Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)

ISO 18563-1:2015 identifies the functional characteristics of a multichannel ultrasonic phased array instrument used for phased array probes and provides methods for their measurement and verification.
ISO 18563-1:2015 can partly be applicable to ultrasonic phased array instruments in automated systems, but then, other tests might be needed to ensure satisfactory performance. When the phased array instrument is a part of an automated system, the acceptance criteria can be modified by agreement between the parties involved.
ISO 18563-1:2015 gives the extent of the verification and defines acceptance criteria within a frequency range of 0,5 MHz to 10 MHz.
The evaluation of these characteristics permits a well-defined description of the ultrasonic phased array instrument and comparability of instruments.

Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung mit phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO 18563-1:2015)

Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons en multiéléments - Partie 1: Appareils (ISO 18563-1:2015)

L'ISO 18563-1:2015 identifie les caractéristiques fonctionnelles d'un appareil à ultrasons multiélément destiné à alimenter des traducteurs multiéléments et fournit des méthodes pour les mesurer et les vérifier.
L'ISO 18563-1:2015 peut être en partie applicable aux appareils à ultrasons multiéléments présents dans les systèmes automatiques mais, dans ce cas, d'autres essais peuvent être nécessaires pour garantir des performances satisfaisantes. Lorsque l'appareil multiélément est intégré dans un système automatique, les critères d'acceptation peuvent être modifiés dans le cadre d'un accord entre les parties concernées.
L'ISO 18563-1:2015  donne l'étendue de la vérification et définit des critères d'acceptation dans une gamme de fréquences de 0,5 MHz à 10 MHz.
L'évaluation de ces caractéristiques permet de donner une description bien définie de l'appareil à ultrasons multiélément et d'assurer une comparaison entre appareils.

Neporušitvene preiskave - Ugotavljanje značilnosti in preverjanje ultrazvočne opreme faznih sistemov - 1. del: Naprave (ISO 18563-1:2015)

Ta evropski standard določa metode in kriterije sprejemljivosti za ocenjevanje električnih zmogljivosti ultrazvočnih instrumentov za delovanje ultrazvočne opreme faznih sond z osrednjimi frekvencami v razponu od 0,5 MHz do 10 MHz z uporabo pulzno-odbojnih tehnik. Ta dokument ne opisuje metod in kriterijev sprejemljivosti za opis zmogljivosti popolne ultrazvočne opreme faznih sistemov.

General Information

Status
Withdrawn
Publication Date
16-Jun-2015
Withdrawal Date
27-Sep-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Sep-2022

Relations

Buy Standard

Standard
EN ISO 18563-1:2015
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 18563-1:2013
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18563-1:2015
01-september-2015
1HSRUXãLWYHQHSUHLVNDYH8JRWDYOMDQMH]QDþLOQRVWLLQSUHYHUMDQMHXOWUD]YRþQH
RSUHPHID]QLKVLVWHPRYGHO1DSUDYH ,62
Non-destructive testing - Characterization and verification of ultrasonic phased array
systems - Part 1: Instruments (ISO 18563-1:2015)
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-
Prüfausrüstung mit phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO 18563-1:2015)
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle multi-
élément par ultrasons - Partie 1 : Instruments (ISO 18563-1:2015)
Ta slovenski standard je istoveten z: EN ISO 18563-1:2015
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 18563-1:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18563-1:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 18563-1:2015

EUROPEAN STANDARD
EN ISO 18563-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2015
ICS 19.100
English Version
Non-destructive testing - Characterization and verification of
ultrasonic phased array equipment - Part 1: Instruments (ISO
18563-1:2015)
Essais non destructifs - Caractérisation et vérification de Zerstörungsfreie Prüfung - Charakterisierung und
l'appareillage de contrôle par ultrasons en multiéléments - Verifizierung der Ultraschall-Prüfausrüstung mit
Partie 1: Appareils (ISO 18563-1:2015) phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO 18563-
1:2015)
This European Standard was approved by CEN on 21 February 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18563-1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18563-1:2015
EN ISO 18563-1:2015 (E)
Contents Page
European foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18563-1:2015
EN ISO 18563-1:2015 (E)
European foreword
This document (EN ISO 18563-1:2015) has been prepared by Technical Committee CEN/TC 138 “Non-
destructive testing” the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 "Non-destructive testing".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn
at the latest by December 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18563-1:2015 has been approved by CEN as EN ISO 18563-1:2015 without any modification.


3

---------------------- Page: 5 ----------------------

...

SLOVENSKI STANDARD
oSIST prEN ISO 18563-1:2013
01-september-2013
1HSRUXãLWYHQRSUHVNXãDQMH8JRWDYOMDQMH]QDþLOQRVWLLQSUHYHUMDQMHXOWUD]YRþQH
RSUHPHID]QLKVLVWHPRYGHO1DSUDYH ,62',6
Non-destructive testing - Characterization and verification of ultrasonic phased array
systems - Part 1: Instruments (ISO/DIS 18563-1:2013)
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-
Prüfausrüstung mit phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO/DIS 18563-
1:2013)
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle multi-
élément par ultrasons - Partie 1 : Instruments (ISO/DIS 18563-1:2013)
Ta slovenski standard je istoveten z: prEN ISO 18563-1
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
oSIST prEN ISO 18563-1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18563-1:2013

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18563-1:2013


EUROPEAN STANDARD
DRAFT
prEN ISO 18563-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2013
ICS 19.100
English Version
Non-destructive testing - Characterization and verification of
ultrasonic phased array systems - Part 1: Instruments (ISO/DIS
18563-1:2013)
Essais non destructifs - Caractérisation et vérification de Zerstörungsfreie Prüfung - Charakterisierung und
l'appareillage de contrôle multi-élément par ultrasons - Verifizierung der Ultraschall-Prüfausrüstung mit
Partie 1 : Instruments (ISO/DIS 18563-1:2013) phasengesteuerten Arrays - Teil 1: Prüfgeräte (ISO/DIS
18563-1:2013)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 138.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 18563-1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18563-1:2013
prEN ISO 18563-1:2013 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18563-1:2013
prEN ISO 18563-1:2013 (E)
Foreword
This document (prEN ISO 18563-1:2013) has been prepared by Technical Committee CEN/TC 138 “Non-
destructive testing", the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 "Non-destructive testing".
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DIS 18563-1:2013 has been approved by CEN as prEN ISO 18563-1:2013 without any
modification.
3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 18563-1:2013

---------------------- Page: 6 ----------------------
oSIST prEN ISO 18563-1:2013

DRAFT INTERNATIONAL STANDARD ISO/DIS 18563-1
ISO/TC 135/SC 3 Secretariat: DIN
Voting begins on Voting terminates on

2013-04-11 2013-09-11
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION

Non-destructive testing — Characterization and verification of
ultrasonic phased array equipment —
Part 1:
Instruments
Es
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.