EN 1440:2005
(Main)LPG equipment and accessories - Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
LPG equipment and accessories - Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
This European Standard specifies inspection intervals, procedures for periodic inspection and testing, for transportable refillable welded and brazed steel LPG cylinders of water capacity from 0,5 l up to and including 150 l with a minimum wall thickness of 1,5 mm (see EN 1442 and EN 12807).
This standard does not apply to cylinders permanently installed in vehicles, or to plant and filling equipment.
Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche wiederbefüllbare geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Wiederkehrende Prüfung
Diese Europäische Norm legt Zeiträume und Verfahren für die wiederkehrende Prüfung und Prüfung für ortsbewegliche und wiederbefüllbare geschweißte und hartgelötete Flüssiggasflaschen aus Stahl mit einem Fassungsvermögen von 0,5 l bis 150 l mit einer Mindestwanddicke von 1,5 mm, (siehe EN 1442 und EN 12807) fest.
Diese Norm gilt nicht für Flaschen, die dauerhaft in Fahrzeugen, Anlagen und Fülleinrichtungen eingebaut sind.
Equipements pour GPL et leurs accessoires - Bouteilles en acier soudé et brasé transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Contrôle périodique
La présente Norme européenne indique la fréquence des contrôles périodiques, les procédures de contrôle et essais applicables aux bouteilles en acier soudé et brasé transportables et rechargeables pour GPL, d’une capacité en eau de 0,5 l à 150 l inclus, avec une épaisseur minimale de paroi de 1,5 mm (voir EN 1442 et EN 12807).
La présente norme ne s’applique ni aux bouteilles installées en permanence dans des véhicules ni aux centres de remplissage, ni à leurs équipements.
Oprema in pribor za utekočinjeni naftni plin (UNP) – Premične, ponovno polnljive varjene in trdo spajkane jeklene jeklenke za UNP – Periodični pregledi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LPG equipment and accessories - Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspectionJOHGLEquipements pour GPL et leurs accessoires - Bouteilles en acier soudé et brasé transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Contrôle périodiqueFlüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche wiederbefüllbare geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Wiederkehrende PrüfungTa slovenski standard je istoveten z:EN 1440:2005SIST EN 1440:2006en23.020.30ICS:SIST EN 1440:1998/AC:2000SIST EN 1440:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1440:200601-marec-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1440November 2005ICS 23.020.30Supersedes EN 1440:1996
English VersionLPG equipment and accessories - Transportable refillablewelded and brazed steel Liquefied Petroleum Gas (LPG)cylinders - Periodic inspectionEquipements pour GPL et leurs accessoires - Bouteilles enacier soudé et brasé transportables et rechargeables pourgaz de pétrole liquéfié (GPL) - Contrôle périodiqueFlüssiggas-Geräte und Ausrüstungsteile - Ortsbeweglichewiederbefüllbare geschweißte Flaschen aus Stahl fürFlüssiggas (LPG) - Wiederkehrende PrüfungThis European Standard was approved by CEN on 7 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1440:2005: E
Requirements for 15-year periodic inspection interval.16 A.1 General.16 A.2 Concept of control.16 A.3 Conditions.16 Annex B (normative)
Periodic inspection procedure for a particular design of protected cylinder.18 B.1 Scope and cylinder description.18 B.2 Cylinders design and manufacturing requirements.19 B.2.1 Steel vessel.19 B.2.2 External protection.19 B.2.3 Marking and recording requirements.19 B.3 Inspection at filling.19 B.4 Periodic destructive tests on batch sampling.19 B.4.1 Testing procedure.19 B.4.2 Destructive tests.20 B.4.3 Rejection criteria and batch sampling.20
Therefore the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID and/or in the technical annexes of the ADR. This European Standard
supersedes EN 1440:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Periodic inspection is normally carried out at a test station operated under the responsibility of a competent gas organisation, or of a third party.
This European Standard has now been prepared to reflect the current state of the art for periodically inspecting LPG cylinders, and is based upon the operating experience of many hundreds of millions of cylinder years of service. This European Standard calls for the use of substances and procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this European Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people. Where judgements are called for, it has been assumed that they are made by competent persons who have been trained specifically for the tasks.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.