iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 12612:1997

(Main)

Medical informatics - Messages for the exchange of healthcare administrative information

Medical informatics - Messages for the exchange of healthcare administrative information

1.1 This European Prestandard specifies general administrative messages for electronic information exchange between healthcare information systems. 1.2 The messages defined in this European Prestandard provide for an identification framwork for both administrative and non-administrative purposes.1.3 The messages identified in this European Prestandard pay especial attention to identification of both the individual and records pertaining to them and the registration of the individual on healthcare information systems.

Medizinische Informatik - Nachrichten für den Austausch administrativer Information im Gesundheitswesen

Informatique de santé - Messages pour l'échange d'informations d'ordre administratif dans le domaine de la santé

Medicinska informatika – Sporočila za izmenjavo administrativnih informacij o zdravstvenem varstvu

General Information

Status
Withdrawn
Publication Date
22-Apr-1997
Withdrawal Date
16-Jun-2020
ICS
11.020 - Medical sciences and health care facilities in general
11.020.99 - Other standards related to health care in general
35.240.70 - IT applications in science
35.240.80 - IT applications in health care technology
Technical Committee
CEN/TC 251 - Medical informatics
Drafting Committee
CEN/TC 251/WG 1 - Information models
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Jun-2020
Mandate
M/021 - Standardization Mandate forwarded to CEN/CENELEC/ETSI in the field of Information Technology and Telecommunications concerning healthcare informatics
M/255 - Standardization mandate to CEN, CENELEC and ETSI in the field of health care informatics
Ref Project
SIST ENV 12612:2003 - Medical informatics - Messages for the exchange of healthcare administrative information

Buy Standard

ENV 12612:2003ENV 12612:2003
PreviousNext
Standardization document
ENV 12612:2003
English language
162 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 12612:2003
01-oktober-2003
0HGLFLQVNDLQIRUPDWLND±6SRURþLOD]DL]PHQMDYRDGPLQLVWUDWLYQLKLQIRUPDFLMR
]GUDYVWYHQHPYDUVWYX
Medical informatics - Messages for the exchange of healthcare administrative
information
Medizinische Informatik - Nachrichten für den Austausch administrativer Information im
Gesundheitswesen
Informatique de santé - Messages pour l'échange d'informations d'ordre administratif
dans le domaine de la santé
Ta slovenski standard je istoveten z: ENV 12612:1997
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST ENV 12612:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 12612:2003

---------------------- Page: 2 ----------------------

SIST ENV 12612:2003

---------------------- Page: 3 ----------------------

SIST ENV 12612:2003

---------------------- Page: 4 ----------------------

SIST ENV 12612:2003

---------------------- Page: 5 ----------------------

SIST ENV 12612:2003

---------------------- Page: 6 ----------------------

SIST ENV 12612:2003

---------------------- Page: 7 ----------------------

SIST ENV 12612:2003

---------------------- Page: 8 ----------------------

SIST ENV 12612:2003

---------------------- Page: 9 ----------------------

SIST ENV 12612:2003

---------------------- Page: 10 ----------------------

SIST ENV 12612:2003

---------------------- Page: 11 ----------------------

SIST ENV 12612:2003

---------------------- Page: 12 ----------------------

SIST ENV 12612:2003

---------------------- Page: 13 ----------------------

SIST ENV 12612:2003

---------------------- Page: 14 ----------------------

SIST ENV 12612:2003

---------------------- Page: 15 ----------------------

SIST ENV 12612:2003

---------------------- Page: 16 ----------------------

SIST ENV 12612:2003

---------------------- Page: 17 ----------------------

SIST ENV 12612:2003

---------------------- Page: 18 ----------------------

SIST ENV 12612:2003

---------------------- Page: 19 ----------------------

SIST ENV 12612:2003

---------------------- Page: 20 ----------------------

SIST ENV 12612:2003

---------------------- Page: 21 ----------------------

SIST ENV 12612:2003

---------------------- Page: 22 ----------------------

SIST ENV 12612:2003

---------------------- Page: 23 ----------------------

SIST ENV 12612:2003

---------------------- Page: 24 ----------------------

SIST ENV 12612:2003

---------------------- Page: 25 ----------------------

SIST ENV 12612:2003

---------------------- Page: 26 ----------------------

SIST ENV 12612:2003

---------------------- Page: 27 ----------------------

SIST ENV 12612:2003

---------------------- Page: 28 ----------------------

SIST ENV 12612:2003

---------------------- Page: 29 ----------------------

SIST ENV 12612:2003

---------------------- Page: 30 ----------------------

SIST ENV 12612:2003

---------------------- Page: 31 ----------------------

SIST ENV 12612:2003

---------------------- Page: 32 ----------------------

SIST ENV 12612:2003

---------------------- Page: 33 ----------------------

SIST ENV 12612:2003

---------------------- Page: 34 ----------------------

SIST ENV 12612:2003

---------------------- Page: 35 ----------------------

SIST ENV 12612:2003

---------------------- Page: 36 ----------------------

SIST ENV 12612:2003

---------------------- Page: 37 ----------------------

SIST ENV 12612:2003

---------------------- Page: 38 ----------------------

SIST ENV 12612:2003

---------------------- Page: 39 ----------------------

SIST ENV 12612:2003

---------------------- Page: 40 ----------------------

SIST ENV 12612:2003

---------------------- Page: 41 ----------------------

SIST ENV 12612:2003

---------------------- Page: 42 ----------------------

SIST ENV 12612:2003

---------------------- Page: 43 ----------------------

SIST ENV 12612:2003

---------------------- Page: 44 ----------------------

SIST ENV 12612:2003

---------------------- Page: 45 ----------------------

SIST ENV 12612:2003

---------------------- Page: 46 ----------------------

SIST ENV 12612:2003

---------------------- Page: 47 ----------------------

SIST ENV 12612:2003

---------------------- Page: 48 ----------------------

SIST ENV 12612:2003

---------------------- Page: 49 ----------------------

SIST ENV 12612:2003

---------------------- Page: 50 ----------------------

SIST ENV 12612:2003

---------------------- Page: 51 ----------------------

SIST ENV 12612:2003

---------------------- Page: 52 ----------------------

SIST ENV 12612:2003

---------------------- Page: 53 -----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 5601:2024(Main)
Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023)
kSIST-TP FprCEN ISO/TR 5601:2024

