EN ISO 20344:2004/A1:2007
(Amendment)Personal protective equipment - Test methods for footwear - Amendment 1 (ISO 20344:2004/Amd 1:2007)
Personal protective equipment - Test methods for footwear - Amendment 1 (ISO 20344:2004/Amd 1:2007)
To add calibration and other details for test method (given in EN 13287) to be used for measuring slip resistance of PPE footwear.
Persönliche Schutzausrüstung - Prüfverfahren für Schuhe - Änderung 1 (ISO 20344:2004/Amd 1:2007)
Équipement de protection individuelle - Méthodes d'essais pour les chaussures - Amendement 1 (ISO 20344:2004/Amd 1:2007)
Osebna varovalna oprema - Metode preskušanja obutve - Dopolnilo 1 (ISO 20344:2004/Amd 1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN ISO
20344:2004/oprA1:2006
PREDSTANDARD
julij 2006
Osebna varovalna oprema - Metode preskušanja obutve - Dopolnilo 1 (ISO
20344:2004/DAM 1:2006)
Personal protective equipment - Test methods for footwear - Amendment 1 (ISO
20344:2004/DAM 1:2006)
ICS 13.340.50 Referenčna številka
SIST EN ISO
20344:2004/oprA1:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD
DRAFT
EN ISO 20344:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2006
ICS 13.340.50
English Version
Personal protective equipment - Test methods for footwear -
Amendment 1 (ISO 20344:2004/DAM 1:2006)
Équipement de protection individuelle - Méthodes d'essais
pour les chaussures - Amendement 1 (ISO
20344:2004/DAM 1:2006)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 161.
This draft amendment A1, if approved, will modify the European Standard EN ISO 20344:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20344:2004/prA1:2006: E
worldwide for CEN national Members.
EN ISO 20344:2004/prA1:2006 (E)
Foreword
This document (EN ISO 20344:2004/prA1:2006) has been prepared by Technical Committee
CEN/TC 161 "Foot and leg protectors", the secretariat of which is held by BSI, in collaboration
with Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment".
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).
DRAFT AMENDMENT ISO 20344:2004/DAmd 1
ISO/TC 94/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2006-04-27 2006-09-27
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Personal protective equipment — Test methods for footwear
AMENDMENT 1
Équipement de protection individuelle — Méthodes d'essais pour les chaussures
AMENDEMENT 1
ICS 13.340.50
ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
© International Organization for Standardization, 2006
ISO 20344:2004/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2006 – All rights reserved
EN ISO 20344:2004/prA1:2005 (E)
Contents Page
Foreword.2
Revised text .3
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Amendment 1 to ISO 20344:2004 was prepared by the European Committee for Standardization (CEN)
Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee
ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
DRAFT 2006
----------------
...
SLOVENSKI STANDARD
01-december-2007
Osebna varovalna oprema - Metode preskušanja obutve - Dopolnilo 1 (ISO
20344:2004/Amd 1:2007)
Personal protective equipment - Test methods for footwear - Amendment 1 (ISO
20344:2004/Amd 1:2007)
Persönliche Schutzausrüstung - Prüfverfahren für Schuhe, Änderung 1 (ISO
20344:2004/Amd 1:2007)
Équipement de protection individuelle - Méthodes d'essais pour les chaussures -
Amendement 1 (ISO 20344:2004/Amd 1:2007)
Ta slovenski standard je istoveten z: EN ISO 20344:2004/A1:2007
ICS:
13.340.50 =DãþLWQDREXWHY Protective footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 20344:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2007
ICS 13.340.50
English Version
Personal protective equipment - Test methods for footwear -
Amendment 1 (ISO 20344:2004/Amd 1:2007)
Équipement de protection individuelle - Méthodes d'essais Persönliche Schutzausrüstung - Prüfverfahren für Schuhe -
pour les chaussures - Amendement 1 (ISO Änderung 1 (ISO 20344:2004/Amd 1:2007)
20344:2004/Amd 1:2007)
This amendment A1 modifies the European Standard EN ISO 20344:2004; it was approved by CEN on 27 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20344:2004/A1:2007: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This document (EN ISO 20344:2004/A1:2007) has been prepared by Technical Committee CEN/TC 161 "Foot
and leg protectors", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC
94 "Personal safety - Protective clothing and equipment".
This Amendment to the European Standard EN ISO 20344:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and
conflicting national standards shall be withdrawn at the latest by March 2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
ANNEX ZA
(informative)
Relationship between this Amendment and the Essential Requirements
of EU Directive 89/686
This Amendment pertains to ISO 20344:2004, which was prepared under a mandate given to CEN by the
European Commission to provide one means of conforming to Essential Requirements of the New Approach
Directive 89/686.
INTERNATIONAL ISO
STANDARD 20344
First edition
2004-08-01
AMENDMENT 1
2007-09-01
Personal protective equipment — Test
methods for footwear
AMENDMENT 1
Équipement de protection individuelle — Méthodes d'essais pour les
chaussures
AMENDEMENT 1
Reference number
ISO 20344:2004/Amd.1:2007(E)
©
ISO 2007
ISO 20344:2004/Amd.1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 20344:2004/Amd.1:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 20344:2004 was prepared by the European Committee for Standardization (CEN)
Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee
ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in
accordan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.