SIST EN 15167-2:2024
(Main)Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance
This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of ground granulated blast furnace slag, including certification of constancy of performance.
The document provides technical rules for the factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and the assessment of the performance of the ground granulated blast furnace slag, initial inspection of the manufacturing plant and of the factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and the requirement for depots.
This document is linked with the Annex ZA of the European Standard covering ground granulated blast furnace slag, i.e. EN 15167-1:2006.
Hüttensandmehl zur Verwendung in Beton, Mörtel und Einpressmörtel - Teil 2: Bewertung und Überprüfung der Leistungsbeständigkeit
Dieses Dokument legt das System für die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP, en: assessment and verification of constancy of performance) von Hüttensandmehl, einschließlich der Zertifizierung der Leistungsbeständigkeit, fest.
Das Dokument enthält technische Regeln für die werkseigene Produktionskontrolle, die zusätzliche Prüfung von im Herstellungsbetrieb entnommenen Proben (interne Überwachungsprüfung) und die Bewertung der Leistung von Hüttensandmehl, die Erstinspektion des Herstellungsbetriebs und der werkseigenen Produktionskontrolle und die Stichprobenprüfung (audit-testing) von Proben. Es enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkonformität zu ergreifen sind, sowie Anforderungen an Herstellerdepots.
Dieses Dokument ist verknüpft mit dem Anhang ZA der Europäischen Norm, die Hüttensandmehl behandelt, d. h. EN 15167 1:2006.
Laitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis - Partie 2 : Évaluation et vérification de la constance des performances
Le présent document définit le système d’évaluation et de vérification de la constance des performances (EVCP) du laitier granulé de haut-fourneau moulu, y compris la certification de la constance des performances.
Ce document fournit les règles techniques pour le contrôle de la production en usine, les essais supplémentaires d’échantillons prélevés dans l’établissement de fabrication (essais d’autocontrôle) et l’évaluation des performances du laitier granulé de haut-fourneau moulu, l’inspection initiale de l’établissement de fabrication et du contrôle de la production en usine et les essais par sondage des échantillons. Il fournit également les règles relatives aux actions à suivre en cas de non-conformité ainsi que les exigences applicables aux dépôts.
Le présent document est lié à l’Annexe ZA de la Norme européenne traitant du laitier granulé de haut-fourneau moulu, à savoir l’EN 15167-1:2006.
Grobozrnata plavžna žlindra za uporabo v betonu, malti in injekcijski malti - 2. del: Ocenjevanje in preverjanje nespremenljivih lastnosti snovi
Ta dokument določa shemo za ocenjevanje in preverjanje nespremenljivih lastnosti snovi (AVCP) za grobozrnato plavžno žlindro, vključno s certificiranjem nesprejemljivosti lastnosti snovi.
Ta dokument podaja tehnična pravila za kontrolo proizvodnje v obratu, nadaljnje preskušanje vzorcev v proizvodnem obratu (notranje kontrolno preskušanje) in ocenjevanje lastnosti grobozrnate plavžne žlindre, začetni pregled proizvodnega obrata in kontrole proizvodnje v obratu ter inšpekcijsko preskušanje vzorcev. Podaja tudi pravila za ukrepe, ki jih je treba izvesti v primeru neskladnosti, in zahteve za skladišča.
Ta dokument je povezan z dodatkom ZA evropskega standarda, ki obravnava grobozrnato plavžno žlindro, tj. EN 15167-1:2006.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Nadomešča:
SIST EN 15167-2:2006
Grobozrnata plavžna žlindra za uporabo v betonu, malti in injekcijski malti - 2. del:
Ocenjevanje in preverjanje nespremenljivih lastnosti snovi
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2:
Assessment and verification of constancy of performance
Hüttensandmehl zur Verwendung in Beton, Mörtel und Einpressmörtel - Teil 2:
Bewertung und Überprüfung der Leistungsbeständigkeit
Laitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis -
Partie 2 : Évaluation et vérification de la constance des performances
Ta slovenski standard je istoveten z: EN 15167-2:2024
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15167-2
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 91.100.15 Supersedes EN 15167-2:2006
English Version
Ground granulated blast furnace slag for use in concrete,
mortar and grout - Part 2: Assessment and verification of
constancy of performance
Laitier granulé de haut-fourneau moulu pour Hüttensandmehl zur Verwendung in Beton, Mörtel und
utilisation dans le béton, mortier et coulis - Partie 2 : Einpressmörtel - Teil 2: Bewertung und Überprüfung
Évaluation et vérification de la constance des der Leistungsbeständigkeit
performances
This European Standard was approved by CEN on 22 April 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15167-2:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and abbreviations . 4
3.1 Terms and definitions . 4
3.2 Abbreviations . 5
4 Factory production control . 6
4.1 General requirements . 6
4.2 Internal quality control . 7
4.3 Autocontrol testing of samples . 8
5 Tasks for the purpose of certification . 9
5.1 Assessment and verification of constancy of the performance of the ground granulated
blast furnace slag . 9
5.2 Initial inspection of the manufacturing plant and of factory production control . 9
5.3 Continuing surveillance, assessment and evaluation of factory production control . 10
5.4 Audit testing of samples taken at the factory/depot . 11
5.5 Reports . 12
5.6 Actions to be taken in the event of non-conformity . 12
6 Procedure for certification of constancy of performance of the product . 12
Annex A (normative) Evaluation of the representativeness and the accuracy of the 28-day
activity index test results . 15
A.1 General. 15
A.2 Sets of results considered . 15
A.3 Evaluation procedure . 15
Bibliography . 17
European foreword
This document (EN 15167-2:2024) has been prepared by Technical Committee CEN/TC 104 “Concrete”, the
secretariat of which is held by Standard Norway (SN).
