CEN/TS 13388:2015
(Main)Copper and copper alloys - Compendium of compositions and products
Copper and copper alloys - Compendium of compositions and products
This Technical Specification provides a summary of material designations, compositions and the product forms in which they are available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 "Copper and copper alloys".
Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte
Diese Technische Spezifikation gibt eine Übersicht über Werkstoffbezeichnungen, Zusammensetzungen und die lieferbaren Produktformen von Kupfer und Kupferlegierungen, die in den Europäischen Normen des CEN/TC 133 „Kupfer und Kupferlegierungen“ genormt sind.
Cuivre et alliages de cuivre - Inventaire des compositions et des produits
La présente Spécification technique fournit un résumé sur les désignations des matériaux, les compositions et les formes de produits disponibles, pour les cuivres et alliages de cuivre normalisés dans les Normes européennes par le CEN/TC 133 « Cuivre et alliages de cuivre ».
Baker in bakrove zlitine - Zbirka kemijskih sestav in izdelkov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2015
1DGRPHãþD
SIST-TS CEN/TS 13388:2014
Baker in bakrove zlitine - Zbirka kemijskih sestav in izdelkov
Copper and copper alloys - Compendium of compositions and products
Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte
Cuivre et alliages de cuivre - Inventaire des compositions et des produits
Ta slovenski standard je istoveten z: CEN/TS 13388:2015
ICS:
77.120.30 Baker in bakrove zlitine Copper and copper alloys
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN/TS 13388
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
May 2015
ICS 77.120.30; 77.150.30 Supersedes CEN/TS 13388:2013
English Version
Copper and copper alloys - Compendium of compositions and
products
Cuivre et alliages de cuivre - Inventaire des compositions et Kupfer und Kupferlegierungen - Übersicht über
des produits Zusammensetzungen und Produkte
This Technical Specification (CEN/TS) was approved by CEN on 21 March 2015 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13388:2015 E
worldwide for CEN national Members.
Contents Page
Foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Compositions of coppers and copper alloys standardised by CEN/TC 133 . 6
3.1 Composition of coppers . 6
3.2 Composition of copper alloys . 6
3.3 Composition of master alloys . 7
3.4 Composition of ingots and castings. 7
3.5 Composition of copper and copper alloy scrap . 7
4 Available product forms of copper and copper alloys . 7
4.1 Wrought coppers and copper alloys . 7
4.2 Master alloys . 7
4.3 Ingots and castings . 7
4.4 Scrap . 7
4.5 Copper and copper alloy grooved contact wires . 7
Bibliography . 51
Tables
Table 1.1 — Composition of copper cathodes according to EN 1978:1998, Cu-CATH-1 (CR001A) and Cu-
CATH-2 (CR002A). 8
Table 1.2 — Composition of unalloyed copper grades made from Cu-CATH-1 (CR001A) according to
EN 1978 . 9
Table 1.3 — Composition of unalloyed copper grades, other than those made from Cu-CATH-1 (CR001A)
according to EN 1978 . 10
Table 1.4 — Composition of phosphorus-containing copper grades . 10
Table 1.5 — Composition of silver-containing copper grades (silver-bearing coppers) . 11
Table 2 — Composition of copper alloys, low alloyed (less than 5 % alloying elements) . 12
Table 3 — Composition of copper-aluminium alloys . 14
Table 4 — Composition of copper-nickel alloys . 14
Table 5 — Composition of copper-nickel-zinc alloys . 15
Table 6 — Composition of copper-tin alloys . 16
Table 7 — Composition of copper-zinc alloys, binary . 17
Table 8 — Composition of copper-zinc-lead alloys . 18
Table 9 — Composition of copper-zinc alloys, complex . 20
Table 10 — Wrought coppers and copper alloys specified in European product Standards prepared by
CEN/TC 133 . 22
Table 11 — Master alloys — Composition . 34
Table 12.1 — Ingots and castings — Copper and copper-chromium alloys — Compositions and casting
processes . 37
Table 12.2 — Ingots and castings — Copper-zinc alloys — Composition and casting processes . 38
Table 12.3 — Ingots and castings — Copper-tin alloys — Composition and casting processes . 41
Table 12.4 — Ingots and castings — Copper-tin-lead alloys — Composition and casting processes ) . 42
Table 12.5 — Ingots and castings — Copper-aluminium alloys — Composition and casting processes . 44
Table 12.6 — Ingots and castings — Copper-manganese-aluminium alloys — Composition and casting
processes . 45
Table 12.7 — Ingots and castings — Copper-nickel alloys — Composition and casting processes . 45
Table 13 — Scrap — Composition . 46
Table 14 — Composition of copper alloy according to EN 50149:2012 . 50
Foreword
This document (CEN/TS 13388:2015) has been prepared by Technical Committee CEN/TC 133 “Copper and
copper alloys”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 13388:2013.
