Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001)

This International Standard specifies requirements for the design and installation of engine-mounted fuel and
electrical system components on inboard petrol engines for minimizing fuel leakage and protecting against ignition
of surrounding flammable gases on small craft of hull length up to 24 m.
The following types of engines are exempt from the application of this International Standard:
 engines in personal watercraft as defined by ISO 13590 (see the bibliography);
 outboard engines.

Kleine Wasserfahrzeuge - Einbau-Benzinmotoren - Fest am Motor montierte Bauteile für die Kraftstoff- und Stromversorgung (ISO 15584:2001)

Petits navires - Moteurs intérieurs à essence - Éléments des circuits d'alimentation et des systèmes électriques (ISO 15584:2001)

La présente Norme internationale spécifie les exigences relatives à la conception et à l'installation des éléments des circuits d'alimentation en combustible et des systèmes électriques pour moteurs intérieurs à essence, permettant de réduire les fuites de combustible et d'assurer une protection contre l'inflammation des gaz explosifs environnants sur les petits navires dont la coque n'excède pas 24 m de longueur.  Les modèles de moteurs suivants ne sont pas couverts par la présente Norme internationale :  - les moteurs définis dans l'ISO 13590 équipant les motos aquatiques (voir la bibliographie) ;  - les moteurs hors-bord.

Mala plovila - Vgrajeni bencinski motorji - Nameščene komponente za gorivo in elektriko (ISO 15584:2001)

Mednarodni standard določa zahteve za načrtovanje in namestitev komponent za gorivo in elektriko, nameščenih v vgrajenih bencinskih motorjih, za zmanjševanje uhajanja goriva ter zaščito pred vžigom okoliških vnetljivih plinov na malih plovilih z dolžino trupa do 24 m.
Naslednje vrste motorjev ne spadajo na področje uporabe tega mednarodnega standarda:
_ motorji v osebnih vodnih plovilih, kot jih določa standard ISO 13590 (glej bibliografijo);
_ izven krmni motorji.

General Information

Status
Published
Publication Date
15-Aug-2017
Withdrawal Date
27-Feb-2018
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-Aug-2017
Due Date
17-Mar-2018
Completion Date
16-Aug-2017

Relations

Buy Standard

Standard
EN ISO 15584:2017
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15584:2017
01-oktober-2017
1DGRPHãþD
SIST EN ISO 15584:2002
0DODSORYLOD9JUDMHQLEHQFLQVNLPRWRUML1DPHãþHQHNRPSRQHQWH]DJRULYRLQ
HOHNWULNR ,62
Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components
(ISO 15584:2001)
Kleine Wasserfahrzeuge - Einbau-Benzinmotoren - Fest am Motor montierte Bauteile für
die Kraftstoff- und Stromversorgung (ISO 15584:2001)
Petits navires - Moteurs intérieurs à essence - Éléments des circuits d'alimentation et
des systèmes électriques (ISO 15584:2001)
Ta slovenski standard je istoveten z: EN ISO 15584:2017
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 ýROQL Small craft
SIST EN ISO 15584:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15584:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 15584:2017


EN ISO 15584
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2017
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 15584:2001
English Version

Small craft - Inboard petrol engines - Engine-mounted fuel
and electrical components (ISO 15584:2001)
Petits navires - Moteurs intérieurs à essence - Éléments Kleine Wasserfahrzeuge - Einbau-Benzinmotoren -
des circuits d'alimentation et des systèmes électriques Fest am Motor montierte Bauteile für die Kraftstoff-
(ISO 15584:2001) und Stromversorgung (ISO 15584:2001)
This European Standard was approved by CEN on 16 July 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15584:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15584:2017
EN ISO 15584:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15584:2017
EN ISO 15584:2017 (E)
European foreword
The text of ISO 15584:2001 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 15584:2017.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15584:2001.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.