EN ISO 3815-2:2005

Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005)

ISO 3815-2:2005 specifies analytical methods for determining the chemical composition of zinc and zinc alloys in accordance with ISO 301 and ISO 752 by inductively coupled optical emission spectrometry.
ISO 3815-2:2005 includes provisions for preparation of test solutions and calibration solutions for zinc and zinc alloys.
The ranges specified for each method can be extended and/or adapted for determinations of low concentrations.
ISO 3815-2:2005 can be applied to other elements (e.g. Ni, Cr and Ti). However, such results will need to be carefully checked by taking into account the interferences, the sensivity, the resolution and the linearity criteria for each instrument and each wavelength.

Zink und Zinklegierungen - Teil 2: Optische Emissionsspektrometrie mit induktiv gekoppelter Plasmaanregung (ISO 3815-2:2005)

Dieser Teil von ISO 3815 legt Analysenverfahren mittels optischer Emissionsspektralanalyse mit induktiv gekoppelter Plasmaanregung zur Bestimmung der chemischen Zusammensetzung von Zink und Zinklegierungen fest, die in ISO 301 und ISO 752 beschrieben werden.
Dieser Teil von ISO 3815 enthält Vorschriften zur Präparation von Prüf- und Kalibrierlösungen von Zink und Zinklegierungen.
Die angegebenen Konzentrationsbereiche für die Bestimmung von niedrigeren Konzentrationen können für jedes Verfahren erweitert und/oder angepasst werden.
Dieser Teil von ISO 3815 kann auch auf andere Elemente (z. B. Ni, Cr und Ti) angewendet werden. Jedoch sollten solche Ergebnisse sorgfältig geprüft werden unter Berücksichtigung von Interferenzen, Empfindlichkeit, Auflösung und der Linearitätskriterien für jedes Gerät und jede Wellenlänge.

Zinc et alliages de zinc - Partie 2: Analyse par spectrométrie d'émission optique avec source à plasma à couplage inductif (ISO 3815-2:2005)

L'ISO 3815-2:2005 spécifie des méthodes analytiques pour analyser la composition chimique du zinc et des alliages de zinc en conformité avec l'ISO 301 et l'ISO 752 par spectrométrie d'émission optique par plasma à couplage inductif.
L'ISO 3815-2:2005 inclut des dispositions pour la préparation des solutions d'essai et des solutions d'étalonnage pour le zinc et les alliages de zinc.
Les domaines spécifiés pour chaque méthode peuvent être étendus et/ou adaptés pour la détermination de faibles concentrations.
L'ISO 3815-2:2005 peut s'appliquer à d'autres éléments (comme Ni, Cr et Ti). Néanmoins, de tels résultats doivent être contrôlés soigneusement en tenant compte des interférences, de la sensibilité, de la résolution et des critères de linéarité pour chaque instrument et pour chaque longueur d'onde.

Cink in cinkove zlitine – 2. del: Analiza z optično emisijsko spektometrijo z induktivno sklopljeno plazmo (ISO 3815-2:2005)

General Information

• Status: Published
• Publication Date: 14-Jul-2005
• Withdrawal Date: 30-Jan-2006
• ICS: 77.120.60 - Lead, zinc, tin and their alloys
• Technical Committee: CEN/TC 209 - Zinc and zinc alloys
• Drafting Committee: CEN/TC 209/WG 6 - Methods of analysis and testing
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jul-2005
• Completion Date: 15-Jul-2005
• Ref Project: SIST EN ISO 3815-2:2005 - Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005)

Relations

• Replaces: EN 12019:1997 - Zinc and zinc alloys - Optical emission spectrometric analysis
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2005
&LQNLQFLQNRYH]OLWLQH±GHO$QDOL]D]RSWLþQRHPLVLMVNRVSHNWRPHWULMR]
LQGXNWLYQRVNORSOMHQRSOD]PR,62
Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission
spectrometry (ISO 3815-2:2005)
Zink und Zinklegierungen - Teil 2: Optische Emissionsspektrometrie mit induktiv
gekoppelter Plasmaanregung (ISO 3815-2:2005)
Zinc et alliages de zinc - Partie 2: Analyse par spectrométrie d'émission optique avec
source a plasma a couplage inductif (ISO 3815-2:2005)
Ta slovenski standard je istoveten z: EN ISO 3815-2:2005
ICS:
77.120.60 Svinec, cink, kositer in Lead, zinc, tin and their
njihove zlitine alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 3815-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 77.120.60; 77.040.30 Supersedes EN 12019:1997
English Version
Zinc and zinc alloys - Part 2: Analysis by inductively coupled
plasma optical emission spectrometry (ISO 3815-2:2005)
Zinc et alliages de zinc - Partie 2: Analyse par Zink und Zinklegierungen - Teil 2: Optische
spectrométrie d'émission optique avec source à plasma à Emissionsspektrometrie mit induktiv gekoppelter
couplage inductif (ISO 3815-2:2005) Plasmaanregung (ISO 3815-2:2005)
This European Standard was approved by CEN on 12 May 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3815-2:2005: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 3815-2:2005) has been prepared by Technical Committee ISO/TC 18
"Zinc and zinc alloys" in collaboration with Technical Committee CEN/TC 209 "Zinc and zinc
alloys", the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2006, and conflicting national
standards shall be withdrawn at the latest by January 2006.

This document supersedes EN 12019:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 3815-2:2005 has been approved by CEN as EN ISO 3815-2:2005 without any
modifications.
INTERNATIONAL ISO
STANDARD 3815-2
First edition
2005-07-15
Zinc and zinc alloys —
Part 2:
Analysis by inductively coupled plasma
optical emission spectrometry
Zinc et alliages de zinc —
Partie 2: Analyse par spectrométrie d'émission optique avec source
à plasma à couplage inductif
Reference number
ISO 3815-2:2005(E)
©
ISO 2005
ISO 3815-2:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

ISO 3815-2:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3815-2 was prepared by Technical Committee ISO/TC 18, Zinc and zinc alloys, Subcommittee SC 1,
Methods of sampling and analysis of zinc and zinc alloys.
This first edition of ISO 3815-2 cancels and replaces ISO 3815:1976, which has been technically revised.
ISO 3815 consists of the following parts, under the general title Zinc and zinc alloys:
 Part 1: Analysis of solid samples by optical emission spectrometry
 Part 2: Analysis by inductively coupled plasma optical emission spectrometry
INTERNATIONAL STANDARD ISO 3815-2:2005(E)

Zinc and zinc alloys —
Part 2:
Analysis by inductively coupled plasma optical emission
spectrometry
1 Scope
This part of ISO 3815 specifies analytical methods for determining the chemical composition of zinc and zinc
alloys in accordance with ISO 301 and ISO 752 by inductively coupled plasma optical emission spectrometry.
This part of ISO 3815 includes provisions for preparation of test solutions and calibration solutions for zinc and
zinc alloys.
The ranges specified for each method can be extended and/or adapted for determinations of low
concentrations.
This part of ISO 3815 can be applied to other elements (e.g. Ni, Cr and Ti). However, such results will need to
be carefully checked by taking into account the interferences, the sensitivity, the resolution and the linearity
criteria for each instrument and each wavelength.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 301, Zinc alloy ingots intended for casting
ISO 752, Zinc ingots
ISO 1169, Zinc alloys — Determination of aluminium content — Volumetric method
1)
ISO 20081:— , Zinc and zinc alloys — Method of sampling — Specifications
EN 988, Zinc and zinc alloys — Specifications for rolled flat products for building
EN 12844, Zinc and zinc alloys — Castings — Specif
...