EN 17647:2022

General principles for manufacturing, filling and holding e-liquids for prefilled containers or products

This document establishes the general principles for manufacturing, filling and holding e-liquids for prefilled containers or products.
FprCEN/TS 17633 and FprEN 17648 are intended to be used in conjunction with this document.

Allgemeine Grundsätze für die Herstellung, Abfüllung und Aufbewahrung von E-Liquids für vorgefüllte Behälter oder Produkte

Dieses Dokument legt die allgemeinen Grundsätze für die Herstellung, Abfüllung und Aufbewahrung von E Liquids für vorgefüllte Behälter oder Produkte fest.
FprCEN/TS 17633 und FprEN 17648 sind dafür vorgesehen, in Verbindung mit diesem Dokument angewendet zu werden.

Principes généraux de fabrication, de remplissage et de conservation des e-liquides pour les récipients de recharge ou les cartouches préremplies

Le présent document établit les principes généraux de fabrication, de remplissage et de conservation des e-liquides pour les récipients de recharge ou les produits préremplis.
Les FprCEN/TS 17633  et FprEN 17648  sont destinés à être utilisés conjointement avec le présent document.

Splošna načela izdelave, polnjenja in shranjevanja e-tekočin za predhodno napolnjene posode ali izdelke

Uporablja se za izdelavo ter uporabo pri izdelavi tekočin, namenjenih za elektronske cigarete in podobne naprave, ki proizvajajo paro in se uporabljajo za proizvodnjo aerosola za vdihavanje. Uporablja se za tekočine z nikotinom ali brez. Ta standard določa minimalne varnostne in kakovostne zahteve za izdelavo takih tekočin ter za njihovo polnjenje in shranjevanje, kadar se uporabljajo pri izdelavi predhodno napolnjenih elektronskih cigaret.

General Information

• Status: Published
• Publication Date: 26-Jul-2022
• Withdrawal Date: 30-Jan-2023
• ICS: 65.160 - Tobacco, tobacco products and related equipment
• Technical Committee: CEN/TC 437 - Electronic cigarettes and e-liquids
• Drafting Committee: CEN/TC 437/WG 3 - Requirements and test methods for e-liquids
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Jul-2022
• Due Date: 14-Oct-2022
• Completion Date: 27-Jul-2022
• Ref Project: SIST EN 17647:2022 - General principles for manufacturing, filling and holding e-liquids for prefilled containers or products

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17647:2022
01-september-2022
Splošna načela izdelave, polnjenja in shranjevanja e-tekočin za predhodno
napolnjene posode ali izdelke
General principles for manufacturing, filling and holding e-liquids for prefilled containers
or products
Allgemeine Grundsätze für die Herstellung, Abfüllung und Aufbewahrung von E-Liquids
für vorgefüllte Behälter oder Produkte
Principes généraux de fabrication, de remplissage et de conservation des e-liquides pour
les récipients de recharge ou les cartouches préremplies
Ta slovenski standard je istoveten z: EN 17647:2022
ICS:
65.160 Tobak, tobačni izdelki in Tobacco, tobacco products
oprema and related equipment
SIST EN 17647:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17647:2022

---------------------- Page: 2 ----------------------
SIST EN 17647:2022


EN 17647
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2022
EUROPÄISCHE NORM
ICS 65.160
English Version

General principles for manufacturing, filling and holding e-
liquids for prefilled containers or products
Principes généraux de fabrication, de remplissage et de Allgemeine Grundsätze für die Herstellung, Abfüllung
conservation des e-liquides pour les récipients de und Aufbewahrung von E-Liquids für vorgefüllte
recharge ou les cartouches préremplies Behälter oder Produkte
This European Standard was approved by CEN on 13 June 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17647:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17647:2022
EN 17647:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 E-liquid manufacturing . 7
4.1 Quality system . 7
4.2 Process . 7
4.2.1 Manufacturing facilities . 7
4.2.2 Production equipment . 7
4.2.3 Process control . 7
4.2.4 Product and production specification . 9
4.2.5 Batch traceability .
...