This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-1:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels
kSIST FprEN 12662-1:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME). The working range is from 12 mg/kg to 26 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [4].
This document in general is applicable to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C.
This test method can be used for paraffinic diesel fuels as specified in EN 15940, for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17830:2024(Main)
Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2024)
kSIST FprEN ISO 17830:2024

This document specifies the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17827-2:2024(Main)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2024)
kSIST FprEN ISO 17827-2:2024

This document specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This document applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g. sawdust).

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-2:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 2: Fatty acid methyl esters
kSIST FprEN 12662-2:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in neat fatty acid methyl esters (FAME). The working range is from 5 mg/kg to 27 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [1].
This document in general is applicable to FAME having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. as specified in EN 14214 [2].
This test method can be used for FAME having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17952:2024(Main)
Value Management - Function Analysis: Basic characteristics, requirements and guidance for implementation
SIST EN 17952:2024

This document presents Function Analysis (FA) and specifies requirements for Function Analysis and its deliverables. It presents the two distinct areas of application, namely, Functional Need Analysis (FNA) relating to understanding the need, setting goals and Technical Function Analysis (TFA) relating to selecting and developing a solution. It specifies requirements for the basic characteristics of the deliverables within FNA and TFA and expands requirements, guidance and recommendations about FA expressed in the Functional Performance Specification Standard (EN 16271) and in the Value Management Standard (EN 12973).
This document provides an essential reference and support for any person wishing to improve the efficiency, effectiveness and overall performance of their organization. It aims to support sustainable development in an organization. FA offers an opportunity to enhance skills of people involved.
In order to present the conditions for implementation and development of FA deliverables, this document:
•   introduces the interests and fields of application and presents a variety of situations in which FA is used in support of projects of all types and sizes;
•   specifies essential conditions for successful FA, including roles and responsibilities of the people involved, monitoring the performance of the FA team, processes for validation and verification and supply of valid and verified deliverables; and
•   specifies requirements for FA and the basic characteristics of FA deliverables whilst outlining methods, and tools for the realization of the deliverables.
FA is progressed using the following:
•   FNA: support for the process of identifying and understanding the need, defining objectives, and setting the goal to be achieved;
•   TFA: support for design or research processes and evaluation of solutions; and
•   Iteratively focusing on the FNA and TFA by revisiting the identified need, balancing capabilities of available technologies, resources and constraints, achieving the most desirable outcome.
In the area of FNA, this document sets out FNA requirements for the deliverables to establish the Functional Need Expression (FNE). The FNE can serve as a basis for establishing an understanding of the expressed need, the complete list of User Related Functions (URFs), constraints and interfaces. These deliverables serve as a basis for identifying, organizing, characterizing and prioritizing functions and function interfaces. These deliverables can also support preliminary risk and reliability studies, economic studies, impact assessments and development of Functional Performance Specifications (FPSs).
In the area of TFA, this document sets out requirements for TFA deliverables which aim to satisfy the need, expressed in the FNE. The TFA deliverables are focused on analysing existing and potential solutions, identifying a complete list of the Product Related Functions (PRFs) to meet the FNE; evaluating concepts and making a choice for a solution then optimizing the Product Function Architecture (PFA) to identify the “best” solution.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17956:2024(Main)
Energy efficiency classes for technical insulation systems - Calculation method and applications
SIST EN 17956:2024

This document is applicable to technical insulation systems of operational installations in industry and the building services, such as pipes, ducts, vessels, equipment and built-in components.
The document specifies methods for the energy efficiency classification of insulation systems for the abovementioned components with an operational temperature range of −30 °C up to 650 °C.
The document addresses plant operators, engineers of operational installations, as well as the involved contractors such as insulation contractors and pipefitting contractors.
The design of safe surface temperatures for personal protection, as well as the prevention of condensation, is outside the scope of this document.
This document also does not apply to water-based heating and cooling systems in buildings and does not apply to directly buried district heating and district cooling pipes.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1865-2:2024(Main)
Patient handling equipment used in ambulances - Part 2: Power assisted stretcher
kSIST FprEN 1865-2:2024

This document specifies minimum requirements for the design and performance of power assisted stretchers used in road ambulances for the treatment and transportation of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8840:2024(Main)
Refractory materials - Determination of bulk density of granular materials (grain density) (ISO 8840:2021)
SIST EN ISO 8840:2024

As per ISO document i.e.
This document specifies three methods for the determination of the bulk density of granular
refractory materials (grain density) having a grain size larger than 2 mm:
— Method 1: mercury method with vacuum;
— Method 2: arrested water absorption method;
— Method 3: vacuum method with spin dryer option according to ISO 5017.
Method 1 is intended as the reference method.
NOTE  Depending on the nature of the material tested, the three methods can give different results.
Any statement of the value of a bulk density can therefore be accompanied by an indication of the
method used or to be used in case of dispute.
The same method can be used for the determination of the volume of the sample, for selecting and
preparing the sample, for
calculating the bulk density and for presenting the test report.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day