EN 13843:2003
(Main)Roller sports equipment - Inline-skates - Safety requirements and test methods
Roller sports equipment - Inline-skates - Safety requirements and test methods
This standard applies to inline-skates intended for users with a body mass of more than 20 kg. It specifies general and safety requirements for inline-skates to reduce the risk of injuries to both third parties and the user during their normal use. Inline-skates for use by a rider of less than 20 kg do not belong to the scope of this EN. They are covered by EN 71-1. This EN does not apply to roller skates.
Rollsportgeräte - Inline-skates - Sicherheitstechnische Anforderungen und Prüfverfahren
Diese Norm gilt für Inline-Skates für Benutzer mit einem Körpergewicht von mehr als 20 kg. Sie legt die sicherheitstechnischen Mindest-Anforderungen an Inline-Skates fest, Festlegungen für Prüfverfahren, Kennzeichnung und Benutzerinformation, die bei bestimmungsgemäßer Anwendung die Verletzungsgefahr für Dritte und die Benutzer verringern sollen. Inline-Skates für einen Läufer von weniger als 20 kg gehören nicht zum Anwendungsbereich dieser EN. Sie werden durch EN 71-1 erfaßt. Diese EN gilt nicht für Rollschuhe.
Equipements de sports à roulettes - Patins à roues en ligne - Exigences de sécurité et méthodes d'essais
La présente norme s'applique aux patins à roues en ligne destinés aux utilisateurs dont le poids est supérieur à 20 kg et inférieur à 100 kg.
Elle spécifie les exigences de sécurité minimales relatives aux patins à roues en ligne, les spécifications relatives aux méthodes d'essai, le marquage et les informations fournies par le fabricant afin de réduire le risque de blessures pouvant toucher les tiers ou l'utilisateur en cours d'utilisation normale.
Les patins à roues en ligne destinés à être utilisés par un utilisateur dont le poids est inférieur à 20 kg n'entrent pas dans le domaine d'application de la présente Norme européenne. Ils sont des jouets.
La présente Norme européenne ne s'applique pas aux patins à roulettes selon EN 13899.
Oprema za športe na koleščkih – Rolerji – Varnostne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rollsportgeräte - Inline-skates - Sicherheitstechnische Anforderungen und PrüfverfahrenEquipements de sports a roulettes - Patins a roues en ligne - Exigences de sécurité et méthodes d'essaisRoller sports equipment - Inline-skates - Safety requirements and test methods97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipmentICS:Ta slovenski standard je istoveten z:EN 13843:2003SIST EN 13843:2003en01-julij-2003SIST EN 13843:2003SLOVENSKI
STANDARD
SIST EN 13843:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13843February 2003ICS 97.220.40English versionRoller sports equipment - Inline-skates - Safety requirementsand test methodsEquipements de sport à roulettes - Patins à roulettes enligne - Exigences de sécurité et méthodes d'essaisRollsportgeräte - Inline-skates - SicherheitstechnischeAnforderungen und PrüfverfahrenThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13843:2003 ESIST EN 13843:2003
EN 13843:2003 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Requirements.65Testing.76Marking.127Information supplied by the manufacturer.12SIST EN 13843:2003
EN 13843:2003 (E)3ForewordThis document (EN 13843:2003) has been prepared by the Technical Committee CEN/TC 136 "Sports, playgroundand other recreational equipment", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2003, and conflicting national standards shall be withdrawn at the latest byAugust 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13843:2003
EN 13843:2003 (E)4IntroductionRequirements for inline-skates from the orthopedic point of view such as lateral support or similar were not includedin this standard because these requirements differ from user to user and therefore cannot be covered by astandard.SIST EN 13843:2003
EN 13843:2003 (E)51 ScopeThis standard applies to inline-skates intended for users with a body mass of more than 20 kg and less than100 kg.It specifies safety requirements for inline-skates, specifications for test methods, marking and information suppliedby the manufacturer to reduce the risk of injuries to both third parties and the user during their normal use.Inline-skates for use by a user of less than 20 kg do not belong to the scope of this European Standard. They aretoys.This European Standard does not apply to roller skates according to EN 13899.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 22768-1, General tolerances — Part 1: Tolerances for linear and angular dimensions without individualtolerance indications (ISO 2768-1:1989).3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1inline-skateroller sports equipment whose wheels are arranged inline and which can be attacheda) to the users boot or shoe by means of strapsb) as an integrated part of a boot or shoec) as a detachable chassis of a purpose built boot or shoe3.2binding elementbinding element for the attachment of the inline-skate to the user's foot or shoeSIST EN 13843:2003
EN 13843:2003 (E)64 RequirementsGeneral tolerances: EN 22768-1.4.1 Classification of inline-skates4.1.1 Class AInline-skates intended for use by a user mass of more than 20 kg up to 100 kg.4.1.2 Class BInline-skates intended for use by a user mass of more than 20 kg up to 60 kg and a length of the foot of no morethan 260 mm.4.2 Safety requirements4.2.1 Protruding components and edgesAll protruding components and edges on the inline-skate that can come into contact with body parts during normaluse shall be deburred or constructed in such a way as to prevent injury.The test is carried out according to 5.3.2.4.2.2 Binding elementsBinding elements shall prevent unintentional disconnection from the user's foot.This requirement is considered to be fulfilled if the correct functioning of the inline-skate is not impeded by broken,disconnected or loosened binding elements after the tests according to clause 5.4.2.3 Chassis4.2.3.1 GeneralThe chassis consists of one or more supports, axles, wheels, bearings and fixings.It shall withstand the impact loads, the constant load and the static load to which it is exposed during use. Thechassis shall be attached to the shoe and/or shoe mounting in such a way as to be secured against unintentionalloosening.These requirements are considered to be fulfilled if the correct functioning of the inline-skate is not impeded bybroken, disconnected or loosened binding elements after the tests according to clause 5.4.2.3.2 AxlesThe axles shall be attached and designed in such a way as to ensure that they cannot become loose, displaced ordeformed during use. The wheels shall be secured on the axles against unintentional loosening. Theserequirements are considered to be fulfilled if the axles are not loosened, deformed or displaced to such an extentas to impair proper functioning, and the wheels have not become loose after the tests according to clause 5.4.2.3.3 WheelsThe wheels shall be constructed from non-slip material. This requirement is considered to be fulfilled if a coefficientof adhesion mo of least 0,30 is achieved in the test according to 5.3.4.SIST EN 13843:2003
EN 13843:2003 (E)7After the tests according to clause 5, the wheels shall not show tears. They shall furt
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.