EN ISO 18278-3:2017

Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017)

ISO 18278-3:2017 specifies procedures for the determination of the acceptable welding current range and the electrode life for spot weld bonding using resistance spot welding with adhesive bonding.
ISO 18278-3:2017 is applicable for the evaluation of the weldability of prepared assemblies of uncoated and coated metal sheets with individual thicknesses from 0,4 mm to 6,0 mm.

Widerstandsschweißen - Schweißeignung - Teil 3: Verfahren zum Bewerten der Eignung für das Widerstandspunktschweißkleben (ISO 18278-3:2017)

Dieses Dokument legt spezifische Prüfverfahren zur Bestimmung des zulässigen Schweißstrombereiches und der Elektrodenstandmenge für das Punktschweißkleben unter Verwendung des Widerstandspunkt-schweißens in Zusammenhang mit Kleben fest.
Dieses Dokument ist zur Bewertung der Schweißeignung von vorbereiteten Baugruppen anwendbar, die aus unbeschichteten und beschichteten Blechen mit individuellen Dicken von 0,4 mm bis 6,0 mm bestehen.

Soudage par résistance - Soudabilité - Partie 3: Méthodes d'évaluation de l'aptitude au soudocollage par points (ISO 18278-3:2017)

ISO 18278-3:2017 spécifie une méthode d'essai spécifique permettant la détermination du domaine de soudabilité acceptable et de la durée de vie des électrodes pour le soudocollage par point qui est l'association du soudage par résistance par point et du collage.
ISO 18278-3:2017 est applicable à l'évaluation de la soudabilité d'assemblages de tôles de métal revêtues et non, d'épaisseurs individuelles comprises entre 0,4 mm et 6,0 mm.

Uporovno varjenje - Varivost - 3. del: Postopki vrednotenja varivosti pri hibridnem načinu točkovnega uporovnega varjenja in lepljenja (ISO 18278-3:2017)

Ta dokument podaja posebne preskusne postopke za določanje sprejemljivega razpona varilnega toka in življenjske dobe elektrode za točkovno varjenje, ki povezuje uporovno točkovno varjenje z lepljenjem. Ta dokument se uporablja za oceno varivosti pripravljenih sestavov neprevlečenih in prevlečenih kovinskih plošč s posameznimi debelinami od 0,4 do 6,0 mm.

General Information

• Status: Published
• Publication Date: 12-Sep-2017
• Withdrawal Date: 30-Mar-2018
• ICS: 25.160.10 - Welding processes
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Sep-2017
• Completion Date: 13-Sep-2017
• Ref Project: SIST EN ISO 18278-3:2018 - Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18278-3:2018
01-marec-2018
8SRURYQRYDUMHQMH9DULYRVWGHO3RVWRSNLYUHGQRWHQMDYDULYRVWLSULKLEULGQHP
QDþLQXWRþNRYQHJDXSRURYQHJDYDUMHQMDLQOHSOMHQMD,62
Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot
weld bonding (ISO 18278-3:2017)
Widerstandsschweißen - Schweißeignung - Teil 3: Verfahren zum Bewerten der Eignung
für das Widerstandspunktschweißkleben (ISO 18278-3:2017)
Soudage par résistance - Soudabilité - Partie 3: Méthodes d'évaluation de l'aptitude au
soudocollage par points (ISO 18278-3:2017)
Ta slovenski standard je istoveten z: EN ISO 18278-3:2017
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 18278-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18278-3:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 18278-3:2018


EN ISO 18278-3
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2017
EUROPÄISCHE NORM
ICS 25.160.40
English Version

Resistance welding - Weldability - Part 3: Evaluation
procedures for weldability in spot weld bonding (ISO
18278-3:2017)
Soudage par résistance - Soudabilité - Partie 3: Widerstandsschweißen - Schweißeignung - Teil 3:
Méthodes d'évaluation de l'aptitude au soudocollage Verfahren zum Bewerten der Eignung für das
par points (ISO 18278-3:2017) Widerstandspunktschweißkleben (ISO 18278-3:2017)
This European Standard was approved by CEN on 4 June 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18278-3:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18278-3:2018
EN ISO 18278-3:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18278-3:2018
EN ISO 18278-3:2017 (E)
European foreword
This document (EN ISO 18278-3:2017) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18278-3:2017 has been approved by CEN as EN ISO 18278-3:2017 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 18278-3:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 18278-3:2
...