prEN 13260

Railway applications - Wheelsets and bogies - Wheelsets - Product requirements

This document specifies the characteristics of wheelsets for all heavy rail track gauges.
This document applies to heavy rail vehicles and applies, in principle, to other vehicles such as urban rail vehicles.
This document applies to wheelsets made from elements defined by the following European standards:
-   EN 13262:2020 for wheels;
-   EN 13261:2020 for axles.
The requirements defined in this document apply to cylindrical wheel seats. Most of the requirements also apply to wheelsets with conical wheel seats. If needed, specific requirements for conical wheel seats (e.g. press-fitting curves, geometric dimensions...) are defined in the technical specification.
Some characteristics are given according to category 1 or category 2.

Bahnanwendungen - Radsätze und Drehgestelle - Radsätze - Produktanforderungen

Dieses Dokument legt die Eigenschaften von Radsätzen für alle Vollbahnspurweiten fest.
Dieses Dokument ist für Vollbahnfahrzeuge und grundsätzlich für andere Fahrzeuge wie z. B. Stadtbahnfahrzeuge anwendbar.
Dieses Dokument ist für Radsätze anwendbar, die aus den durch die folgenden Europäischen Normen festgelegten Teilen bestehen:
-   EN 13262:2020 für Räder;
-   EN 13261:2020 für Radsatzwellen.
Die in diesem Dokument festgelegten Anforderungen sind für zylindrische Radsitze anwendbar. Die meisten Anforderungen sind ebenfalls für Radsätze mit konischen Radsitzen anwendbar. Falls erforderlich, werden die spezifischen Anforderungen an konische Radsitze (z. B. Aufpresskurven, geometrische Abmessungen, etc.) in der technischen Spezifikation festgelegt.
Einige Eigenschaften sind entsprechend der Kategorie 1 oder Kategorie 2 angegeben.

Applications ferroviaires - Essieux montés et bogies - Essieux montés - Prescriptions pour le produit

Le présent document spécifie les caractéristiques des essieux montés pour tous les écartements de rails lourds.
Ce document concerne les véhicules ferroviaires lourds et s'applique, en principe, à d'autres véhicules tels que les véhicules ferroviaires urbains.
Le présent document s'applique aux essieux montés composés d'éléments définis par les normes européennes suivantes :
—   EN 13262:2020 pour les roues ;
—   EN 13261:2020 pour les essieux-axes.
Les exigences définies dans le présent document s'appliquent aux portées de calage cylindriques. La plupart des prescriptions s'appliquent également aux essieux montés à portées de calage conique. Si nécessaire, des exigences spécifiques pour les portées de calage coniques (par ex. courbes de calage à la presse, dimensions géométriques des portées...) sont définies dans la spécification technique.
Quelques caractéristiques sont données en fonction d'une catégorie 1 ou d'une catégorie 2.

Železniške naprave - Kolesne dvojice in podstavni vozički - Kolesne dvojice - Zahtevane lastnosti proizvoda

General Information

• Status: Not Published
• Publication Date: 11-May-2025
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 2/WG 11 - Wheels - Wheelsets
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 04-May-2023
• Due Date: 14-Sep-2022
• Completion Date: 04-May-2023
• Directive: 2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Mandate: M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
• Ref Project: oSIST prEN 13260:2023 - Railway applications - Wheelsets and bogies - Wheelsets - Product requirements

Relations

• Revises: EN 13260:2020 - Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13260:2023
01-april-2023
Nadomešča:
SIST EN 13260:2020
Železniške naprave - Kolesne dvojice in podstavni vozički - Kolesne dvojice -
Zahtevane lastnosti proizvoda
Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
Bahnanwendungen - Radsätze und Drehgestelle - Radsätze - Produktanforderungen
Applications ferroviaires - Essieux montés et bogies - Essieux montés - Prescriptions
pour le produit
Ta slovenski standard je istoveten z: prEN 13260
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 13260:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13260:2023

---------------------- Page: 2 ----------------------
oSIST prEN 13260:2023


DRAFT
EUROPEAN STANDARD
prEN 13260
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2023
ICS 45.040 Will supersede EN 13260:2020
English Version

Railway applications - Wheelsets and bogies - Wheelsets -
Product requirements
Applications ferroviaires - Essieux montés et bogies - Bahnanwendungen - Radsätze und Drehgestelle -
Essieux montés - Prescriptions pour le produit Radsätze - Produktanforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13260:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13260:2023
prEN 13260:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Product definition . 7
4.1 Assembly of components . 7
4.1.1 General . 7
4.1.2 Interference between wheel seat and wheel hub bore . 7
4.1.3 Press-fitting diagram . 8
4.2 Wheelset characteristics . 8
4.2.1 Mechanical resistance of assemblies .
...