prEN 14324
(Main)Brazing - Guidance on the application of brazed joints
Brazing - Guidance on the application of brazed joints
This European Standard gives guidance on the application of brazing and the manufacture of brazed joints. This standard gives an introduction to brazing and a basis for the understanding and use of brazing in different applications. Because of the wide range of applications of brazing, this standard does not give detailed guidance that might be product specific. For such information, reference should be made to the appropriate product standard or, for applications where this does not exist, the relevant criteria should be clearly established before any brazing is undertaken.
This standard covers joint design and assembly, material aspects for both parent material and filler materials, brazing process and process variables, pre- and post-braze treatment and inspection.
Hartlöten - Anleitung zur Anwendung hartgelöteter Verbindungen
Diese Europäische Norm gibt eine Anleitung zur Anwendung von hartgelöteten Verbindungen. Diese Norm gibt eine Einführung in das Hartlöten und eine Grundlage zum Verständnis und zum Gebrauch des Hartlötens für unterschiedliche Anwendungen. Diese Norm gibt keine detaillierten Anleitungen, da der Anwendungsbereich des Hartlötens sehr breit und produktspezifisch sein kann. Für solche Informationen sollte die entsprechende Produktnorm als Referenz dienen, oder für Anwendungen, wo diese nicht vorhanden sind, sollten die wichtigen Kriterien vor der Durchführung des Hartlötens genau feststehen.
Diese Norm behandelt die Konstruktion und die Montage, die Aspekte der Grund- und Zusatzwerkstoffe, den Hartlötprozess und Unterschiede in den Prozessen, Vor- und Nachbehandlung sowie die Inspektion.
Brasage fort - Guide d’application pour les assemblages réalisés par brasage fort
La présente Norme européenne constitue un guide d’application pour les assemblages par brasage fort. La présente norme représente une introduction au brasage fort et une base pour la compréhension et l’emploi du brasage fort pour différentes applications. En raison du vaste champ d’application du brasage fort, la présente norme n’est pas un guide détaillé spécifique d’un produit. Dans le cas où de telles informations sont nécessaires, il convient de faire référence aux normes de produits adéquates ou bien, dans le cas où de telles normes n’existent pas, convient-il de fixer de façon claire les critères appropriés avant d’entreprendre toute opération de brasage fort.
La présente norme couvre la conception des joints et l’assemblage, les aspects relatifs aux matériaux à la fois pour le matériau de base et les matériaux d’apport, le processus de brasage fort et les variables opératoires, les traitements avant et après brasage fort et l’inspection.
Trdo spajkanje - Navodilo za uporabo trdo spajkanih spojev
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14324:2017
01-september-2017
Trdo spajkanje - Navodilo za uporabo trdo spajkanih spojev
Brazing - Guidance on the application of brazed joints
Hartlöten - Anleitung zur Anwendung hartgelöteter Verbindungen
Brasage fort - Guide d’application pour les assemblages réalisés par brasage fort
Ta slovenski standard je istoveten z: prEN 14324
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
oSIST prEN 14324:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14324:2017
---------------------- Page: 2 ----------------------
oSIST prEN 14324:2017
DRAFT
EUROPEAN STANDARD
prEN 14324
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2017
ICS 25.160.50 Will supersede EN 14324:2004
English Version
Brazing - Guidance on the application of brazed joints
Brasage fort - Guide d'application pour les assemblages Hartlöten - Anleitung zur Anwendung hartgelöteter
réalisés par brasage fort Verbindungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14324:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14324:2017
prEN 14324:2017 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Joint design . 7
4.1 Principle . 7
4.2 Types of joint . 7
4.3 Assembly gap and brazing gap . 8
4.3.1 General . 8
4.3.2 Influence of brazing filler materials . 11
4.3.3 Influence of parent material .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.