EN 4689:2012
(Main)Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
This European Standard specifies the requirements for a two components flexible polyurethane top coat to be
applied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications.
The primer and the finish tested to this specification will be from the same manufacturer applied in accordance
with (i.a.w.) their instruction / Table 1.
Luft- und Raumfahrt - Beschichtungsstoffe - Zweikomponenten-Polyurethan-Decklack, raumtemperaturhärtend - Hohe Elastizität und Beständigkeit gegen Chemikalien für militärische Anwendung
Diese Europäische Norm legt die Anforderungen an eine dehnbare Zweikomponenten-Polyurethan-Deckbeschichtung, raumtemperaturhärtend, fest, die auf Grundbeschichtungen aus Grundbeschichtungs-stoffen nach EN 4687 und/oder EN 4688 aufzubringen und hauptsächlich für Anwendungen im Außenbereich in der Luft- und Raumfahrt vorgesehen ist.
Der Grundbeschichtungsstoff und der Deckbeschichtungsstoff, die nach dieser Anforderungsnorm geprüft werden, sind von demselben Hersteller und werden nach dessen Anweisungen (Tabelle 1) aufgetragen.
Série aérospatiale - Peinture et vernis - Peinture de finition polyuréthane à deux composants polymérisant à température ambiante - Haute flexibilité et résistance aux substances chimiques pour applications militaires
La présente norme européenne les exigences relatives aux couches de finition polyuréthane à deux composants, flexibles, applicables aux peintures primaires EN 4687 et/ou 4688 pour applications aéronautiques extérieures.
La peinture primaire et la couche de finition testées selon la présente spécification doivent provenir du même fabricant conformément à leurs instructions/au Tableau 1.
Aeronavtika - Barve in laki - Dvokomponentni poliuretanski lak, ki se strdi pri temperaturi okolja - Zelo elastičen in odporen proti kemikalijam, za vojaško uporabo
Ta evropski standard določa zahteve za dvokomponentni epoksidni temeljni premaz, ki učinkovito preprečuje korozijo. Premaz naj bi bil primeren za uporabo na ustrezno pripravljenih kovinskih podlagah, aluminijevih zlitinah, anodiziranih s kromovo kislino, ali z reakcijsko prevleko, sestavljenih materialih, ojačanih z vlakni, in drugih ustrezno pripravljenih podlagah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XSRUDERLuft- und Raumfahrt - Anstrichstoffe - Zweikomponenten Polyurethan- Decklack, raumtemperaturhärtend - Hohe Elastizität und Beständigkeit gegen Chemikalien für militärische AnwendungSérie aérospatiale - Peinture et vernis - Peinture de finition polyuréthane à deux composants polymérisant à température ambiante - Haute flexibilité et résistance aux substances chimiques pour applications militairesAerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 4689:2012SIST EN 4689:2012en01-september-2012SIST EN 4689:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4689
March 2012 ICS 49.040 English Version
Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
Série aérospatiale - Peinture et vernis - Peinture de finition polyuréthane à deux composants polymérisant à température ambiante - Haute flexibilité et résistance aux substances chimiques pour applications militaires
Luft- und Raumfahrt - Anstrichstoffe - Zweikomponenten Polyurethan- Decklack, raumtemperaturhärtend - Hohe Elastizität und Beständigkeit gegen Chemikalien für militärische Anwendung This European Standard was approved by CEN on 21 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4689:2012: ESIST EN 4689:2012
EN 4688, Aerospace series — Paints and varnishes — Corrosion inhibiting two components cold curing primer for military application
EN 6042, Aerospace series — Organic compounds — Test method — Analysis by infrared spectroscopy 1) EN ISO 1513, Paints and varnishes — Examination and preparation of test samples
1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). SIST EN 4689:2012
AMS 1527B, Cleaner for aircraft exterior surfaces water-miscible, foam-on, pressure-spraying 3) AMS 1533A, Cleaner for exterior aircraft surfaces gel-type, solvent-base 3) DEF STAN 68-10, Corrosion Preventive, Water Displacing NATO Code: C-634 Joint Service Designation: PX-24 STANAG 4477, Specification for Paints and Paint Systems, Resistant to Chemical Agents and Decontaminants, for the Protection of Aerospace Military Equipment 4)
BS 1595-1:1986, Propan-2-ol (isopropyl alcohol) for industrial use — Part 1: Specification for propan-2-ol (isopropyl alcohol).
2) Published by: DoD National (US) MIL. Department of Defense http://www.defenselink.mil/ 3) Published by: SAE National (US) Society of Automotive Engineers http://www.sae.org/. 4) Published by: NATO EU MIL. - National (US) Mil. North Atlantic Treaty Organization http://www.nato.int/docu/standar d.htm. SIST EN 4689:2012
In addition, the requirements for qualification of coatings in specific colours/gloss levels, shall be as defined in EN 3840. 6.3 Batch release testing The Manufacturer shall give evidence on the Test Report or the Certificate of Conformance that all the tests marked with the symbol * in this specification shall be performed for batch acceptance tests. 6.4 Compatibility of waterborne paints to solvent borne paints The waterborne top coat type III according to this specification shall be compatible to all primers qualified to EN 4687 and EN 4688. All tests to demonstrate the compatibility is defined in Tables 8 to 10 shall be performed. SIST EN 4689:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.