes, bituminous materials and other petroleum products
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 336 - Bituminous binders
Drafting Committee
CEN/TC 336/WG 1 - Bituminous binders for paving
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
16-May-2012
Completion Date
16-May-2012
Ref Project
SIST EN 14771:2005 - Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)

Relations

Replaced By
EN 14771:2012 - Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
Effective Date
21-May-2011

Buy Standard

EN 14771:2005EN 14771:2005
PreviousNext
Standard
EN 14771:2005
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14771:2005
01-november-2005
Bitumen in bitumenska veziva – Ugotavljanje upogibne togosti – Reometer z
nosilcem, obremenjenim na upogib (BBR)
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending
Beam Rheometer (BBR)
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Biegekriechsteifigkeit -
Biegebalkenrheometer (BBR)
Bitumes et liants bitumineux - Détermination du module de rigidité en flexion -
Rhéometre a flexion de barreau (BBR)
Ta slovenski standard je istoveten z: EN 14771:2005
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 14771:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14771:2005

---------------------- Page: 2 ----------------------

SIST EN 14771:2005
EUROPEAN STANDARD
EN 14771
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 75.140; 91.100.50
English version
Bitumen and bituminous binders - Determination of the flexural
creep stiffness - Bending Beam Rheometer (BBR)
Bitumes et liants bitumineux - Détermination du module de Bitumen und bitumenhaltige Bindemittel - Bestimmung der
rigidité en flexion - Rhéomètre à flexion du barreau (BBR) Biegekriechsteifigkeit - Biegebalkenrheometer (BBR)
This European Standard was approved by CEN on 25 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14771:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14771:2005
EN 14771:2005 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.5
5 Apparatus .5
6 Preparation of test samples.6
7 Procedure .7
8 Calculation.8
9 Expression of results .9
10 Precision.9
11 Test report .10

2

---------------------- Page: 4 ----------------------

SIST EN 14771:2005
EN 14771:2005 (E)
Foreword
This document (EN 14771:2005) has been prepared by Technical Committee CEN/TC 336 “Bituminous
binder
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16346:2023(Main)
Bitumen and bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions
SIST EN 16346:2024

This document specifies a method for the determination of the breaking and immediate adhesivity behaviour of cationic bituminous emulsions in contact with aggregate. The method applies to emulsions used for surface dressing and similar applications and can be used for formulation as well as for production control purposes.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12595:2023(Main)
Bitumen and bituminous binders - Determination of kinematic viscosity
SIST EN 12595:2023

This document specifies a method for the determination of the kinematic viscosity of bituminous binders at 60 °C and 135 °C, in a range from 6 mm2/s to 300 000 mm2/s. Other temperatures are possible if calibration constants are known. Bituminous emulsions are not covered within the scope of this method.
Results for this method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined.
NOTE   This document assumes Newtonian behaviour of the sample at test conditions.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14771:2023(Main)
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
SIST EN 14771:2023

This document specifies a method for the determination of the flexural creep stiffness of bitumen and bituminous binders in the range of 30 MPa to 1 GPa by means of the bending beam rheometer.
The method can be applied to a variety of bitumens, including unmodified as well as modified binders, as fresh (unused) binders, as well as binders after laboratory ageing conditioning (e.g. EN 12607-1, EN 14769), and also binders that have been recovered from asphalt mixtures.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12596:2023(Main)
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
SIST EN 12596:2023

This document specifies a method for the determination of the dynamic viscosity of bituminous binders by means of a vacuum capillary viscometer at 60 °C in a range between 0,003 6 Pa⋅s and 580 000 Pa⋅s. Other temperatures are possible if calibration constants are known. Bituminous emulsions and non-newtonian binders (e.g. some polymer modified bitumen) are not within the scope of this method.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14769:2023(Main)
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
SIST EN 14769:2023

This document specifies an accelerated long-term ageing/conditioning procedure for bituminous binders. The procedure involves ageing trays of binder at elevated temperatures under pressurized conditions in a pressure ageing vessel (PAV).
NOTE   For binders to be used in hot and warm asphalt applications, the pre-conditioning of the sample can be performed using one of the methods in the EN 12607 series. For binders to be used in bituminous emulsion and cut back or fluxed applications, the stabilization of the sample is such that there are no volatiles remaining.
WARNING - The use of this document can involve hazardous materials, operations and equipment, in particular, the use of a high pressure ageing vessel. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. If there is the likelihood of volatile components being present in a binder, this procedure is not used.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14770:2023(Main)
Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
SIST EN 14770:2023

This document specifies a general method of using a dynamic shear rheometer (DSR) for measuring the rheological properties of bituminous binders. The procedure involves determining the complex shear modulus and phase angle of binders over a range of test frequencies and test temperatures when tested in oscillatory shear.
From the test, the complex shear modulus, |G*|, and its phase angle, δ, at a given temperature and frequency are calculated, as well as the components G' and G" of the complex shear modulus.
This method is applicable to un-aged, aged, stabilized and recovered bituminous binders. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber).
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12847:2022(Main)
Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
SIST EN 12847:2022

This document specifies a method for the determination of the settling tendency of bituminous emulsions.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12850:2022(Main)
Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions
SIST EN 12850:2022

This document specifies a method for measuring the pH value of bituminous emulsions.
It is applicable to anionic, cationic bituminous emulsions and bituminous emulsions prepared by means of non-ionic surfactant.
NOTE   In certain circumstances, the pH value can provide an indication of the ionic character of a bituminous emulsion when confirmed by a particle polarity test conforming to EN 1430 [1].
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17643:2022(Main)
Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
SIST EN 17643:2022

This document specifies the Binder Fast Characterization Test (for short: BTSV test, German: Bitumen-Typisierungs-Schnell-Verfahren). The test is conducted using a Dynamic Shear Rheometer (DSR). It is used to characterize bitumen and bituminous binders and to assess the deformation behaviour at high service temperatures.
The test procedure described in this document covers the testing of paving grade bitumen or modified bitumen, as fresh (unused) binders, as well as binders after laboratory ageing conditioning (e.g. EN 12607-1, EN 14769), and also binders that have been recovered from asphalt mixtures. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber).
NOTE   The test procedure has not been applied on bituminous binders recovered from bitumen emulsions yet.
The test determines the temperature and the associated phase angle at which a bituminous binder exhibits a defined complex shear modulus in stress-controlled oscillation mode at constant frequency and with continuous increase of the test temperature.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to ensure that regulatory requirements are fulfilled prior to application of this document. This document involves handling of apparatus and binders at very high temperatures. Always wear protective gloves and eyewear when handling hot binders, and avoid contact with any exposed, unprotected skin.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13614:2021(Main)
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
SIST EN 13614:2021

This document specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water.
The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion.
The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day