prEN ISO 544
(Main)Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO/DIS 544:2024)
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO/DIS 544:2024)
ISO 544:2017 specifies technical delivery conditions for filler materials and fluxes for fusion welding.
ISO 544:2017 does not apply to other auxiliary materials such as shielding gases.
Schweißzusätze - Technische Lieferbedingungen für Schweißzusätze und Pulver - Art des Produktes, Maße, Grenzabmaße und Kennzeichnung (ISO/DIS 544:2024)
Produits consommables pour le soudage - Conditions techniques de livraison des produits d'apport et des flux - Type de produits, dimensions, tolérances et marquage (ISO/DIS 544:2024)
ISO 544:2017 spécifie les conditions techniques de livraison des produits d'apport et des flux utilisés pour le soudage par fusion.
ISO 544:2017 ne s'applique pas aux autres produits consommables auxiliaires, tels que les gaz de protection.
Dodajni in pomožni materiali za varjenje - Tehnični dobavni pogoji za dodajne materiale in praške - Vrsta izdelka, mere, tolerance in označevanje (ISO/DIS 544:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 544:2024
01-marec-2024
Dodajni in pomožni materiali za varjenje - Tehnični dobavni pogoji za dodajne
materiale in praške - Vrsta izdelka, mere, tolerance in označevanje (ISO/DIS
544:2024)
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type
of product, dimensions, tolerances and markings (ISO/DIS 544:2024)
Schweißzusätze - Technische Lieferbedingungen für Schweißzusätze und Pulver - Art
des Produktes, Maße, Grenzabmaße und Kennzeichnung (ISO/DIS 544:2024)
Produits consommables pour le soudage - Conditions techniques de livraison des
produits d'apport et des flux - Type de produits, dimensions, tolérances et marquage
(ISO/DIS 544:2024)
Ta slovenski standard je istoveten z: prEN ISO 544
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
oSIST prEN ISO 544:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 544:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 544:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 544
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2024-01-25 2024-04-18
Welding consumables — Technical delivery conditions for
filler materials and fluxes — Type of product, dimensions,
tolerances and markings
Produits consommables pour le soudage — Conditions techniques de livraison des produits d'apport et des
flux — Type de produits, dimensions, tolérances et marquage
ICS: 25.160.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 544:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 544:2024
ISO/DIS 544:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 544
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
Welding consumables — Technical delivery conditions for
filler materials and fluxes — Type of product, dimensions,
tolerances and markings
Produits consommables pour le soudage — Conditions techniques de livraison des produits d'apport et des
flux — Type de produits, dimensions, tolérances et marquage
ICS: 25.160.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 544:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 544:2024
ISO/DIS 544:2023(E)
Contents Page
Foreword .iv
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.