Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes

This European Standard specifies a method for the determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes.
WARNING — The use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung des Destillationsverlaufes von mit Mineralölfluxmitteln verschnittenen oder gefluxten bitumenhaltigen Bindemitteln

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Destillationsverlaufes von mit Mineralöl-fluxmitteln verschnittenen und gefluxten bitumenhaltigen Bindemitteln fest. WARNHINWEIS — Die Anwendung dieser Norm kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. In dieser Europäischen Norm werden nicht alle Sicherheitsprobleme angesprochen, die mit ihrer Anwendung verbunden sind. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und vorher zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Bitumes et liants bitumineux - Détermination des caractéristiques de distillation des liants bitumineux fluidifiés et fluxés avec des fluxants d'origine minéral

La présente Norme européenne spécifie une méthode de détermination des caractéristiques de distillation des liants bitumineux fluidifiés et fluxés avec des fluxants d’origine minérale. AVERTISSEMENT – L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de la présente Norme européenne d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Določevanje destilacijskih značilnosti rezanih in fluksiranih bitumenskih veziv

Ta evropski standard določa metodo za določevanje destilacijskih značilnosti rezanih in fluksiranih bitumenskih veziv.

General Information

Status
Withdrawn
Publication Date
22-Jun-2010
Withdrawal Date
16-Jul-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Jul-2019

Relations

Buy Standard

Standard
EN 13358:2010
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Destillationsverlaufes von mit Mineralölfluxmitteln verschnittenen oder gefluxten bitumenhaltigen BindemittelnBitumes et liants bitumineux - Détermination des caractéristiques de distillation des bitumes fluidifiés et fluxés d'origine minéraleBitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13358:2010SIST EN 13358:2010en,fr,de01-oktober-2010SIST EN 13358:2010SLOVENSKI

STANDARDSIST EN 13358:20041DGRPHãþD
SIST EN 13358:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13358
June 2010 ICS 75.140; 91.100.50 Supersedes EN 13358:2004English Version

Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes

Bitumes et liants bitumineux - Détermination des caractéristiques de distillation des liants bitumineux fluidifiés et fluxés avec des fluxants d'origine minérale

Bitumen und bitumenhaltige Bindemittel - Bestimmung des Destillationsverlaufes von mit Mineralölfluxmitteln verschnittenen oder gefluxten bitumenhaltigen BindemittelnThis European Standard was approved by CEN on 20 May 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13358:2010: ESIST EN 13358:2010

EN 13358:2010 (E) 2 Contents Page Foreword ...................................................................................................................................................................... 31Scope .............................................................................................................................................................. 42Normative references .................................................................................................................................... 43Terms and definitions ................................................................................................................................... 44Principle .......................................................................................................................................................... 45Apparatus ....................................................................................................................................................... 46Procedure ....................................................................................................................................................... 56.1General ............................................................................................................................................................ 56.2Preparation of test samples .......................................................................................................................... 56.3Preparation of apparatus .............................................................................................................................. 56.4Procedure ....................................................................................................................................................... 67Calculations .................................................................................................................................................... 87.1Bituminous residue after distillation ........................................................................................................... 87.2Total distillate ................................................................................................................................................. 87.3Distillate fractions .......................................................................................................................................... 88Expression of results .................................................................................................................................... 99Precision ......................................................................................................................................................... 99.1Repeatability ................................................................................................................................................... 99.2Reproducibility ............................................................................................................................................... 910Test report ...................................................................................................................................................... 9Annex A (normative)

Specifications of thermometer ............................................................................................ 13 SIST EN 13358:2010

EN 13358:2010 (E) 3 Foreword This document (EN 13358:2010) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR/BNPé. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13358:2004. This European Standard is based on ASTM D402-97. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

SIST EN 13358:2010

EN 13358:2010 (E) 4 1 Scope This European Standard specifies a method for the determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes. WARNING — The use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders — Sampling bituminous binders EN 12594, Bitumen and bituminous binders — Preparation of test samples 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 distillation process of evaporation and condensation of a liquid 3.2 mineral flux flux which may be of carbochemical or petrochemical origin or a mixture of both 4 Principle Petroleum cut-back and fluxed bituminous binders are distilled at a controlled rate until the temperature of the liquid reaches 360 °C. The volumes of distillate and residue obtained over specified temperature ranges are measured. The residue from the distillation and also the distillate may be tested as required. 5 Apparatus Usual laboratory apparatus and glassware, together with the following. 5.1 Distillation flask, 500 ml and with side-arm, of dimensions given in Figure 1. 5.2 Condenser, standard, glass-jacketed, of nominal jacket length from 200 mm to 300 mm and overall tube length of (450 ± 10) mm (see Figure 3). 5.3 Adaptor, made with glass of approximately 1 mm thickness, with reinforced top, having an angle of approximately 105°. The inside diameter shall be (18 ± 2) mm at the wide end and not less than 5 mm at the narrow end. The lower surface of the adaptor shall be on a smooth descending curve from the wider end to the narrower. The inside line of the outlet end shall be vertical, and the outlet shall be cut or ground (not fire-polished) at an angle of (45± 5)°. NOTE In the equipment described in the above paragraphs and in Figure 1 and Figure 3, cork stoppers are used, however, equipment with ground glassd joints may also be used. SIST EN 13358:2010

EN 13358:2010 (E) 5 5.4 Shield and shield support 5.4.1 Shield, of steel, lined with 3 mm of suitable thermal insulation material and fitted with transparent mica windows of the form and dimensions shown in Figure 2, which is used to protect the flask from air currents and to reduce radiation. 5.4.2 Shield cover (top), consisting of two parts of fire resistant millboard of 6 mm minimum thickness. 5.5 Support for shield and flak, two sheets 150 mm × 150 mm of a mesh of approximately 1 mm wire gauze on a tripod or ring. 5.6 Heat source, adjustable Tirrill1) gas burner or equivalent. 5.7 Chimney for protection of the gas burner flame, as given in Figure 3. 5.8 Receiver, standard 100 ml g

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.