EN ISO 13351:2008
(Main)Industrial fans - Dimensions (ISO 13351:1996)
Industrial fans - Dimensions (ISO 13351:1996)
This European Standard specifies size designations for industrial fans and specifies dimensions for the circular and rectangular flanges of
general purpose industrial fans as defined in 3.1.1. It does not apply to cross-flow fans, or fan appliances used for household or similar
applications.
For circular flanges, this International Standard provides two different flange series, one for standard casing thicknesses and a second for heavy duty fans as used on board sea-going vessels or in heavy industry. In order not to restrict fan designs unduly, only the pitch diameter, hole numbers and hole diameters are standardized. Flange thickness as well as internal and external flange diameters can be chosen freely within the limits of good engineering practice.
Ventilateurs industriels - Dimensions (ISO 13351:1996)
Industrijski ventilatorji - Mere (ISO 13351:1996)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrijski ventilatorji - Mere (ISO 13351:1996)Ventilateurs industriels - Dimensions (ISO 13351:1996)Industrial fans - Dimensions (ISO 13351:1996)23.120QDSUDYHVentilators. Fans. Air-conditionersICS:Ta slovenski standard je istoveten z:EN ISO 13351:2008SIST EN ISO 13351:2009en01-april-2009SIST EN ISO 13351:2009SLOVENSKI
STANDARD
SIST EN ISO 13351:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13351October 2008ICS 23.120 English VersionIndustrial fans - Dimensions (ISO 13351:1996)Ventilateurs industriels - Dimensions (ISO 13351:1996)This European Standard was approved by CEN on 2 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 13351:2008: ESIST EN ISO 13351:2009
EN ISO 13351:2008 (E) 2 Contents Page Foreword.3
SIST EN ISO 13351:2009
EN ISO 13351:2008 (E) 3 Foreword The text of ISO 13351:1996 has been prepared by Technical Committee ISO/TC 117 “Industrial fans” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 13351:2008 by Technical Committee CEN/TC 156 “Ventilation for buildings” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 13351:1996 has been approved by CEN as a EN ISO 13351:2008 without any modification.
SIST EN ISO 13351:2009
SIST EN ISO 13351:2009
INTERNATIONAL STANDARD IS0 13351 First edition 1996-06-15 Industrial fans - Dimensions Ven tila teurs indus tie/s - Dimensions Reference number IS0 13351:1996(E) SIST EN ISO 13351:2009
IS0 13351:1996(E) Foreword IS0 (the International Organization for eration of national standards bodies preparing International Standards is technical committees. Each membe Standardization) is a worldwide fed- IS0 member bodies). The work of normally carried out through IS0 body interested in a subject for which a technical committee has been established has the right to be rep- resented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 col- laborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are cir- culated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 13351 was prepared by Technical Committee ISOfTC 117, Industrial fans. 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be repro- duced or utilized in any form or b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.