CEN ISO/TR 20172:2006

Welding - Grouping systems for materials - European materials (ISO/TR 20172:2006)

This Technical Report provides cross references between the grouping of materials specified in CEN ISO TR 15608 and European standards for materials.

Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2006)

Dieser Technische Bericht enthält eine europäische Gruppeneinteilung von Werkstoffen zum Schweißen, gegliedert nach der Gruppeneinteilung von ISO/TR 15608.
Er kann auch für andere Zwecke wie Wärmebehandlung, Umformen, zerstörungsfreie Prüfung angewendet werden. Stahlsorten nach der Gruppeneinteilung von ISO/TR 15608:2005, Tabelle 1.
Dieser Technische Bericht enthält eine Gruppeneinteilung für die nachstehend genannten genormten Werkstoffe:
-   Stahl;
-   Aluminium und seine Legierungen;
-   Kupfer und seine Legierungen;
-   Gusseisen.

Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR 20172:2006)

Varjenje – Razvrščanje materialov v skupine – Evropski materiali (ISO/TR 20172:2006)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2006
• Withdrawal Date: 14-Jun-2009
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 1 - Specification and qualification of welding procedures for metallic materials
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jun-2009
• Completion Date: 15-Jun-2009
• Ref Project: SIST-TP CEN ISO/TR 20172:2006 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2006)

Relations

• Replaced By: CEN ISO/TR 20172:2009 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI oSIST prCEN ISO/TR
20172:2005

PREDSTANDARD
maj 2005
Varjenje – Sistemi za razvrščanje materialov v skupine – Evropski materiali
(ISO/TR 20172:2005)
Welding - Grouping systems for materials - European materials (ISO/TR
20172:2005)
ICS 25.160.20 Referenčna številka
oSIST prCEN ISO/TR 20172:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

TECHNICAL REPORT
FINAL DRAFT
prCEN ISO/TR 20172
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
March 2005
ICS 25.160.20
English version
Welding - Grouping systems for materials - European materials
(ISO/TR 20172:2005)
Soudage - Systèmes de groupement des matériaux -
Matériaux européens (ISO/TR 20172:2005)
This draft Technical Report is submitted to CEN members for Technical Committee Approval. It has been drawn up by the Technical
Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a Technical Report.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prCEN ISO/TR 20172:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

prCEN ISO/TR 20172:2005 (E)






Foreword



This document (prCEN ISO/TR 20172:2005) has been prepared by Technical Committee
CEN/TC 121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 44 "Welding and allied processes".

This document is currently submitted to the parallel Technical Committee for approval.


2

---------------------- Page: 3 ----------------------

TECHNICAL ISO/TR
REPORT 20172
First edition
2005-##-##

Welding — Grouping systems for
materials — European materials
Soudage — Systèmes de groupement des matériaux — Matériaux
européens



PROOF/ÉPREUVE
Reference number
ISO/TR 20172:2005(E)
©
ISO 2005

---------------------- Page: 4 ----------------------

ISO/TR 20172:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii PROOF/ÉPREUVE © ISO 2005 – All rights reserved

---------------------- Page: 5 ----------------------

ISO/TR 20172:2005(E)
Contents Page
Foreword. iv
1 Scope. 1
2 European grouping system for materials. 2
2.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2005, Table 1. 2
2.2 Types of aluminium and aluminium alloy in accordance with the grouping system of
ISO/TR 15608:2005, Table 2 .
...

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 20172:2006
01-maj-2006
9DUMHQMH±5D]YUãþDQMHPDWHULDORYYVNXSLQH±(YURSVNLPDWHULDOL,6275

Welding - Grouping systems for materials - European materials (ISO/TR 20172:2006)
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2006)
Soudage - Systemes de groupement des matériaux - Matériaux européens (ISO/TR
20172:2006)
Ta slovenski standard je istoveten z: CEN ISO/TR 20172:2006
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST-TP CEN ISO/TR 20172:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN ISO/TR 20172:2006

---------------------- Page: 2 ----------------------

SIST-TP CEN ISO/TR 20172:2006
TECHNICAL REPORT
CEN ISO/TR 20172
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
February 2006
ICS 25.160.20

English Version
Welding - Grouping systems for materials - European materials
(ISO/TR 20172:2006)
Soudage - Systèmes de groupement des matériaux - Schweißen - Werkstoffgruppeneinteilung - Europäische
Matériaux européens (ISO/TR 20172:2006) Werkstoffe (ISO/TR 20172:2006)
This Technical Report was approved by CEN on 11 July 2005. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20172:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN ISO/TR 20172:2006

CEN ISO/TR 20172:2006 (E)




Foreword


This document (CEN ISO/TR 20172:2006) has been prepared by Technical Committee
CEN/TC 121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 44 "Welding and allied processes".

2

---------------------- Page: 4 ----------------------

SIST-TP CEN ISO/TR 20172:2006


TECHNICAL ISO/TR
REPORT 20172
First edition
2006-02-01

Welding — Grouping systems for
materials — European materials
Soudage — Systèmes de groupement des matériaux — Matériaux
européens




Reference number
ISO/TR 20172:2006(E)
©
ISO 2006

---------------------- Page: 5 ----------------------

SIST-TP CEN ISO/TR 20172:2006
ISO/TR 20172:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 6 ----------------------

SIST-TP CEN ISO/TR 20172:2006
ISO/TR 20172:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 International grouping system for European materials.
...