EN 2480:2008

Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Bars - De ≤ 75 mm

This standard specifies the requirements relating to:
Steel FE-PL2108 (36NiCrMo16)
1 250 MPa ≤ Rm ≤ 1 400 MPa
Bars
De ≤ 75 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Stangen - De ≤ 75 mm

Série aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Barres - De ≤ 75 mm

Aeronavtika - Jeklo FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Palice - De = 75 mm

General Information

• Status: Published
• Publication Date: 25-Mar-2008
• Withdrawal Date: 29-Sep-2008
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Mar-2008
• Completion Date: 26-Mar-2008
• Ref Project: SIST EN 2480:2008 - Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Bars - De = 75 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Bars - De = 75 mmAeronavtika - Jeklo FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Palice - De = 75 mmSérie aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Barres - De = 75 mmLuft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Stangen - De = 75 mmTa slovenski standard je istoveten z:EN 2480:2008SIST EN 2480:2008en49.025.10ICS:SLOVENSKI
STANDARDSIST EN 2480:200801-junij-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2480March 2008ICS 49.025.10 English VersionAerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa= Rm = 1 400 MPa - Bars - De = 75 mmSérie aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 250MPa = Rm = 1 400 MPa - Barres - De = 75 mmLuft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1250 MPa = Rm = 1 400 MPa - Stangen - De = 75 mmThis European Standard was approved by CEN on 10 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2480:2008: E



EN 2480:2008 (E) 2 Foreword This document (EN 2480:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spai
...