EN 12899-2:2007/FprA1

Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)

This Part 2 of EN 12899 specifies requirements for new transilluminated traffic bollards (TTBs) including their fixing, which may incorporate traffic signs (type 1 TTB) or may support traffic signs (type 2 TTB) to be used in traffic circulation areas. It covers performance requirements and test methods. Colorimetric and retroreflective properties as well as luminance of transilluminated illuminated portions are specified taking into account CIE recommendations. Structural requirements for TTBs include performance under static and dynamic loading. Provision is made for safety in use, including vehicle impact. Devices of similar function, but without transillumination or less than 600 mm in height, are not covered. NOTE Foundations are not specified in this standard but should be adequate to support the loads to be carried. Unless otherwise stated, clauses in this standard apply to both type 1 and type 2 TTBs.

Ortsfeste, vertikale Straßenverkehrszeichen - Teil 2: Innenbeleuchtete Verkehrsleitsäulen (TTB)

Signaux fixes de signalisation routière verticale - Partie 2: Bornes lumineuses

Stalna vertikalna cestna signalizacija - 2. del: Signalizacija z notranjo osvetlitvijo (TTB)

General Information

• Status: Not Published
• Publication Date: 19-May-2013
• Withdrawal Date: 28-Feb-2014
• ICS: 93.080.30 - Road equipment and installations
• Technical Committee: CEN/TC 226 - Road equipment
• Drafting Committee: CEN/TC 226/WG 3 - Vertical signs
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Start Date: 27-Aug-2013
• Completion Date: 27-Aug-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
• Ref Project: SIST EN 12899-2:2008/kFprA1:2012 - Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)

Relations

• Amends: EN 12899-2:2007 - Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
• Effective Date: 29-Jun-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12899-2:2008/kFprA1:2012
01-december-2012
Stalna vertikalna cestna signalizacija - 2. del: Signalizacija z notranjo osvetlitvijo
(TTB)
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
Ortsfeste, vertikale Straßenverkehrszeichen - Teil 2: Innenbeleuchtete
Verkehrsleitsäulen (TTB)
Signaux fixes de signalisation routière verticale - Partie 2: Bornes lumineuses
Ta slovenski standard je istoveten z: EN 12899-2:2007/FprA1
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 12899-2:2008/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12899-2:2008/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 12899-2:2008/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 12899-2:2007
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
September 2012
ICS 93.080.30
English Version
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic
bollards (TTB)
Signaux fixes de signalisation routière verticale - Partie 2: Ortsfeste, vertikale Straßenverkehrszeichen - Teil 2:
Bornes lumineuses Innenbeleuchtete Verkehrsleitsäulen (TTB)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 226.

This draft amendment A1, if approved, will modify the European Standard EN 12899-2:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12899-2:2007/FprA1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12899-2:2008/kFprA1:2012
EN 12899-2:2007/FprA1:2012 (E)


Foreword

This document (EN 12899-2:2007/FprA1:2012) has been prepared by Technical Committee
CEN/TC 226 ''Road equipment'' the secretariat of which is held by AFNOR.

This document is currently submitted to the Unique Acceptance Procedure.

This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of
this document.

The main reason for this amendment is to incorporate in the series of existing standards
EN 12899:2007 (Parts 1 to 5), a new standard EN 12899-6, which deals with the visual
performance of retroreflective sign face materials.
2

---------------------- Page: 4 ----------------------

SIST EN 12899-2:2008/kFprA1:2012
EN 12899-2:2007/FprA1:2012 (E)

1 Modification to the Contents
Update the table of contents.

2 Modifications to the Foreword
rd
Insert the following text as 3 paragraph:
“The main reason for this amendment is to incorporate in the series of existing standards
EN 12899:2007 (Parts 1 to 5), a new standard EN 12899-6, which deals with the visual
performance of retroreflective sign face materials."
Replace the introductory sentence to the list of parts, as given in paragraph 6, with the
following text:
“This document is a European Standard in the series of standards EN 12899 on "Fixed,
vertical road traffic signs”, with the followings parts:”
In paragraph 6, add “Part 6: Performance of retroreflective sign face materials” to the end of
the list.

3 Modifications t
...