Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method

This European Standard defines the method for determining the moisture content of a piece of sawn timber.
This method is considered as the reference method.
This standard applies to sawn timber, and timber which has been planed or surfaced by other means.

Feuchtegehalt eines Stückes Schnittholz - Teil 1: Bestimmung durch Darrverfahren

Diese Europäische Norm legt das Verfahren zur Bestimmung des Feuchtegehaltes eines Stückes Schnittholz fest.
Dieses Verfahren gilt als Referenzverfahren.
Diese Norm gilt für Schnittholz und Holz, welches gehobelt oder anderweitig mechanisch oberflächenbearbeitet wurde.

Teneur en humidité d'une pièce de bois scié - Partie 1: Détermination par la méthode par dessiccation

La présente norme Européenne définit la méthode de détermination de la teneur en humidité d'une pièce de bois. Cette méthode doit être considérée comme une méthode de référence. Cette norme s'applique aux bois sciés et aux bois qui ont été rabotés ou surfacés par d'autres moyens.

Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method

General Information

Status
Published
Publication Date
16-Apr-2002
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
21-Jun-2007

RELATIONS

Buy Standard

Standard
EN 13183-1:2003
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13183-1:2003
01-oktober-2003
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry
method

Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method

Feuchtegehalt eines Stückes Schnittholz - Teil 1: Bestimmung durch Darrverfahren

Teneur en humidité d'une piece de bois scié - Partie 1: Détermination par la méthode par

dessiccation
Ta slovenski standard je istoveten z: EN 13183-1:2002
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
SIST EN 13183-1:2003 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13183-1:2003
---------------------- Page: 2 ----------------------
SIST EN 13183-1:2003
EUROPEAN STANDARD
EN 13183-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2002
ICS 79.040
English version
Moisture content of a piece of sawn timber - Part 1:
Determination by oven dry method

Teneur en humidité d'une pièce de bois scié - Partie 1: Feuchtegehalt eines Stückes Schnittholz - Teil 1:

Détermination par la méthode par dessiccation Bestimmung durch Darrverfahren
This European Standard was approved by CEN on 29 December 2001.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,

Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13183-1:2002 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13183-1:2003
EN 13183-1:2002 (E)
Contents
page
FOREWORD 3
1SCOPE 3
2 NORMATIVE REFERENCES 3
3 TERMS AND DEFINITIONS 4
4 APPARATUS 4
5 PROCEDURE 4
6 CALCULATION AND EXPRESSION OF THE RESULTS 5
---------------------- Page: 4 ----------------------
SIST EN 13183-1:2003
EN 13183-1:2002 (E)
Foreword
This document EN 13183-1:2002 has been prepared by CEN/TC175 "Round and sawn
timber”, the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication

of an identical text or by endorsement, at the latest by October 2002, and conflicting national

standards shall be withdrawn at the latest by October 2002.

This standard is one of a series, dealing with methods of measurement for round timber and

sawn timber.
Other standards in this series are:
EN 13183-2 : Moisture content of a piece of sawn timber - Part 2: Estimation by
electrical resistance method.
EN 1309-1 : Round and sawn timber - Method of measurement of dimensions -
Part 1: Sawn timber.
EN 1310 : Round and sawn timber - Method of measurement of features.
EN 1311 : Round and sawn timber - Method of measurement of biological
degrade.

According to the CEN/CENELEC Internal Regulations, the national standards organizations

of the following countries are bound to implement this European Standard: Austria, Belgium,

Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,

Luxembourg, Malta, Netherlands, Norway, Portugal, Spa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.