EN ISO 24034:2020
(Main)Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
This document specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical composition.
The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beam welding, and other fusion welding processes.
Schweißzusätze - Massivdrahtelektroden, Massivdrähte und Massivstäbe zum Schmelzschweißen von Titan und Titanlegierungen - Einteilung (ISO 24034:2020)
Dieses Dokument legt Anforderungen für die Einteilung von Massivdrahtelektroden, Massivdrähten und Massivstäben zum Schmelzschweißen von Titan und Titanlegierungen fest. Die Einteilung erfolgt nach ihrer chemischen Zusammensetzung.
Die Massivdrahtelektrode weist für das Metall Inertgasschweißen (MIG) dieselbe Zusammensetzung auf wie Massivdrahtelektroden, Massivdrähte und Massivstäbe für das Wolfram Inertgasschweißen (WIG), das Plasmaschweißen, das Laserstrahlschweißen und für andere Schmelzschweißprozesse.
Produits consommables pour le soudage - Fils-électrodes pleins, fils pleins et baguettes pleines pour le soudage par fusion du titane et des alliages de titane - Classification (ISO 24034:2020)
Le présent document spécifie les exigences de classification des fils-électrodes pleins, des fils pleins et des baguettes pleines pour le soudage par fusion du titane et des alliages de titane. La classification est basée sur la composition chimique.
Les compositions des fils-électrodes pleins pour le soudage MIG (soudage à l'arc avec fil-électrode fusible sous gaz inerte) sont identiques aux compositions des fils-électrodes pleins, des fils pleins et des baguettes pleines utilisées pour le soudage TIG (soudage à l'arc avec électrode de tungstène sous gaz inerte), pour le soudage plasma, pour le soudage par faisceau laser, et pour les autres procédés de soudage par fusion.
Dodajni in pomožni materiali za varjenje - Masivne žične elektrode, polne žice in palice za talilno varjenje titana in titanovih zlitin - Razvrstitev (ISO 24034:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2020
Nadomešča:
SIST EN ISO 24034:2012
Dodajni in pomožni materiali za varjenje - Masivne žične elektrode, polne žice in
palice za talilno varjenje titana in titanovih zlitin - Razvrstitev (ISO 24034:2020)
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of
titanium and titanium alloys - Classification (ISO 24034:2020)
Schweißzusätze - Massivdrahtelektroden, Massivdrähte und Massivstäbe zum
Schmelzschweißen von Titan und Titanlegierungen - Einteilung (ISO 24034:2020)
Produits consommables pour le soudage - Fils-électrodes pleins, fils pleins et baguettes
pleines pour le soudage par fusion du titane et des alliages de titane - Classification (ISO
24034:2020)
Ta slovenski standard je istoveten z: EN ISO 24034:2020
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
77.120.50 Titan in titanove zlitine Titanium and titanium alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 24034
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2020
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN ISO 24034:2010
English Version
Welding consumables - Solid wire electrodes, solid wires
and rods for fusion welding of titanium and titanium alloys
- Classification (ISO 24034:2020)
Produits consommables pour le soudage - Fils- Schweißzusätze - Massivdrahtelektroden,
électrodes pleins, fils pleins et baguettes pleines pour Massivdrähte und Massivstäbe zum Schmelzschweißen
le soudage par fusion du titane et des alliages de titane von Titan und Titanlegierungen - Einteilung (ISO
- Classification (ISO 24034:2020) 24034:2020)
This European Standard was approved by CEN on 16 July 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24034:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 24034:2020) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 24034:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24034:2020 has been approved by CEN as EN ISO 24034:2020 without any modification.
INTERNATIONAL ISO
STANDARD 24034
Third edition
2020-07
Welding consumables — Solid wire
electrodes, solid wires and rods
for fusion welding of titanium and
titanium alloys — Classification
Produits consommables pour le soudage — Fils-électrodes pleins, fils
pleins et baguettes pleines pour le soudage par fusion du titane et des
alliages de titane — Classification
Reference number
ISO 24034:2020(E)
©
ISO 2020
ISO 24034:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 24034:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
5 Symbols and requirements . 1
5.1 Symbol for the product . 1
5.2 Symbol for the chemical composition . 2
6 Mechanical properties . 2
7 Chemical analysis . 2
8 Rounding procedure . 2
9 Retests . 2
10 Technical delivery conditions . 2
11 Designation . 6
Annex A (informative) Explanation of classification symbols for chemical composition .7
Annex B (informative) Corresponding national classifications .10
Bibliography .12
ISO 24034:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 3, Welding consumables, in collaboration with the European Committee for
Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
Official interpretations of ISO/TC 44 documents, where they exist, are available from this page: https://
committee .iso .org/ sites/ tc44/ home/ interpretation .html.
This third edition cancels and replaces the second edition (ISO 24034:2010), which has been technically
revised. The main changes compared to the previous edition are as follows:
— a number of alloys in Table 1 have been updated;
— a number of typographical errors in Table 1 and Table B.1 have been corrected;
— Clause 8 has been updated to reflect the current agreed wording;
— in Clause 11, the words “Solid wire” have been deleted from each example designation;
— the last sentence of the second paragraph of A.1 has been deleted to align with A.15;
— a number of dated references in Annex B and the bibliography have been updated.
iv © ISO 2020 – All rights reserved
ISO 24034:2020(E)
Introduction
This document proposes a classification in order to designate solid wire electrodes, solid wires and
rods in terms of their chemical composition.
There is no unique relationship between the product form (solid wire electrodes, solid wires or rods)
and the welding process used (gas-shielded metal arc welding, tungsten inert gas arc welding, plasma
arc welding or laser beam welding). For this reason, solid wire electrodes, solid wires and rods can be
classified in terms of their chemical composition.
In this document, the symbol of the welding process is not used, because:
a) different joining processes are performed with the same chemical component consumable;
b) the producer is not able to determine the process symbol before shipping.
Also, it should be noted that the mechanical properties of all-weld metal test specimens or welded
joints produced by welding consumables can vary from those obtained in production joints because of
differences in welding procedure and the base-metal alloy. For this reason, the mechanical properties of
all-weld metal or weld
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.