EN 4537-2:2009

Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series

This standard specifies the characteristics of flanged bushes in corrosion resisting steel with self-lubricating liner elevated load for aerospace applications.
The bushes are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range - 55 °C to 163 °C.

Luft- und Raumfahrt - Buchsen mit Flansch aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, erhöhte Belastung - Teil 2: Maße und Belastungen - Inch-Reihe

Die vorliegende Norm legt die Eigenschaften von Buchsen mit Flansch aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, erhöhter Belastung, für die Anwendung in der Luft- und Raumfahrt fest.
Die Buchsen sind für den Einsatz in starren oder beweglichen Teilen der Luftfahrzeugstruktur und der Betätigungsvorrichtungen vorgesehen.
Sie sind für den Einsatz im Temperaturbereich von 55 °C bis 163 °C bestimmt.

Série aérospatiale - Bagues, à épaulement en acier résistant à la corrosion à garniture autolubrifiante, charge élevée - Partie 2: Dimensions et charges - Série en inches

Aeronavtika - Puše s prirobnico iz korozijsko odpornega jekla s samomazalno oblogo, serija za večje obremenitve - 2. del: Mere in nosilnosti - Colski tip

General Information

• Status: Published
• Publication Date: 16-Jun-2009
• Withdrawal Date: 30-Dec-2009
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4537-2:2009 - Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DPRPD]DOQRLuft- und Raumfahrt - Buchsen mit Flansch aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, erhöhte Belastung - Teil 2: Maße und Belastungen - Inch ReiheSérie aérospatiale - Bagues, à épaulement en acier résistant à la corrosion à garniture autolubrifiante, charge élevée - Partie 2: Dimensions et charges - Série en inchesAerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace constructionICS:Ta slovenski standard je istoveten z:EN 4537-2:2009SIST EN 4537-2:2009en01-september-2009SIST EN 4537-2:2009SLOVENSKI
STANDARD



SIST EN 4537-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4537-2June 2009ICS 49.035 English VersionAerospace series - Bushes, flanged in corrosion-resisting steelwith self-lubricating liner, elevated load - Part 2: Dimensions andloads - Inch seriesSérie aérospatiale - Bagues, à épaulement en acierrésistant à la corrosion à garniture autolubrifiante, chargeélevée - Partie 2: Dimensions et charges - Série en inchesLuft- und Raumfahrt - Buchsen mit Flansch auskorrosionsbeständigem Stahl mit selbstschmierenderBeschichtung, erhöhte Belastung - Teil 2: Maße undBelastungen - Inch ReiheThis European Standard was approved by CEN on 24 April 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4537-2:2009: ESIST EN 4537-2:2009



EN 4537-2:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Requirements .4 4.1 Configuration, dimensions and mass.4 4.2 Surface roughness .4 4.3 Materials .5 4.4 Surface treatment .5 5 Designation . 18 6 Marking . 18 7 Technical specification . 19 8 Design recommendation . 19
SIST EN 4537-2:2009



EN 4537-2:2009 (E) 3 Foreword This document (EN 4537-2:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-
...