Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)

ISO 12181-2:2011 specifies the complete specification operator for roundness of integral features only and covers complete roundness profiles only, i.e. geometrical characteristics of features of the type circle.

Geometrische Produktspezifikation (GPS) - Rundheit - Teil 2: Spezifikationsoperatoren (ISO 12181-2:2011)

Dieser Teil von ISO 12181 legt den vollständigen Spezifikationsoperator für Rundheit, d. h. geometrische Merkmale von Geometrieelementen der Art eines Kreises fest und betrifft nur vollständig geschlossene Rundheitsprofile.

Spécification géométrique des produits (GPS) - Circularité - Partie 2: Opérateurs de spécification (ISO 12181-2:2011 )

L'ISO 12181-2:2011 spécifie l'opérateur de spécification complet pour la circularité des éléments intégraux uniquement et couvre uniquement les profils de circularité complets, c'est-à-dire les caractéristiques géométriques des éléments de type cercle.

Specifikacija geometrijskih veličin izdelka - Krožnost - 2. del: Parametri za specifikacijo (ISO 12181-2:2011)

Ta del ISO 12181 določa celotne parametre samo za specifikacijo krožnosti vgrajenih funkcij in zajema samo celotne krožne profile, tj. geometrijske značilnosti funkcij tipskega kroga.

General Information

Status
Published
Publication Date
31-Mar-2011
Withdrawal Date
30-Oct-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Apr-2011
Completion Date
01-Apr-2011

Relations

Buy Standard

Standard
EN ISO 12181-2:2011
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 12181-2:2009
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12181-2:2011
01-oktober-2011
1DGRPHãþD
SIST-TS CEN ISO/TS 12181-2:2008
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND.URåQRVWGHO3DUDPHWUL]D
VSHFLILNDFLMR ,62
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators
(ISO 12181-2:2011)
Geometrische Produktspezifikation (GPS) - Rundheit - Teil 2: Spezifikationsoperatoren
(ISO 12181-2:2011)
Spécification géométrique des produits (GPS) - Circularité - Partie 2: Opérateurs de
spécification (ISO 12181-2:2011)
Ta slovenski standard je istoveten z: EN ISO 12181-2:2011
ICS:
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 12181-2:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12181-2:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 12181-2:2011


EUROPEAN STANDARD
EN ISO 12181-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 17.040.20 Supersedes CEN ISO/TS 12181-2:2007
English Version
Geometrical product specifications (GPS) - Roundness - Part 2:
Specification operators (ISO 12181-2:2011)
Spécification géométrique des produits (GPS) - Circularité - Geometrische Produktspezifikation (GPS) - Rundheit - Teil
Partie 2: Opérateurs de spécification (ISO 12181-2:2011 ) 2: Spezifikationsoperatoren (ISO 12181-2:2011)
This European Standard was approved by CEN on 17 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12181-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12181-2:2011
EN ISO 12181-2:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12181-2:2011
EN ISO 12181-2:2011 (E)
Foreword
This document (EN ISO 12181-2:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 12181-2:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12181-2:2011 has been approved by CEN as a EN ISO 12181-2:2011 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 12181-2:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 12181-2:2011

INTERNATIONAL ISO
STANDARD 12181-2
First edition
2011-04-01

Geometrica
...

SLOVENSKI STANDARD
oSIST prEN ISO 12181-2:2009
01-julij-2009
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND.URåQRVWGHO3DUDPHWUL]D
VSHFLILNDFLMR ,62',6
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators
(ISO/DIS 12181-2:2009)
Geometrische Produktspezifikation (GPS) - Rundheit - Teil 2: Spezifikationsoperatoren
(ISO/DIS 12181-2:2009)
Spécification géométrique des produits (GPS) - Circularité - Partie 2: Opérateurs de
spécification(ISO/DIS 12181-2:2009)
Ta slovenski standard je istoveten z: prEN ISO 12181-2
ICS:
17.040.20 Lastnosti površin Properties of surfaces
oSIST prEN ISO 12181-2:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12181-2:2009

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12181-2:2009
EUROPEAN STANDARD
DRAFT
prEN ISO 12181-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS 17.040.20 Will supersede CEN ISO/TS 12181-2:2007
English Version
Geometrical product specifications (GPS) - Roundness - Part 2:
Specification operators (ISO/DIS 12181-2:2009)
Spécification géométrique des produits (GPS) - Circularité - Geometrische Produktspezifikation (GPS) - Rundheit - Teil
Partie 2: Opérateurs de spécification(ISO/DIS 12181- 2: Spezifikationsoperatoren (ISO/DIS 12181-2:2009)
2:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 290.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 12181-2:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12181-2:2009
prEN ISO 12181-2:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 12181-2:2009
prEN ISO 12181-2:2009 (E)
Foreword
This document (prEN ISO 12181-2:2009) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification”, the secretariat
of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
This document will supersede CEN ISO/TS 12181-2:2007.
Endorsement notice
The text of ISO/DIS 12181-2:2009 has been approved by CEN as a prEN ISO 12181-2:2009 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 12181-2:2009

---------------------- Page: 6 ----------------------
oSIST prEN ISO 12181-2:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 12181-2
ISO/TC 213 Secretariat: DS
Voting begins on: Voting terminates on:
2009-05-14 2009-10-14
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical product specifications (GPS) — Roundness —
Part 2:
Specification operators
Spécification géométrique des produits (GPS) — Circularité —
Partie 2: Opérateurs de spécification
(Revision of ISO/TS 12181-2:2003)
ICS 17.040.20

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.