EN 772-16:2000/A2:2005

Methods of test for masonry units - Part 16: Determination of dimensions

Prüfverfahren für Mauersteine - Teil 16: Bestimmung der Maße

Nach "Dicke der Schalen und Stege" ist ", der Stegdickensumme" einzufügen.
Die Worte "und der Tiefe von Löchern" sind zu streichen und durch ", der Tiefe von Löchern und der Planparallelität der Lagerflächen" zu ersetzen.

Méthodes d'essai des éléments de maçonnerie - Partie 16 : Détermination des dimensions

Insérer " et l'épaisseur combinée " après " l'épaisseur ".
Supprimer " ainsi que la profondeur des vides " et remplacer par " , la profondeur des vides et le parallélisme des plans des faces de pose ".

Metode preskušanja zidakov - 16. del: Določevanje mer

General Information

• Status: Withdrawn
• Publication Date: 08-Feb-2005
• Withdrawal Date: 03-May-2011
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: CEN/TC 125 - Masonry
• Drafting Committee: CEN/TC 125 - Masonry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-May-2011
• Completion Date: 04-May-2011
• Ref Project: SIST EN 772-16:2002/A2:2005 - Methods of test for masonry units - Part 16: Determination of dimensions

Relations

• Replaced By: EN 772-16:2011 - Methods of test for masonry units - Part 16: Determination of dimensions
• Effective Date: 07-May-2011
• Amends: EN 772-16:2000 - Methods of test for masonry units - Part 16: Determination of dimensions
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 772-16:2002/A2:2005
01-april-2005
0HWRGHSUHVNXãDQMD]LGDNRYGHO'RORþHYDQMHPHU
Methods of test for masonry units - Part 16: Determination of dimensions
Prüfverfahren für Mauersteine - Teil 16: Bestimmung der Maße
Méthodes d'essai des éléments de maçonnerie - Partie 16 : Détermination des
dimensions
Ta slovenski standard je istoveten z: EN 772-16:2000/A2:2005
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 772-16:2002/A2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 772-16:2002/A2:2005

---------------------- Page: 2 ----------------------

SIST EN 772-16:2002/A2:2005
EUROPEAN STANDARD
EN 772-16:2000/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 91.100.30
English version
Methods of test for masonry units - Part 16: Determination of
dimensions
Méthodes d'essai des éléments de maçonnerie - Partie 16 : Prüfverfahren für Mauersteine - Teil 16: Bestimmung der
Détermination des dimensions Maße
This amendment A2 modifies the European Standard EN 772-16:2000; it was approved by CEN on 29 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 772-16:2000/A2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 772-16:2002/A2:2005
EN 772-16:2000/A2:2005 (E)
Contents
Page
Foreword.3
1 Modification in 1 Scope.4
2 Modification in 2 Normative references .4
3 Modification in 3 Principle .4
4 Modification in 6.1 Sampling .4
5 Modification in 7.1 Length, width and height.4
6 New 7.4 Plane parallelism of the bed faces .4
7 New 7.5 Combined thickness of webs and shells.5
8 Modification in 8 Calculation and expression of results .5
9 Modification in 9 Test report.5
10 New Annex A (informative) .6

2

---------------------- Page: 4 ----------------------

SIST EN 772-16:2002/A2:2005
EN 772-16:2000/A2:2005 (E)
Foreword
This document (EN 772-16:2000/A2:2005) has been prepared by Technical Committee CEN/TC 125
"Masonry", the Secretariat of which is held by BSI.
This Amendment to the European Standard EN 772-16:2000 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by August 2005, and conflicting
national standards shall be withdrawn at the latest by August 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland,
...