EN ISO 10225:2021
(Main)Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013)
Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013)
ISO 10225:2013 specifies the gas letter code to be used for marking the equipment for gas welding, cutting and allied processes, when the full name of the gas cannot be used.
Gasschweißgeräte - Kennzeichnung von Geräten für das Gasschweißen, Schneiden und verwandte Prozesse (ISO 10225:2013)
Matériel de soudage aux gaz - Marquage des matériels de soudage aux gaz, de coupage et pour techniques connexes (ISO 10225:2013)
L'ISO 10225:2013 spécifie le code lettre des gaz à utiliser pour le marquage des équipements de soudage au gaz, de coupage et pour techniques connexes, lorsque le nom complet du gaz ne peut être utilisé.
Oprema za plamensko varjenje - Označevanje opreme za plamensko varjenje, rezanje in sorodne postopke (ISO 10225:2013)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10225:2021
01-maj-2021
Oprema za plamensko varjenje - Označevanje opreme za plamensko varjenje,
rezanje in sorodne postopke (ISO 10225:2013)
Gas welding equipment - Marking for equipment used for gas welding, cutting and allied
processes (ISO 10225:2013)
Gasschweißgeräte - Kennzeichnung von Geräten für das Gasschweißen, Schneiden und
verwandte Prozesse (ISO 10225:2013)
Matériel de soudage aux gaz - Marquage des matériels de soudage aux gaz, de
coupage et pour techniques connexes (ISO 10225:2013)
Ta slovenski standard je istoveten z: EN ISO 10225:2021
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 10225:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10225:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 10225:2021
EN ISO 10225
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2021
EUROPÄISCHE NORM
ICS 25.160.30
English Version
Gas welding equipment - Marking for equipment used for
gas welding, cutting and allied processes (ISO
10225:2013)
Matériel de soudage aux gaz - Marquage des matériels Gasschweißgeräte - Kennzeichnung von Geräten für
de soudage aux gaz, de coupage et pour techniques das Gasschweißen, Schneiden und verwandte Prozesse
connexes (ISO 10225:2013) (ISO 10225:2013)
This European Standard was approved by CEN on 15 February 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10225:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10225:2021
EN ISO 10225:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10225:2021
EN ISO 10225:2021 (E)
European foreword
The text of ISO 10225:2013 has been prepared by Technical Committee ISO/TC 44 "Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 10225:2021 by Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2021, and conflicting national standards
shall be withdrawn at the latest by September 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10225:2013 has been approved by CEN as EN ISO 10225:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10225:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 10225:2021
INTERNATIONAL ISO
STANDARD 10225
First edition
2013-11-15
Gas welding equipment
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.