Energy Performance of Buildings - Inspection of Automation, Controls and Technical Building Management - Part 1: Module M10-11

This European Standard defines guidelines for the inspection of installed an operational Functions of Building Automation, Controls and Technical Building Managment System including its configuration.

Energetische Bewertung von Gebäuden- Inspektion der Gebäudeautomation, Regelungstechnik und des Technischen Gebäudemanagements - Teil 1: Modul M10-11

Diese Norm legt Leitlinien für die Inspektion von installierten und betrieblichen Funktionen der Gebäudeautomation und von Systemen des technischen Gebäudemanagements einschließlich deren Konfiguration fest.
Tabelle 1 zeigt die relative Position dieser Norm innerhalb des EPB-Normenpaketes im Kontext der in FprEN ISO 52000-1:2016 dargelegten modularen Struktur.
ANMERKUNG 1   In CEN ISO/TR 52000-2 findet sich die gleiche Tabelle mit den Nummern (für jedes Modul) der jeweiligen EPB-Normen und den dazugehörigen technischen Berichten, die bereits veröffentlicht wurden oder sich in der Erstellung befinden.
ANMERKUNG 2   Die Module repräsentieren EPB-Normen, auch wenn eine EPB-Norm mehr als ein Modul abdecken kann und ein Modul von mehr als einer EPB-Norm abgedeckt werden kann, zum Beispiel jeweils ein vereinfachtes und ein detailliertes Verfahren.

Performance énergétique des bâtiments - Inspection des systèmes d'automatisation, de régulation et de gestion technique des bâtiments - Partie 1 : Module M10-11

La présente Norme européenne définit les lignes directrices pour l'inspection des fonctions installées et opérationnelles du système d'automatisation, de régulation et de gestion technique des bâtiments, y compris sa configuration.
Le Tableau 1 indique la position relative de la présente norme au sein de l'ensemble de normes européennes PEB dans le contexte de la structure modulaire indiquée dans prEN ISO 52000-1 :2015.
NOTE 1    Le même tableau se trouve dans prEN ISO/TR 52000-2 :2014 avec, pour chaque module, le nombre des normes PEB et les rapports qui les accompagnent, publiés ou en préparation.
NOTE 2   Les modules représentent les normes PEB, bien qu’une norme peut recouvrir plus qu’un module et qu’un module peut être recouvert par plus qu’une norme PEB, comme par exemple une méthode simplifiée et une détaillée.

Energijske lastnosti stavb - Pregled avtomatike, regulacije in tehničnega upravljanja stavb - 1. del: Modul M10-11

Ta evropski standard določa smernice za nadzor nameščenih delujočih funkcij avtomatizacije stavb, nadzora in tehničnega upravljanja stavb, vključno s konfiguracijo.

General Information

Status
Published
Publication Date
18-Apr-2017
Withdrawal Date
30-Oct-2017
Current Stage

Buy Standard

Standard
EN 16946-1:2018 - BARVE
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.KQLþQHJDEnergetische Bewertung von Gebäuden- Inspektion der Gebäudeautomation, Regelungstechnik und des Technischen Gebäudemanagements - Teil 1: Modul M10-11Performance énergétique des bâtiments - Inspection des systèmes d'automatisation, de régulation et de gestion technique des bâtiments - Partie 1 : Module M10-11Energy Performance of Buildings - Inspection of Automation, Controls and Technical Building Management - Part 1: Module M10-1197.120Avtomatske krmilne naprave za domAutomatic controls for household use35.240.67Uporabniške rešitve IT v gradbeništvuIT applications in building and construction industryICS:Ta slovenski standard je istoveten z:EN 16946-1:2017SIST EN 16946-1:2018en,fr,de01-maj-2018SIST EN 16946-1:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16946-1
April
t r s y ICS
{ yä s t r English Version
Energy Performance of Buildings æ Inspection of Automationá Controls and Technical Building Management æ Part
sã Module M s ræ s s Performance énergétique des bâtiments æ Inspection des systèmes d 5automatisationá de régulation et de gestion technique des bâtiments æ Partie
s ã Module M s ræ s s
Energetische Bewertung von Gebäudenæ Inspektion der Gebäudeautomationá Regelungstechnik und des Technischen Gebäudemanagements æ Teil
sã Modul M s ræ s s This European Standard was approved by CEN on
t y February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x { v xæ sã t r s y ESIST EN 16946-1:2018

European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 7 3 Terms and definitions . 7 4 Overview . 7 5 Inspection method . 8 5.1 General . 8 5.2 Inspection procedure . 8 5.3 Major steps in the inspection . 8 5.4 Determination of energy efficiency contribution . 8 5.5 Weighting among building types . 9 5.6 BAC overall energy performance scale and evaluation . 9 6 Inspection of a BAC in the phases of BAC project . 9 6.1 General . 9 6.2 Design phase . 10 6.3 Engineering phase . 10 6.4 Installation phase . 10 6.5 Completion phase . 11 6.6 Documentation . 11 6.7 Operator instruction (training) . 11 6.8 Review and improve building performance . 12 6.9 Inspection of BACS sometime after the handover . 12 Annex A (informative)
Audit Processes . 13 Annex B (informative)
Schematic supply flow and controls functions influencing the efficiency . 14 Annex C (informative)
Key Performance Indicators . 15 C.1 General . 15 C.2 Characteristics of KPI's . 15 C.3 Gathering and evaluation method . 15 Bibliography . 17
Over-arching Building (as such) Technical Building System Submodule Descriptions Descriptions Descriptions Heating Cooling Ventilation Humidification Dehumidification Domestic Hot waters Lighting Building automation and control PV, wind, . sub1 M1 M2
M3 M4 M5 M6 M7 M8 M9 M10 M11 1 General General General
2 Common terms and definitions; symbols, units and subscripts Building Energy Needs Needs
3 Application (Free) Indoor Conditions without Systems Maximum Load and Power
4 Ways to Express Energy Performance Ways to Express Energy Performance Ways to Express Energy Performance
5 Building Functions and Building Boundaries Heat Transfer by Transmission Emission and control
6 Building Occupancy and Operating Conditions Heat Transfer by Infiltration and Ventilation Distribution and control
Over-arching Building (as such) Technical Building System Submodule Descriptions Descriptions Descriptions Heating Cooling Ventilation Humidification Dehumidification Domestic Hot waters Lighting Building automation and control PV, wind, . sub1 M1 M2
M3 M4 M5 M6 M7 M8 M9 M10 M11 7 Aggregation of Energy Services and Energy Carriers Internal Heat Gains Storage and control
8 Building Partitioning Solar Heat Gains Generation and control
9 Calculated Energy Performance Building Dynamics (thermal mass) Load dispatching and operating conditions
10 Measured Energy Performance Measured Energy Performance Measured Energy Performance
11 Inspection Inspection Inspection
x
12 Ways to Express Indoor Comfort
BMS
13 External Environment Conditions
14a Economic Calculation
a The shaded modules are not applicable. SIST EN 16946-1:2018
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.