Aerospace series - Flange couplings - Cap, in heat resisting steel - Inch series

This standard specifies the characteristics of cap, in heat resisting steel for swivel flange couplings for inch series aerospace applications.
Nominal pressure: The parts shall withstand nominal pressures given in Table 1. The nominal pressure of the assembly depends on associated seal, tube material characteristics, tube diameter and tube wall thickness (see EN 4814).
NOTE   Assembly in accordance with TR 4815.

Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Verschlusskappe aus hochwarmfestem Stahl - Inch-Reihe

Diese Europäische Norm legt die Eigenschaften von Verschlusskappen aus hochwarmfestem Stahl für Rohrverschraubungen mit losen Flanschen in Anwendungen der Luft- und Raumfahrt (Inch-Reihe) fest.
Nenndruck: Die Teile müssen den Nenndrücken in der Tabelle 1 widerstehen. Der Nenndruck des Aufbaus hängt von der Dichtung, den Eigenschaften des Rohrmaterials, dem Rohrdurchmesser und der Dicke der Rohrwand ab (siehe EN 4814).
ANMERKUNG   Aufbau nach TR 4815.

Série aérospatiale - Raccordement à bride - Obturateur, en acier résistant à chaud - Série en inches

Aeronavtika - Prirobnične spojke - Pokrov iz toplotno odpornega jekla - Colska izvedba

Ta standard določa lastnosti pokrova iz toplotno odpornega jekla za vrtljive prirobnične spojke za colsko izvedbo v aeronavtiki.
Nazivni tlak: deli morajo prenesti nazivne tlake, podane v preglednici 1. Nazivni tlak sestava je odvisen od povezanega tesnila, lastnosti materiala cevi, premera cevi in debeline stene cevi (glej standard EN 4814).
OPOMBA: Sestav v skladu s standardom TR 4815.

General Information

Status
Published
Publication Date
23-May-2017
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
24-May-2017
Completion Date
24-May-2017

Buy Standard

Standard
EN 4813:2017
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 4813:2017
01-julij-2017
$HURQDYWLND3ULUREQLþQHVSRMNH3RNURYL]WRSORWQRRGSRUQHJDMHNOD&ROVND
L]YHGED
Aerospace series - Flange couplings - Cap, in heat resisting steel - Inch series
Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Verschlusskappe aus
hochwarmfestem Stahl - Inch-Reihe

Série aérospatiale - Raccordement à bride - Obturateur, en acier résistant à chaud -

Série en inches
Ta slovenski standard je istoveten z: EN 4813:2017
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4813:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4813:2017
---------------------- Page: 2 ----------------------
SIST EN 4813:2017
EN 4813
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2017
EUROPÄISCHE NORM
ICS 49.080
English Version
Aerospace series - Flange couplings - Cap, in heat resisting
steel - Inch series

Série aérospatiale - Raccordement à bride - Obturateur, Luft- und Raumfahrt - Rohrverschraubung mit

en acier résistant à chaud - Série en inches Flanschen - Verschlusskappe aus hochwarmfestem

Stahl - Inch-Reihe
This European Standard was approved by CEN on 14 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4813:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4813:2017
EN 4813:2017 (E)
Contents Page

European foreword ................................................................................................................................................................. 3

1 Scope ............................................................................................................................................................................. 4

2 Normative references ............................................................................................................................................. 4

3 Required characteristics ....................................................................................................................................... 4

4 Designation ................................................................................................................................................................. 6

5 Identification marking ........................................................................................................................................... 6

6 Technical specification ........................................................................................................................................... 6

7 Quality Assurance..................................................................................................................................................... 6

---------------------- Page: 4 ----------------------
SIST EN 4813:2017
EN 4813:2017 (E)
European foreword

This document (EN 4813:2017) has been prepared by the Aerospace and Defence Industries Association of

Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rule
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.