CEN/TR 15868:2009

Survey of national requirements used in conjunction with EN 206-1:2000

This CEN Report provides a summary of national requirements used with EN 206-1:2000. The aims of this
CEN Report are to:
a) provide a picture of how EN 206-1 is being applied in practice;
b) identify areas where EN 206-1 is being interpreted in different ways;
c) identify areas where CEN Member Countries have found simplification to be necessary;
d) identify additional national requirements;
e) show areas where CEN Member Countries have found it necessary to override the requirements of
EN 206-1.
EN 206-1 uses the phrase ‘national provisions’. However, recent CEN Guidance wishes to retain this term for
regulatory requirements only. This survey uses the term ‘national requirements’ to include regulations,
standards and other documents that form the basis of local practice.
As a summary of national requirements, the information in this CEN Report is incomplete and may have been
subject to later revisons. It is insufficient and not intended to provide the basis for design and specification: for
this the national requirements (see Table 1.1) should be studied.
Table 1.1 identifies CEN Member Countries who did not respond to the questionnaire. The other tables in this
CEN Report only include information from CEN Member Countries who responded and CEN Member
Countries who did not respond are not identified.

Überblick nationaler Anforderungen, die im Zusammenhang mit EN 206-1:2000 verwendet werden

État des prescriptions nationales utilisées avec l'EN 206-1:2000

Pregled nacionalnih zahtev, ki se uporabljajo skupaj z EN 206-1:2000

General Information

• Status: Withdrawn
• Publication Date: 09-Jun-2009
• Withdrawal Date: 18-Dec-2018
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 1 - Revision of ENV 206
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Dec-2018
• Ref Project: SIST-TP CEN/TR 15868:2009 - Survey of national requirements used in conjunction with EN 206-1:2000

Relations

• Replaced By: CEN/TR 15868:2018 - Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice
• Effective Date: 28-Feb-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15868:2009
01-september-2009
Pregled nacionalnih zahtev, ki se uporabljajo skupaj z EN 206-1:2000
Survey of national requirements used in conjunction with EN 206-1:2000
Überblick nationaler Anforderungen, die im Zusammenhang mit EN 206-1:2000
verwendet werden
État des prescriptions nationales utilisées avec l'EN 206-1:2000
Ta slovenski standard je istoveten z: CEN/TR 15868:2009
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST-TP CEN/TR 15868:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15868:2009

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15868:2009
TECHNICAL REPORT
CEN/TR 15868
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2009
ICS 91.100.30
English Version
Survey of national requirements used in conjunction with EN
206-1:2000
État des prescriptions nationales utilisées avec l'EN 206- Überblick nationaler Anforderungen, die im
1:2000 Zusammenhang mit EN 206-1:2000 verwendet werden
This Technical Report was approved by CEN on 3 February 2009. It has been drawn up by the Technical Committee CEN/TC 104.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15868:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15868:2009
CEN/TR 15868:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Location of national requirements .6
3 Exposure classes.8
4 Constituent materials . 27
5 Limiting values . 35
6 Methods for minimising the risk of damaging ASR . 57
7 Use of additions . 62
8 Intermediate compressive strength classes . 75
9 Conformity and certification . 76
10 National provisions related to additional or different requirements . 84
11 Production control . 96
Annex A National minimum aggregate categories for normal weight aggregate concrete used in
general construction . 99
Annex B Limiting values . 117
Annex C Use of Ground Granulated Blastfurnace Slag . 135


2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 15868:2009
CEN/TR 15868:2009 (E)
Foreword
This document (CEN/TR 15868:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete
and related products”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

3

---------------------- Page: 5 ----------------------

SIST-TP CEN/TR 15868:2009
CEN/TR 15868:2009 (E)
1 Scope
This CEN Report provides a summary of national requir
...