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2024, and conflicting national standards shall be
withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15167-2:2006.
In comparison with the previous edition, the following technical modifications have been made:
a) use of the terminology given by the Delegated Regulation (EU) No 568/2014 amending Annex V to
Regulation (EU) No 305/2011 (Construction Products Regulation), in particular adoption of the tasks
defined in the Delegated Regulation for AVCP system 1+ for a re-arrangement of the clauses of this
document;
b) numbering of the clauses according to the order of the tasks specified in this Delegated Regulation;
c) removal of the rules for dispatching centres;
d) clarification/specification of the rules for depots;
e) replacement of the term ‘Works quality manual’ by ‘Works quality documentation’;
f) replacement of the term ‘management representative’ by ‘quality manager’;
g) editorial revision of the document.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards body. A
complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.
1 Scope
This document specifies the scheme for the assessment and verification of constancy of performance (AVCP)
of ground granulated blast furnace slag, including certification of constancy of performance.
The document provides technical rules for the factory production control, further testing of samples taken
at the manufacturing plant (autocontrol testing) and the assessment of the performance of the ground
granulated blast furnace slag, initial inspection of the manufacturing plant and of the factory production
control and audit testing of samples. It also provides rules for actions to be followed in the event of non-
conformity and the requirement for depots.
This document is linked with the European Standard covering ground granulated blast furnace slag, i.e.
EN 15167-1:2006.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 196-7, Methods of testing cement — Part 7: Methods of taking and preparing samples of cement
EN 15167-1:2006, Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1:
Definitions, specifications and conformity criteria
3 Terms, definitions and abbreviations
For the purposes of this document, the following terms, definitions and abbreviations apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp/
3.1 Terms and definitions
3.1.1
assessment of the performance
determination of the essential characteristics of a construction product, on the basis of testing (including
sampling), calculation, tabulated values or descriptive documentation of the product
3.1.2
certificate of constancy of performance of the product
document issued under the rules of the scheme for the AVCP indicating that adequate confidence is provided
that ground granulated blast furnace slag conforms to the performance(s) declared in accordance with
EN 15167-1
3.1.3
depot
bulk ground granulated blast furnace slag handling facility, not located at the factory, used for the dispatch
of ground granulated blast furnace slag, whether in bulk or bagged, after transfer or storage where the
manufacturer has full responsibility for all aspects of the quality of the ground granulated blast furnace slag
3.1.4
distributor
natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a
construction product available on the market
[SOURCE: Regulation (EU) no 305, Article 2 (Construction Product Regulation)]
3.1.5
existing factory
factory which is already producing ground granulated blast furnace slag certified using EN 15167-1
3.1.6
factory production control
documented, permanent and internal control of production in a factory
3.1.7
factory
facility used by a manufacturer for the production of ground granulated blast furnace slag using equipment
which is suitable for continuous mass production of ground granulated blast furnace slag
Note 1 to entry: This equipment and the production control applied allow the control of production with sufficient
accuracy to ensure that the requirements of EN 15167-1 are met.
Note 2 to entry: The factory shall have equipment for adequate grinding and homogenization and the necessary silo
capacity for the storage and dispatch of each ground granulated blast furnace slag produced.
3.1.8
importer
natural or legal person established within the European Union, who places a construction product from a
third country on the European Union market
[SOURCE: Regulation (EU) no 305, Article 2 (Construction Product Regulation)]
3.1.9
initial period
immediate period starting after the first issuing of the certificate of constancy of performance of the product
for a ground granulated blast furnace slag and at the latest from the first dispatching of ground granulated
blast furnace slag
3.1.10
new factory
factory which is not already producing ground granulated blast furnace slag certified using EN 15167-2
3.1.11
product certification body
body notified in accordance with Chapter VII of Regulation (EU) No305/2011 to carry out constancy of
performance certification
3.1.12
works’ quality documentation
documentation that provides information on the factory production control which is applied by a
manufacturer at a particular factory to ensure constancy of performance of the ground granulated blast
furnace slag
3.2 Abbreviations
AVCP Assessment and verification of constancy of performance
4 Factory production control
4.1 General requirements
4.1.1 Concept
Factory production control means the permanent internal control of ground granulated blast furnace slag
production and consists of internal quality control (see 4.2) completed by autocontrol testing of samples of
ground granulated blast furnace slag taken at the point of release (see 4.3).
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.