EN 15167-2:2006

Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation

This European Standard specifies the scheme for the evaluation of conformity of ground granulated blastfurnace slag according to EN 15167-1.
The European Standard provides technical rules for the production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity, the procedure for the certification of conformity and requirements for dispatching centres.

Hüttensandmehl zur Verwendung in Beton, Mörtel und Einpressmörtel - Teil 2: Konformitätsbewertung

Diese Europäische Norm legt das Verfahren für die Konformitätsbewertung von Hüttensandmehl nach prEN 15167 1 fest.
Diese Norm enthält technische Regeln für die Produktionskontrolle durch den Hersteller, einschließlich der internen Überwachungsprüfungen von Proben. Sie enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkonformität zu ergreifen sind, sowie das Verfahren für die Zertifizierung der Konformität und Anforde¬rungen an die Auslieferungsstellen.

Laitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis - Partie 2: Evaluation de la conformité

La présente Norme européenne définit la procédure d’évaluation de la conformité du laitier de haut-fourneau
granulé moulu conformément au prEN 15167-1.
La présente Norme européenne définit les règles techniques du contrôle de la production exercé par le
fabricant, y compris pour les essais d’autocontrôle réalisés sur des échantillons. Elle définit également les
règles relatives aux actions à suivre en cas de non-conformité, la procédure de certification de conformité et
les exigences applicables aux centres de distribution.

Grobozrnata plavžna žlindra za uporabo v betonu, malti in injekcijski malti – 2. del. Ovrednotenje skladnosti

General Information

• Status: Withdrawn
• Publication Date: 01-Aug-2006
• Withdrawal Date: 28-May-2024
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/WG 15 - Ground granulated blast furnace slag
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 15167-2:2006 - Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation

Relations

• Replaced By: EN 15167-2:2024 - Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance
• Effective Date: 26-Oct-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluationGrobozrnata plavžna žlindra za uporabo v betonu, malti in injekcijski malti – 2. del. Ovrednotenje skladnostiLaitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis - Partie 2: Evaluation de la conformitéHüttensandmehl zur Verwendung in Beton, Mörtel und Einpressmörtel - Teil 2: KonformitätsbewertungTa slovenski standard je istoveten z:EN 15167-2:2006SIST EN 15167-2:2006en91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:SLOVENSKI
STANDARDSIST EN 15167-2:200601-december-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15167-2August 2006ICS 91.100.15 English VersionGround granulated blast furnace slag for use in concrete, mortarand grout - Part 2: Conformity evaluationLaitier granulé de haut-fourneau moulu pour utilisation dansle béton, mortier et coulis - Partie 2: Evaluation de laconformitéHüttensandmehl zur Verwendung in Beton, Mörtel undEinpressmörtel - Teil 2: KonformitätsbewertungThis European Standard was approved by CEN on 26 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15167-2:2006: E

Evaluation of the representativeness and the accuracy of the 28 day activity index test results.22 A.1 General.22 A.2 Sets of results considered.22 A.3 Evaluation procedure.22 A.3.1 Introduction.22 A.3.2 Symbols.22 A.3.3 Evaluation of whether set A and set B belong to the same population (sampling error check).23 A.3.4 Comparison between set B and set C in order to check the accuracy of the autocontrol testing (testing error check).23 Bibliography.24
...