kSIST FprEN 1993-1-8:2023
(Main)Eurocode 3 - Design of steel structures - Part 1-8: Joints
Eurocode 3 - Design of steel structures - Part 1-8: Joints
1.1 Scope of EN 1993 1 8
(1) This document gives design methods for the design of joints subject to predominantly static loading using all steel grades from S235 up to and including S700 unless otherwise stated in individual clauses.
1.2 Assumptions
(1) The assumptions of EN 1990 and EN 1993-1-1 apply to this document.
(2) The design methods given in this part of EN 1993 are applicable when the quality of construction is as specified in EN 1090 2 or EN 1090 4, and that the construction materials and products used are those specified in the relevant parts of EN 1993, or in the relevant material and product specifications.
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Anschlüsse
1.1 Anwendungsbereich von EN 1993 1 8
(1) Dieses Dokument enthält Regeln für den Entwurf, die Berechnung und die Bemessung von Anschlüssen aus Stahl mit allen Stahlsorten von S235 bis einschließlich S700 unter vorwiegend ruhender Belastung, sofern in einzelnen Abschnitten nicht anders angegeben.
1.2 Annahmen
(1) Für dieses Dokument gelten die Annahmen nach EN 1990 und EN 1993 1 1.
(2) Die in diesem Teil von EN 1993 angegebenen Bemessungsverfahren sind anwendbar, wenn die Qualität der Konstruktion den Festlegungen nach EN 1090 2 oder EN 1090 4 entspricht und die verwendeten Baustoffe und Bauprodukte den Festlegungen nach den maßgebenden Teilen von EN 1993 oder den maßgebenden Baustoff- und Bauproduktspezifikationen entsprechen.
Eurocode 3 - Calcul des structures en acier - Partie 1-8 : Assemblages
1.1 Domaine d'application de l'EN 1993-1-8
(1) Le présent document donne des méthodes de calcul d'assemblages soumis à un chargement essentiellement statique en utilisant toutes les nuances d'acier de S235 jusqu'à S700 inclus, sauf indication contraire dans certains paragraphes.
1.2 Hypothèses
(1) Les hypothèses de l'EN 1990 et de l'EN 1993-1-1 s'appliquent au présent document.
(2) Les règles données dans cette partie de l'EN 1993 sont applicables lorsque le niveau de qualité de construction est tel que spécifié dans l'EN 1090 2 ou l'EN 1090 4 et que les matériaux et produits de construction utilisés sont ceux qui sont spécifiés dans les parties correspondantes de l'EN 1993 ou dans les spécifications de matériaux et produits appropriées.
Evrokod 3 - Projektiranje jeklenih konstrukcij - 1-8. del: Spoji
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1993-1-8:2021
01-maj-2021
Evrokod 3: Projektiranje jeklenih konstrukcij – 1-8. del: Projektiranje spojev
Eurocode 3: Design of steel structures - Part 1-8: Design of joints
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von
Anschlüssen
Eurocode 3: Calcul des structures en acier - Partie 1-8 : Calcul des assemblages
Ta slovenski standard je istoveten z: prEN 1993-1-8
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.080.13 Jeklene konstrukcije Steel structures
oSIST prEN 1993-1-8:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1993-1-8:2021
---------------------- Page: 2 ----------------------
oSIST prEN 1993-1-8:2021
DRAFT
EUROPEAN STANDARD
prEN 1993-1-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 91.010.30; 91.080.13 Will supersede EN 1993-1-8:2005
English Version
Eurocode 3: Design of steel structures - Part 1-8: Design of
joints
Eurocode 3: Calcul des structures en acier - Partie 1-8 : Eurocode 3: Bemessung und Konstruktion von
Calcul des assemblages Stahlbauten - Teil 1-8: Bemessung von Anschlüssen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 250.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1993-1-8:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1993-1-8:2021
prEN 1993-1-8:2021 (E)
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 10
1.1 Scope of EN 1993-1-8 . 10
1.2 Assumptions . 10
2 Normative references . 10
3 Terms, definitions and symbols . 11
3.1 Terms and definitions . 11
3.2 Symbols and abbreviations . 13
4 Basis of design . 33
4.1 General requirements . 33
4.2 Design assumpti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.