Thermostatic radiator valves - Requirements and test methods

This document specifies definitions, requirements and test methods for thermostatic radiator valves referred to hereafter as thermostatic valves.
This standard applies to two port thermostatic valves with or without pre-setting facility and thermostatic integrated valves with or without pre-setting facility for fitting to radiators in wet central heating installations up to a water temperature of 120 °C and a nominal pressure of PN 10.
This standard further specifies the dimensions, the materials and the connection details of four series of straight and angle pattern thermostatic radiator valves of nominal pressure ≤ PN 10.
This standard can be used as reference in a CEN/CENELEC Certification Mark System on thermostatic radiator valves.

Thermostatische Heizkörperventile - Anforderungen und Prüfung

Dieses Dokument hat den Zweck, Begriffe, Anforderungen und Prüfungen für thermostatische Heizkörper¬ventile, nachstehend Thermostatventile genannt, festzulegen.
Die vorliegende Norm ist auf thermostatische Zweiwegeventile mit oder ohne Voreinstellung und integrierte Thermostatventile mit oder ohne Voreinstellung anzuwenden, die zur Ausrüstung von Heizkörpern in Warmwasserheizungen bis zu einer Temperatur von 120 °C und bis zu einem Nenndruck von PN 10 dienen.
Die vorliegende Norm legt ferner die Maße, Werkstoffe und Ausführungen des Anschlusses von vier Reihen von thermostatischen Heizkörperventilen in Durchgangs  und Eckform mit Nenndruck ≤ PN 10 fest.
Auf diese Norm kann in einem CEN/CENELEC Zertifizierungssystem für thermostatische Heizkörperventile Bezug genommen werden.

Robinets thermostatiques d'équipement du corps de chauffe - Exigences et méthodes d'essai

Le présent document spécifie les définitions, les exigences et les méthodes d’essai applicables aux robinets thermostatiques d’équipement du corps de chauffe, ci-après dénommés « robinets thermostatiques ».
La présente norme s’applique aux robinets thermostatiques à deux voies avec ou sans dispositif de pré-réglage et aux robinets thermostatiques intégrés avec ou sans dispositif de pré-réglage destinés à une adaptation sur corps de chauffe dans des installations de chauffage central à eau avec une température d’eau allant jusqu’à 120 °C et une pression nominale allant jusqu’à PN 10.
La présente norme spécifie en outre les dimensions, les matériaux et les détails concernant le raccordement de quatre séries de robinets thermostatiques d’équipement du corps de chauffe droits et d’équerre présentant une pression nominale ≤ PN 10.
La présente norme peut être utilisée comme référence pour un Système de marques de certification CEN/CENELEC sur robinets thermostatiques d’équipement du corps de chauffe.

Termostatski ventili za ogrevala - Zahteve in preskusne metode

Ta evropski standard določa opredelitve, zahteve in preskusne metode za termostatske ventile za ogrevala (v nadaljevanju »termostatski ventili«). Ta standard se uporablja za termostatske ventile z dvema odcepoma ter z možnostjo vnaprejšnje nastavitve za namestitev na ogrevala v sistemih centralnega ogrevanja s temperaturo vode do 120 °C in nazivnim tlakom PN 10 (oziroma brez nje). Ta standard podrobneje določa dimenzije, materiale in podatke za priključitev štirih sklopov ravnih in kotnih termostatskih ventilov za ogrevala z nazivnim tlakom, ki je nižji oziroma enak PN 10. Na ta standard se je mogoče sklicevati v sistemu certifikacijskih oznak CEN/CENELEC v zvezi s termostatskimi ventili za ogrevala.

General Information

Status
Published
Publication Date
17-Sep-2019
Withdrawal Date
30-Mar-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Sep-2019
Due Date
24-Feb-2020
Completion Date
18-Sep-2019

Relations

Buy Standard

Standard
EN 215:2019
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 215:2018
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 215:2019
01-december-2019
Nadomešča:
SIST EN 215:2004
SIST EN 215:2004/A1:2006
Termostatski ventili za ogrevala - Zahteve in preskusne metode
Thermostatic radiator valves - Requirements and test methods
Thermostatische Heizkörperventile - Anforderungen und Prüfung
Robinets thermostatiques d'équipement du corps de chauffe - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 215:2019
ICS:
23.060.01 Ventili na splošno Valves in general
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
SIST EN 215:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 215:2019

---------------------- Page: 2 ----------------------
SIST EN 215:2019


EN 215
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 91.140.10 Supersedes EN 215:2004
English Version

Thermostatic radiator valves - Requirements and test
methods
Robinets thermostatiques d'équipement du corps de Thermostatische Heizkörperventile - Anforderungen
chauffe - Exigences et méthodes d'essai und Prüfung
This European Standard was approved by CEN on 29 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 215:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 215:2019
EN 215:2019 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 14
5 Requirements . 14
5.1 Dimensions . 14
5.2 Mechanical properties . 14
5.2.1 Resistance to pressure, leak-tightness of the valve body assembly . 14
5.2.2 Leak-tightness of the stem seal . 14
5.2.3 Resistance of the valve body assembly to a bending moment . 14
5.2.4 Resistance of the temperature selector to a torque . 15
5.2.5 Resistance of the temperature selector to a bending moment . 15
5.2.6 Exchange of the stem seal. 15
5.3 Operating characteristics .
...

SLOVENSKI STANDARD
oSIST prEN 215:2018
01-oktober-2018
Termostatski ventili za ogrevala - Zahteve in preskusne metode
Thermostatic radiator valves - Requirements and test methods
Thermostatische Heizkörperventile - Anforderungen und Prüfung
Robinets thermostatiques d'équipement du corps de chauffe - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: prEN 215
ICS:
23.060.01 Ventili na splošno Valves in general
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
oSIST prEN 215:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 215:2018

---------------------- Page: 2 ----------------------
oSIST prEN 215:2018


DRAFT
EUROPEAN STANDARD
prEN 215
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2018
ICS 91.140.10 Will supersede EN 215:2004
English Version

Thermostatic radiator valves - Requirements and test
methods
Robinets thermostatiques d'équipement du corps de Thermostatische Heizkörperventile - Anforderungen
chauffe - Exigences et méthodes d'essai und Prüfung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 130.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 215:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 215:2018
prEN 215:2018 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 14
5 Requirements . 14
5.1 Dimensions . 14
5.2 Mechanical properties . 14
5.2.1 Resistance to pressure, leak-tightness of the valve body assembly . 14
5.2.2 Leak-tightness of the stem seal . 14
5.2.3 Resistance of the valve body assembly to a bending moment . 14
5.2.4 Resistance of the temperature selector to a torque . 15
5.2.5 Resistance of the temperature selector to a bending moment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.