EN 14266:2003
(Main)Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : coating tar - Characteristics and test methods
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : coating tar - Characteristics and test methods
This European Standard specifies the methods of test required to determine the characteristics for "coating tar" used for coating.
Depending on the required application and the desired properties of the end product, different grades of coating tars are available.
Derivate der Kohlenpyrolyse - Bindemittel aus Steinkohlenteer und Steinkohlenteerpech und verwandte Produkte: Teere für Beschichtungssysteme - Anforderungen und Prüfverfahrung
Diese Europäische Norm legt Prüfverfahren zur Bestimmung der Eigenschaften von "Teer für Beschichtungssysteme" für industrielle Zwecke fest.
Abhängig von der geforderten Anwendung und den gewünschten Eigenschaften des Endproduktes sind unterschiedliche Klassen von "Teer für Beschichtungssysteme" erhältlich.
Produits dérivés de la pyrolyse du charbon - Liants à base de goudron et de brais issus de la houille et produits connexes: goudron d'enduisage - Caractéristiques et méthodes d'essai
La présente Norme européenne fournit les méthodes d'essai nécessaires à la détermination des caractéristiques du « goudron d'enduisage » utilisé à des fins industrielles.
En fonction de l'utilisation prévue et des propriétés souhaitées pour le produit fini, différentes catégories de goudrons d'enduisage existent.
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: coating tar - Characteristics and test methods
General Information
- Status
- Published
- Publication Date
- 02-Sep-2003
- Withdrawal Date
- 30-Mar-2004
- Technical Committee
- CEN/TC 317 - Derivates from coal from pyrolysis
- Drafting Committee
- CEN/TC 317/WG 3 - Coal tar and pitch based binders and related products
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 20-Feb-2024
- Completion Date
- 14-Apr-2025
Overview
EN 14266:2003 is a key European Standard developed by CEN that defines the characteristics and test methods for coating tar derived from coal pyrolysis. This standard specifically applies to coal tar and pitch-based binders and related products used for coating applications. Its primary purpose is to establish consistent testing procedures and specifications for different grades of coating tar to ensure quality and suitability for various industrial uses.
The standard supports manufacturers, suppliers, and users by providing detailed guidance on sampling, classification, testing, and handling of coating tar products. Complying with EN 14266 helps guarantee product reliability, safety, and performance within the European market and internationally.
Key Topics
Scope and Application
EN 14266 outlines test methods required to evaluate coating tar, focusing on physical and chemical characteristics relevant to coating processes. Different grades of coating tar are addressed to meet varied industrial requirements based on product end-use.Test Characteristics Covered
The standard mandates the determination of:- Distillation properties
- Viscosity levels
- Water content
Test Methods Referenced
The following standards are employed within EN 14266 to perform tests:- ISO 10336 for water content determination through Karl Fischer titration
- EN 13357 for viscosity measurement of bituminous binders
- BS 76 (Appendix D) for distillation procedures
Sampling Procedures
Sampling is defined per ISO 6257 to ensure representative tar samples are used whether from bulk, liquid form, or multiple container batches.Safety and Handling
Annex B provides essential safety warnings, first aid measures, and handling/storage best practices, highlighting the flammable nature of coating tar and necessary precautions during use.
Applications
EN 14266 serves multiple industries that utilize coal tar-based coating products:
- Protective coatings for pipelines, steel structures, and concrete to prevent corrosion
- Manufacture of waterproofing membranes and sealants
- Custom binder formulations for road surfacing and construction materials
- Industrial coatings requiring durability in harsh environmental conditions
By adhering to EN 14266, companies can ensure their coating tars meet quality and safety criteria, enhancing product consistency and regulatory compliance. The standard thereby supports enhanced performance in protective and functional coatings.
Related Standards
- EN 13847:2001 - Terminology and classification of coal tar and pitch based binders
- EN 13357 - Determination of efflux time for bituminous binders
- ISO 6257 - Sampling methods for carbonaceous materials including pitch
- ISO 10336 - Karl Fischer titration method for moisture in petroleum products
- BS 76 - Specifications and distillation methods for tars used in road applications
These interconnected standards complement EN 14266, providing a comprehensive framework for quality control and application of coal-derived tar products.
Keywords: EN 14266, coating tar standards, coal tar binders, pitch-based binders, characteristics test methods, coal pyrolysis derivatives, coating tar testing, viscosity measurement, distillation of tar, water content in tar, sampling coating tar, industrial coatings, CEN standards, European coating tar regulations.
Frequently Asked Questions
EN 14266:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : coating tar - Characteristics and test methods". This standard covers: This European Standard specifies the methods of test required to determine the characteristics for "coating tar" used for coating. Depending on the required application and the desired properties of the end product, different grades of coating tars are available.
This European Standard specifies the methods of test required to determine the characteristics for "coating tar" used for coating. Depending on the required application and the desired properties of the end product, different grades of coating tars are available.
EN 14266:2003 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN 14266:2003 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: coating tar - Characteristics and test methodsDerivate der Kohlenpyrolyse - Bindemittel aus Steinkohlenteer und Steinkohlenteerpech und verwandte Produkte: Teere für Beschichtungssysteme - Anforderungen und PrüfverfahrungProduits dérivés de la pyrolyse du charbon - Liants a base de goudron et de brais issus de la houille et produits connexes: goudron d'enduisage - Caractéristiques et méthodes d'essaiDerivatives from coal pyrolysis - Coal tar and pitch based binders and related products : coating tar - Characteristics and test methods75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 14266:2003SIST EN 14266:2003en01-december-2003SIST EN 14266:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14266September 2003ICS 75.140English versionDerivatives from coal pyrolysis - Coal tar and pitch basedbinders and related products : coating tar - Characteristics andtest methodsProduits dérivés de la pyrolyse du charbon - Liants à basede goudron et de brais issus de la houille et produitsconnexes: goudron d'enduisage - Caractéristiques etméthodes d'essaiDerivate der Kohlenpyrolyse - Bindemittel ausSteinkohlenteer und Steinkohlenteerpech und verwandteProdukte: Teere für Beschichtungssysteme -Anforderungen und PrüfverfahrungThis European Standard was approved by CEN on 10 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14266:2003 ESIST EN 14266:2003
Typical values.6Annex B (informative)
Warning to use .7B.1Composition - Data on components.7B.2First aid measures.7B.3Handling and storage.7B.4Disposal considerations.7SIST EN 14266:2003
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...