In comparison with CEN/TS 13388:2013, the following changes were made:
a) modifications regarding materials and compositions from EN 12420:2014, EN 13600:2013, EN 13601:2013
and EN 13602:2013 considered;
b) last paragraph of the “Scope” deleted;
c) 3.5 “Composition of filler metals” deleted;
d) 4.4 “Filler metals” deleted;
e) Clause 5 “Copper and copper alloys standardised by other CEN Technical Committees” deleted;
f) Clause 6 “Copper and copper alloys registered by CEN/TC 133” deleted.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Introduction
CEN/TC 133 “Copper and copper alloys” was established in 1988 to prepare and maintain standards in the field of
unwrought, wrought and cast products made from copper and copper alloys. Its responsibilities included
developing, defining, specifying and giving guidance on, as appropriate, material compositions, designations,
terminology, dimensions and tolerances, mechanical and physical characteristics, conditions of delivery and
methods of testing peculiar to copper and copper alloys.
During the development of standards for copper and copper alloy products, the experts realized the necessity and
seized the opportunity:
a) to coordinate and in some cases also to rationalize the composition limits which already existed for the various
product forms;
b) to establish unique, new and identifiably European designations for copper and copper alloys, including a
numerical option to be particularly convenient for computerized handling;
c) to confirm, clarify and redefine where necessary, the terminology which already existed in common usage, at
the international level or in customs nomenclature.
CEN/TC 133 decided, in view of the new form of presentation and new parameters for the description and provision
of information on copper and copper alloy products, to prepare and publish the present consolidation and summary
of essential details.
1 Scope
This Technical Specification provides a summary of material designations, compositions and the product forms in
which they are available, for coppers and copper alloys standardized in European Standards by CEN/TC 133
“Copper and copper alloys”.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for
its application. For dated references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
EN 1976, Copper and copper alloys — Cast unwrought copper products
EN 1982:2008, Copper and copper alloys — Ingots and castings
3 Compositions of coppers and copper alloys standardised by CEN/TC 133
3.1 Composition of coppers
The symbol and number designations and compositions of copper grades are given in the following tables:
— Table 1.1 — Composition of copper cathodes according to EN 1978:1998, Cu-CATH-1 (CR001A) and Cu-
CATH-2 (CR002A)
— Table 1.2 — Composition of unalloyed copper grades made from Cu-CATH-1 (CR001A) according to EN 1978
— Table 1.3 — Composition of unalloyed copper grades, other than those made from Cu-CATH-1 (CR001A)
according to EN 1978
— Table 1.4 — Composition of phosphorus-containing copper grades
— Table 1.5 — Composition of silver-containing copper grades (silver-bearing coppers)
3.2 Composition of copper alloys
The symbol and number designations and compositions of copper alloys are given in the following tables:
— Table 2 — Composition of copper alloys, low alloyed (less than 5 % alloying elements)
— Table 3 — Composition of copper-aluminium alloys
— Table 4 — Composition of copper-nickel alloys
— Table 5 — Composition of copper-nickel-zinc alloys
— Table 6 — Composition of copper-tin alloys
— Table 7 — Composition of copper-zinc alloys, binary
— Table 8 — Composition of copper-zinc-lead alloys
— Table 9 — Composition of copper-zinc alloys, complex
3.3 Composition of master alloys
The symbol and number designations and compositions of master alloys in accor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.