EN ISO 8031:2020

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)

This document specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive, antistatic and non-conductive hoses and the electrical continuity or discontinuity between metal end fittings.
All the test methods described for rubber hoses in this document can also be applied to plastics hoses.

Gummi- und Kunststoffschläuche und Schlauchleitungen - Bestimmung des elektrischen Widerstands und der elektrischen Leitfähigkeit (ISO 8031:2020)

In diesem Dokument werden Verfahren zur elektrischen Prüfung von Gummi  und Kunststoffschläuchen mit und ohne Einlagen und von Schlauchleitungen festgelegt, um den Widerstand von leitfähigen, antistatischen und nicht leitfähigen Schläuchen und den elektrischen Durchgang oder die elektrische Unterbrechung zwischen Metall Endarmaturen zu bestimmen.
Alle in diesem Dokument für Gummischläuche beschriebenen Prüfverfahren können auch auf Kunststoffschläuche angewendet werden.

Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la résistance et de la conductivité électriques (ISO 8031:2020)

Le présent document spécifie des méthodes d'essais électriques des tuyaux, tubes et flexibles en caoutchouc et en plastique pour déterminer la résistance des tuyaux conducteurs, antistatiques et non conducteurs et la continuité ou la discontinuité électrique entre extrémités de raccordement métalliques.
Toutes les méthodes d'essai pour les tuyaux en caoutchouc détaillées dans le présent document peuvent être également appliquées aux tuyaux en plastique.

Gumene in polimerne cevi ter cevni priključki - Ugotavljanje električne upornosti in prevodnosti (ISO 8031:2020)

General Information

• Status: Published
• Publication Date: 14-Jul-2020
• Withdrawal Date: 30-Jan-2021
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jul-2020
• Completion Date: 15-Jul-2020
• Ref Project: SIST EN ISO 8031:2020 - Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)

Relations

• Replaces: EN ISO 8031:2009 - Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
• Effective Date: 29-Jan-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8031:2020
01-oktober-2020
Nadomešča:
SIST EN ISO 8031:2010
Gumene in polimerne cevi ter cevni priključki - Ugotavljanje električne upornosti in
prevodnosti (ISO 8031:2020)
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance
and conductivity (ISO 8031:2020)
Gummi- und Kunststoffschläuche und Schlauchleitungen - Bestimmung des elektrischen
Widerstands und der elektrischen Leitfähigkeit (ISO 8031:2020)
Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la résistance et de
la conductivité électriques (ISO 8031:2020)
Ta slovenski standard je istoveten z: EN ISO 8031:2020
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
83.140.40 Gumene cevi Hoses
SIST EN ISO 8031:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 8031:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 8031:2020


EN ISO 8031
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2020
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 8031:2009
English Version

Rubber and plastics hoses and hose assemblies -
Determination of electrical resistance and conductivity
(ISO 8031:2020)
Tuyaux et flexibles en caoutchouc et en plastique - Gummi- und Kunststoffschläuche und
Détermination de la résistance et de la conductivité Schlauchleitungen - Bestimmung des elektrischen
électriques (ISO 8031:2020) Widerstands und der elektrischen Leitfähigkeit (ISO
8031:2020)
This European Standard was approved by CEN on 12 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8031:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 8031:2020
EN ISO 8031:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 8031:2020
EN ISO 8031:2020 (E)
European foreword
This document (EN ISO 8031:2020) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8031:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8031:2020 has been approved by CEN as EN ISO 8031:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 8031:2020

-------------------
...