EN 1313-1:2010
(Main)Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
This European Standard specifies permitted deviations for thickness and width at reference moisture content and adjustments for changes in size due to changes in moisture content. Preferred sizes for thicknesses of 38 mm and over are also specified.
This standard applies to softwood sawn timber.
An informative annex gives complementary national sizes.
NOTE A.5 includes for France the concept of preferred size for green timber.
Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmaße - Teil 1: Nadelschnittholz
Diese Europäische Norm legt zulässige Abweichungen für Dicken und Breiten bei einem Bezugsfeuchtegehalt und Anpassungen für Maßänderungen aufgrund von Änderungen im Feuchtegehalt fest. Vorzugsmaße für Dicken ab 38 mm sind ebenfalls aufgeführt.
Diese Norm gilt für Nadelschnittholz.
Ein informativer Anhang gibt zusätzliche nationale Maße an.
ANMERKUNG A.5 enthält für Frankreich das Vorzugsmaß-Konzept für frisches Holz.
Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1 : Bois sciés résineux
La présente norme prescrit les écarts admissibles par rapport aux épaisseurs et aux largeurs à une humidité de référence ainsi que les adaptations aux variations dimensionnelles dues à des variations d’humidité. Les dimensions préférentielles sont précisées pour une épaisseur également ou supérieure à 38 mm.
La présente norme s’applique aux bois sciés résineux.
Une annexe informative fournit des dimensions nationales complémentaires.
NOTE Le concept de dimension préférentielle pour du bois vert est introduit en A.5 pour la France.
Okrogli in žagani les - Dovoljena odstopanja in prednostne mere - 1. del: Žagani les iglavcev
Ta evropski standard določa dovoljena odstopanja za debelino in širino pri referenčni vsebnosti vlage in prilagoditve za spremembe v velikosti zaradi sprememb v vsebnosti vlage. Določene so tudi prednostne velikosti za debelino 38 mm in več. Ta standard se uporablja za žagani les iglavcev. Informativni dodatek podaja komplementarne nacionalne velikosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Okrogli in žagani les - Dovoljena odstopanja in prednostne mere - 1. del: Žagani les iglavcevRund- und Schnittholz - Zulässige Abweichungen und Vorzugsmasse - Teil 1: NadelschnittholzBois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1: Bois sciés résineuxRound and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 1313-1:2010SIST EN 1313-1:2010en,fr,de01-april-2010SIST EN 1313-1:2010SLOVENSKI
STANDARDSIST EN 1313-1:2003/A1:2003SIST EN 1313-1:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1313-1
January 2010 ICS 79.040 Supersedes EN 1313-1:1997English Version
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber
Bois ronds et bois sciés - Ecarts admissibles et dimensions préférentielles - Partie 1 : Bois sciés résineux
Rund- und Schnittholz - Zulässige Abweichungen und Vorzugsmaße - Teil 1: Nadelschnittholz This European Standard was approved by CEN on 18 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1313-1:2010: ESIST EN 1313-1:2010
Complementary national sizes .6A.1 Complementary preferred sizes in Austria (AT) .6A.2 Complementary preferred sizes in Switzerland (CH) .6A.3 Complementary preferred sizes in Germany (DE) .7A.4 Complementary preferred sizes in Finland (FI) .7A.5 Complementary preferred sizes in France (Fr) .8A.6 Complementary preferred sizes in United Kingdom (GB) .9A.7 Complementary preferred sizes in Ireland (IR) .9A.8 Complementary preferred sizes in Italy (IT) . 10A.9 Complementary preferred sizes in the Netherlands (NL) . 10A.10 Complementary preferred sizes in Norway (NO) . 11A.11 Complementary preferred sizes in Sweden (SE) . 11A.12 Complementary preferred sizes in Poland (PL) . 12 SIST EN 1313-1:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.