iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 8502-9:2000

(Main)

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfungen zum Beurteilen der Oberflächenreinheit - Teil 9: Feldverfahren zum Bestimmen von wasserlöslichen Salzen durch Leitfähigkeitsmessung (ISO 8509-9:1998)

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Essais pour apprécier la propreté d'une surface - Partie 9: Méthode in situ pour la détermination des sels solubles dans l'eau par conductimétrie (ISO 8502-9:1998)

La présente partie de l'ISO 8502 décrit une méthode in situ permettant d'évaluer la densité de surface totale des divers sels solubles dans l'eau (principalement chlorures et sulfates) sur les subjectiles d'acier avant ou après la préparation de surface. Les densités de surface individuelles de chlorures, sulfates, etc. ne peuvent pas être déterminées par cette méthode. La méthode évalue seulement les contaminants ioniques. Ceux-ci représentent la majeure partie de la contamination.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusi ocenjevanja čistoče podlage - 9. del: Terenska metoda za določevanje vodotopnih soli z merjenjem prevodnosti (ISO 8502-9:1998)

General Information

Status
Withdrawn
Publication Date
22-Aug-2000
Withdrawal Date
08-Sep-2020
ICS
87.020 - Paint coating processes
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139 - Paints and varnishes
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Sep-2020
Ref Project
SIST EN ISO 8502-9:2001 - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)

Relations

Replaced By
EN ISO 8502-9:2020 - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
Effective Date
07-Jun-2017
Revised
prEN ISO 8502-9 rev - Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO/DIS 8502-9:2015)
Effective Date
19-Jan-2023

Buy Standard

EN ISO 8502-9:2001EN ISO 8502-9:2001
PreviousNext
Standard
EN ISO 8502-9:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2001
3ULSUDYDMHNOHQLKSRGODJSUHGQDQDãDQMHPEDUYQLKLQVRURGQLKSUHPD]RY
3UHVNXVLRFHQMHYDQMDþLVWRþHSRGODJHGHO7HUHQVNDPHWRGD]DGRORþHYDQMH
YRGRWRSQLKVROL]PHUMHQMHPSUHYRGQRVWL ,62
Preparation of steel substrates before application of paints and related products - Tests
for the assessment of surface cleanliness - Part 9: Field method for the conductometric
determination of water-soluble salts (ISO 8502-9:1998)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfungen zum Beurteilen der Oberflächenreinheit - Teil 9: Feldverfahren zum
Bestimmen von wasserlöslichen Salzen durch Leitfähigkeitsmessung (ISO 8509-9:1998)
3UpSDUDWLRQGHVVXEMHFWLOHVG
DFLHUDYDQWDSSOLFDWLRQGHSHLQWXUHVHWGHSURGXLWV
DVVLPLOpV(VVDLVSRXUDSSUpFLHUODSURSUHWpG
XQHVXUIDFH3DUWLH0pWKRGHLQVLWX
SRXUOD
GpWHUPLQDWLRQGHVVHOVVROXEOHVGDQVO
HDXSDUFRQGXFWLPpWULH ,62
Ta slovenski standard je istoveten z: EN ISO 8502-9:2000
ICS:
25.220.10 Priprava površine Surface preparation
87.020 Postopki za nanašanje Paint coating processes
barvnih premazov
2003-01.Slovenski inštitut
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 15741:2021(Main)
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases (ISO 15741:2016)
SIST EN ISO 15741:2021

This document specifies requirements and methods of test for liquid epoxy paints and internal coatings of such paints in steel pipes and fittings for the conveyance of non-corrosive gas. It also deals with the application of the paint. Other paints or paint systems are not excluded provided they comply with the requirements given in this document. The coating consists of one layer, which is normally shop-applied on blast-cleaned steel by airless spray or other suitable spraying techniques. The applied and cured paint film must be smooth to give the desired reduction in friction. Brush application is only used for small repair jobs.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8502-9:2020(Main)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020)
SIST EN ISO 8502-9:2020

This document specifies a field method for the assessment of the surface density of various water-soluble salts on steel surfaces, before and/or after surface preparation, by conductometric determination. The individual surface densities of the salt composition like chlorides, sulphates, sodium, etc, cannot be determined by this method.
This method assesses only contaminants that forms an electrolyte (ions) when in contact with water. These represent the greater part of the contaminants.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12944-5:2019(Main)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)
SIST EN ISO 12944-5:2020

This document describes the types of paint and paint system commonly used for corrosion protection of steel structures.
It also gives guidelines for the selection of paint systems available for different environments (see ISO 12944‑2) except for corrosivity category CX and category Im4 as defined in ISO 12944‑2 and different surface preparation grades (see ISO 12944‑4), and the durability grade to be expected (see ISO 12944‑1).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3681:2018(Main)
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)
SIST EN ISO 3681:2019

This document specifies a titrimetric method for determining the esterified-acid content in binders for paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained.
Because different binders vary in their resistance to saponification, this document is of limited applicability. If necessary, completeness of saponification can be checked by repeating the test under more severe conditions achieved by the use of longer saponification time, more concentrated potassium hydroxide solution, or a higher-boiling alcohol as solvent.
Annex A specifies a procedure suitable for binders that saponify with difficulty.
The method is not applicable to those materials that show further reaction with alkalis beyond normal saponification.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11125-7:2018(Main)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:2018)
SIST EN ISO 11125-7:2018

This document specifies a test method for the determination of the level of free moisture present in metallic blast-cleaning abrasives. It is determined by measuring the mass lost on heating.
This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning.
The types of metallic abrasive and requirements for each are contained in the various parts of ISO 11124.
The ISO 11124 and ISO 11125 series have been drafted as a coherent set of International Standards on metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11125-1:2018(Main)
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018)
SIST EN ISO 11125-1:2018

This document specifies a method for the sampling of metallic blast-cleaning abrasives from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in other parts of ISO 11125.
This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning.
The types of metallic abrasive and requirements for each are contained in the various parts of ISO 11124.
The ISO 11124 and ISO 11125 series have been drafted as a coherent set of International Standards on metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11124-3:2018(Main)
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:2018)
SIST EN ISO 11124-3:2018

This document specifies requirements for 14 grades of high-carbon cast-steel shot and 11 grades of high-carbon cast-steel grit, as supplied for blast-cleaning processes. Values are specified for hardness, density, defect/structural requirements and chemical composition.
The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use.
Test methods for metallic blast-cleaning abrasives are given in the various parts of ISO 11125.
High-carbon cast-steel shot and grit are used in both static and site blasting equipment. They are most often selected where a facility exists for the recovery and re-use of the abrasive.
NOTE 1    Information on commonly referenced national standards for metallic abrasives and their approximate relationship with ISO 11124 is given in Annex A.
NOTE 2    Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504‑2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11126-5:2018(Main)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018)
SIST EN ISO 11126-5:2018

This document specifies requirements for nickel slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use.
Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127.
NOTE       Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504‑2.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11126-4:2018(Main)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)
SIST EN ISO 11126-4:2018

This document specifies requirements for coal furnace slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use.
Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127.
NOTE       Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504‑2.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11126-6:2018(Main)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)
SIST EN ISO 11126-6:2018

This document specifies requirements for iron and steel slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use.
Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127.
NOTE       Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504‑2.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day