EN 16603-20-21:2020
(Main)Space engineering - Interface requirements for electrical actuators
Space engineering - Interface requirements for electrical actuators
In general terms, the scope of the consolidation of the electrical interface requirements for electrical (hold down and release or deployment) actuators in the present ECSS-E-ST-20-21 and the relevant explanation in the handbook ECSS-E-HB-20-21 is to allow a more recurrent approach both for actuator electronics (power source) and electrical actuators (power load) offered by the relevant manufacturers, at the benefit of the system integrators and of the Agency, thus ensuring:
- better quality,
- stability of performances, and
- independence of the products from specific mission targets.
A recurrent approach enables manufacturing companies to concentrate on products and a small step improvement approach that is the basis of a high quality industrial output.
Raumfahrttechnik - Anforderungen an Schnittstellen für elektrische Stellantriebe
This activity will be the joint development of EN 16603-20-21.
This standard identifies the requirements needed to specify, procure or develop the electronics needed for driving release actuators (bot explosive like pyros or nonexplosive like thermal knives) and gives the relevant electrical interface specification, both from source and load perspective.
Ingénierie spatiale - Exigences d'interface pour les actionneurs électriques
D’une manière générale, la consolidation des exigences en matière d'interface électrique pour les actionneurs électriques (à maintien et à déclenchement, ou à déploiement) dans l'actuelle ECSS-E-ST-20-21 et l’explication correspondante qui en est faite dans le manuel ECSS-E-HB-20-21 ont pour but de permettre une approche plus récurrente tant pour les électroniques d’actionneurs (alimentation) que pour les actionneurs électriques (charge) proposés par les fabricants concernés, dans l’intérêt des intégrateurs de système et de l'Agence, assurant ainsi :
- une meilleure qualité ;
- la stabilité des performances ; et
- l’indépendance des produits par rapport à des objectifs de mission spécifiques.
Une approche récurrente permet aux entreprises de fabrication de se concentrer sur les produits et d’adopter une approche d’amélioration par petites étapes à la base d’une production industrielle de haute qualité.
Vesoljska tehnika - Zahteve vmesnika za električne pogone
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16603-20-21:2020
01-september-2020
Vesoljska tehnika - Zahteve vmesnika za električne pogone
Space engineering - Interface requirements for electrical actuators
Raumfahrttechnik - Anforderungen an Schnittstellen für elektrische Aktuatoren
Ingénierie spatiale - Exigences d'interface pour les actuateurs électriques
Ta slovenski standard je istoveten z: EN 16603-20-21:2020
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16603-20-21:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16603-20-21:2020
---------------------- Page: 2 ----------------------
SIST EN 16603-20-21:2020
EUROPEAN STANDARD
EN 16603-20-21
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 49.140
English version
Space engineering - Interface requirements for electrical
actuators
Ingénierie spatiale - Exigences d'interface pour les Raumfahrttechnik - Anforderungen an Schnittstellen
actionneurs électriques für elektrische Aktuatoren
This European Standard was approved by CEN on 24 May 2020.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2020 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN 16603-20-21:2020 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16603-20-21:2020
EN 16603-20-21:2020 (E)
Table of contents
European Foreword . 4
Introduction . 5
Scope . 6
Normative references . 7
Terms, definitions and abbreviated terms . 8
3.1 Terms from other standards . 8
3.2 Terms specific to the present standard . 8
3.3 Abbreviated terms. 10
3.4 Nomenclature . 10
Principles . 11
4.1 Standard assumptions . 11
4.2 Verification . 11
Requirements . 12
5.1 Functional general interface requirements . 12
5.1.1 General . 12
5.1.2 Reliability . 12
5.2 Functional source interface requirements . 13
5.2.1 General . 13
5.2.2 Reliability .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.