EN 4539-003:2010

Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient

This standard specifies the characteristics of bearings, spherical plain in corrosion resisting steel with self lubricating liner, elevated load under low oscillations, with low friction coefficient, wide series, inch series.
They shall be used in the temperature range - 54 °C to 120 °C.

Luft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, hohe Belastung, gering oszillierend - Breite Reihe - Maße und Belastungen - Teil 003: Inch-Reihe mit niedrigen Reibungskoeffizienten

Diese Norm legt die Merkmale von Gelenklagern aus korrosionsbeständigem Stahl mit selbstschmierender
Beschichtung für hohe Belastung, gering oszillierend, mit niedrigem Reibungsbeiwert, breite Reihe, Inch-
Reihe fest.
Diese sind im Temperaturbereich −54 °C bis 120 °C zu verwenden.

Série Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à charge élevée sous faibles oscillations - Série large - Dimensions et charges - Partie 003 : Série en inches avec coefficient bas de friction

Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji - Široki tip - Mere in nosilnosti - 003. del: Colski tip z nizkim koeficientom trenja

Ta standard določa značilnosti kroglastih drsnih ležajev iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji z nizkim koeficientom trenja, široke serije, colskega tipa. Uporabljali se bodo v temperaturnem razponu -54 °C do 120 °C.

General Information

• Status: Published
• Publication Date: 02-Nov-2010
• Withdrawal Date: 30-May-2011
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Nov-2010
• Completion Date: 03-Nov-2010
• Ref Project: SIST EN 4539-003:2011 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji - Široki tip - Mere in nosilnosti - 003. del: Colski tip z nizkim koeficientom trenjaLuft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung Hohe Belastung, gering Oszillierend - Breite Reihe - Maße und Belastungen - Teil 003: Inch Reihe mit niedrigen ReibungskoeffizientenSérie Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à charge élevée sous faibles oscillations - Série large - Dimensions et charges - Partie 003 : Série en inches avec coefficient bas de frictionAerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace constructionICS:Ta slovenski standard je istoveten z:EN 4539-003:2010SIST EN 4539-003:2011en,de01-maj-2011SIST EN 4539-003:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4539-003
November 2010 ICS 49.035 English Version
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient
Série Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à charge élevée sous faibles oscillations - Série large - Dimensions et charges - Partie 003 : Série en inches avec coefficient bas de friction Luft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung Hohe Belastung, gering Oszillierend - Breite Reihe - Maße und Belastungen - Teil 003: Inch Reihe mit niedrigen Reibungskoeffizienten This European Standard was approved by CEN on 7 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4539-003:2010: ESIST EN 4539-003:2011
...