FprEN 1993-1-8
(Main)Eurocode 3 - Design of steel structures - Part 1-8: Joints
Eurocode 3 - Design of steel structures - Part 1-8: Joints
1.1 Scope of FprEN 1993-1-8
(1) FprEN 1993-1-8 provides rules for structural design of joints subject to predominantly static loading using all steel grades from S235 up to and including S700, unless otherwise stated in individual clauses.
NOTE As an alternative to the design rules provided in Clause 9, the design rules given in CEN/TR 1993-1-801 "Eurocode 3: Design of steel structures - Part 1 801: Hollow section joints design according to the component method" can be used.
(2) The provisions in this document apply to steels complying with the requirements given in EN 1993 1 1 and to material thickness greater than or equal to 3 mm, unless otherwise stated in individual clauses.
1.2 Assumptions
(1) Unless specifically stated, EN 1990, EN 1991 (all parts) and the other relevant parts of EN 1993-1 (all parts) apply.
(2) The design methods given in FprEN 1993-1-8 are applicable if:
- the execution quality is as specified in EN 1090-2,
and
- the construction materials and products used are as specified in the relevant parts of EN 1993 (all parts), or in the relevant material and product specifications.
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Anschlüsse
1.1 Anwendungsbereich von FprEN 1993-1-8
(1) FprEN 1993-1-8 enthält Regeln für die Tragwerksplanung von Anschlüssen aus Stahl mit allen Stahlsorten von S235 bis einschließlich S700 unter vorwiegend ruhender Belastung, sofern in einzelnen Abschnitten nicht anders angegeben.
ANMERKUNG Alternativ zu den Bemessungsregeln aus Abschnitt 9 können auch die Bemessungsregeln aus CEN/TR 1993-1- 801 "Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1 801: Bemessung und Konstruktion von Anschlüssen mit Hohlprofilen entsprechend der Komponentenverfahren" verwendet werden.
(2) Die Bestimmungen in diesem Dokument gelten für Stähle, die den Anforderungen aus EN 1993-1-1 entsprechen, und für Materialdicken größer oder gleich 3 mm, sofern in den jeweiligen Abschnitten nicht anders angegeben.
1.2 Annahmen
(1) Sofern nicht ausdrücklich angegeben, gelten FprEN 1990, EN 1991 (alle Teile) und die entsprechenden Teile von EN 1993-1 (alle Teile).
(2) Das Verfahren nach EN 1993-1-8 ist anwendbar, wenn:
- die Qualität der Ausführung den Vorgaben aus EN 1090-2 entspricht,
und
- die verwendeten Baustoffe und -produkte den entsprechenden Teilen der EN 1993 (alle Teile) oder den entsprechenden Material- und Produktspezifikationen entsprechen.
Eurocode 3 - Calcul des structures en acier - Partie 1-8 : Assemblages
1.1 Domaine d'application du FprEN 1993-1-8
(1) Le FprEN 1993-1-8 fourni des règles pour le calcul structural d'assemblages soumis à un chargement essentiellement statique en utilisant toutes les nuances d'acier de S235 jusqu'à S700 inclus, sauf indication contraire dans certains paragraphes.
NOTE En alternative aux règles de calcul prévues à l'article 9, les règles de calcul données dans le document CEN/TR 1993-1-801 "Eurocode 3 : Calcul des structures en acier - Partie 1-801 : Calcul des assemblages de profils creux selon la méthode des composants" peuvent être utilisées.
(2) Les dispositions du présent document s'appliquent aux aciers conformes aux exigences de l'EN 1993-1-1 et aux épaisseurs de matériau supérieures ou égales à 3 mm, sauf indication contraire dans les clauses individuelles.
1.2 Hypothèses
(1) L'EN 1990, l'EN 1991 (toutes les parties) et les autres parties pertinentes de l'EN 1993-1 (toutes les parties) s'appliquent, sauf indications particulières.
(2) Les méthodes de calcul données dans le FprEN 1993-1-8 sont applicables si :
- la qualité de l’exécution est telle que spécifiée dans l'EN 1090 2, et
- les matériaux et produits de construction utilisés sont tels que spécifiés dans les parties correspondantes de l'EN 1993 (toutes les parties) ou dans les spécifications de matériaux et produits appropriées.
Evrokod 3 - Projektiranje jeklenih konstrukcij - 1-8. del: Spoji
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1993-1-8:2021
01-maj-2021
Evrokod 3: Projektiranje jeklenih konstrukcij – 1-8. del: Projektiranje spojev
Eurocode 3: Design of steel structures - Part 1-8: Design of joints
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von
Anschlüssen
Eurocode 3: Calcul des structures en acier - Partie 1-8 : Calcul des assemblages
Ta slovenski standard je istoveten z: prEN 1993-1-8
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.080.13 Jeklene konstrukcije Steel structures
oSIST prEN 1993-1-8:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1993-1-8:2021
---------------------- Page: 2 ----------------------
oSIST prEN 1993-1-8:2021
DRAFT
EUROPEAN STANDARD
prEN 1993-1-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 91.010.30; 91.080.13 Will supersede EN 1993-1-8:2005
English Version
Eurocode 3: Design of steel structures - Part 1-8: Design of
joints
Eurocode 3: Calcul des structures en acier - Partie 1-8 : Eurocode 3: Bemessung und Konstruktion von
Calcul des assemblages Stahlbauten - Teil 1-8: Bemessung von Anschlüssen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 250.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1993-1-8:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1993-1-8:2021
prEN 1993-1-8:2021 (E)
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 10
1.1 Scope of EN 1993-1-8 . 10
1.2 Assumptions . 10
2 Normative references . 10
3 Terms, definitions and symbols . 11
3.1 Terms and definitions . 11
3.2 Symbols and abbreviations . 13
4 Basis of design . 33
4.1 General requirements . 33
4.2 Design assumpti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.