EN ISO 2819:2018
(Main)Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:2017)
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:2017)
ISO 2819:2017 specifies methods of checking the adhesion of electrodeposited and chemically deposited coatings. It is limited to tests of a qualitative nature.
ISO 2819:2017 does not describe certain tests that have been developed at various times to give a quantitative measure of adhesion of metallic coating to a substrate, since such tests require special apparatus and considerable skill in their performance which renders them unsuitable as quality control tests for production parts. Some of these quantitative tests can, however, be useful in research and development work.
Metallische Überzüge auf metallischen Grundwerkstoffen - Galvanische und chemische Überzüge - Überblick über Verfahren der Haftfestigkeitsprüfung (ISO 2819:2017)
Dieses Dokument legt Prüfverfahren für die Haftfestigkeit galvanisch und chemisch abgeschiedener Überzüge fest. Es ist auf Prüfungen qualitativer Natur beschränkt.
Dieses Dokument beschreibt nicht die Prüfungen, die zu verschiedenen Zeiten zur quantitativen Messung der Haftfestigkeit metallischer Überzüge auf einem Substrat entwickelt wurden; diese Prüfungen erfordern spezielle Geräte und ein beachtliches Können bei Ihrer Durchführung, und das macht sie als Prüfungen zur Qualitätskontrolle von Produktionsteilen ungeeignet. Einige dieser quantitativen Prüfungen können jedoch in der Forschungs- und Entwicklungsarbeit von Nutzen sein.
Revêtements métalliques sur bases métalliques - Dépôts électrolytiques et dépôts par voie chimique - Liste des différentes méthodes d'essai d'adhérence (ISO 2819:2017)
ISO 2819:2017 spécifie des méthodes de vérification de l'adhérence des dépôts électrolytiques et des dépôts effectués par voie chimique. Il se limite aux essais de nature qualitative.
ISO 2819:2017 ne décrit pas certains essais mis au point à différentes occasions pour effectuer un mesurage quantitatif de l'adhérence d'un revêtement métallique à un matériau de base, ces essais nécessitant un appareillage spécial et une manipulation experte les rendant impropres en tant qu'essais de contrôle de qualité pour pièces de série. Certains de ces essais quantitatifs sont néanmoins utiles pour les travaux de recherche théorique ou appliquée.
Kovinske prevleke na kovinskih podlagah - Galvansko in kemično nanesene prevleke - Pregled metod za preskus adhezivnosti (ISO 2819:2017)
Ta dokument določa metode preverjanja sprijemnosti elektrogalvanskih in kemično nanesenih prevlek. Omejuje se na kvalitativne preskuse.
Ta dokument ne opisuje določenih preskusov, ki so bili razviti v različnih trenutkih za kvantitativno merjenje sprijemnosti kovinske prevleke na podlago, saj je za takšne preskuse potrebno posebno orodje in ustrezno poznavanje njihove uporabe, zato niso primerni kot preskusi za nadziranje kakovosti proizvodnih delov. Nekatere od teh kvantitativnih preskusov pa je kljub temu mogoče uporabiti v raziskovalnem in razvojnem delu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2819:2018
01-maj-2018
1DGRPHãþD
SIST EN ISO 2819:1999
.RYLQVNHSUHYOHNHQDNRYLQVNLKSRGODJDK*DOYDQVNRLQNHPLþQRQDQHVHQH
SUHYOHNH3UHJOHGPHWRG]DSUHVNXVDGKH]LYQRVWL ,62
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited
coatings - Review of methods available for testing adhesion (ISO 2819:2017)
Metallische Überzüge auf metallischen Grundwerkstoffen - Galvanische und chemische
Überzüge - Überblick über Methoden der Haftfestigkeitsprüfung (ISO 2819:2017)
Revêtements métalliques sur bases métalliques - Dépôts électrolytiques et dépôts par
voie chimique - Liste des différentes méthodes d'essai d'adhérence (ISO 2819:2017)
Ta slovenski standard je istoveten z: EN ISO 2819:2018
ICS:
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 2819:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 2819:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 2819:2018
EN ISO 2819
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 25.220.40 Supersedes EN ISO 2819:1994
English Version
Metallic coatings on metallic substrates - Electrodeposited
and chemically deposited coatings - Review of methods
available for testing adhesion (ISO 2819:2017)
Revêtements métalliques sur bases métalliques - Metallische Überzüge auf metallischen
Dépôts électrolytiques et dépôts par voie chimique - Grundwerkstoffen - Galvanische und chemische
Liste des différentes méthodes d'essai d'adhérence Überzüge - Überblick über Methoden der
(ISO 2819:2017) Haftfestigkeitsprüfung (ISO 2819:2017)
This European Standard was approved by CEN on 1 December 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2819:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 2819:2018
EN ISO 2819:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 2819:2018
EN ISO 2819:2018 (E)
European foreword
This document (EN ISO 2819:2018) has been prepared by Technical Committee ISO/TC 107 “Metallic
and other inorganic coatings” in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2819:1994.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.