EN 1402-6:2003
(Main)Unshaped refractory products - Part 6: Measurement of physical properties
Unshaped refractory products - Part 6: Measurement of physical properties
This standard specifies methods for the determination of properties of unshaped materials from test pieces prepared and stored according to prENV 1402-5. The methods are applicable to dense and insulating castables and to mouldable materials (plastics and ramming mixes) as defined in ENV 1402-1 before and after firing.
Ungeformte feuerfeste Erzeugnisse - Teil 6: Bestimmung der physikalischen Eigenschaften
Dieser Teil dieser Europäischen Norm legt Verfahren zur Bestimmung der Eigenschaften ungeformter feuerfester Werkstoffe an Probekörpern, die nach prEN 1402-5 hergestellt und gelagert wurden, fest.
Die Verfahren sind anwendbar für dichte und wärmedämmende Feuerbetone und Rammassen (einschließlich plastische Massen), wie in prEN 1402-1 definiert, im ungebrannten und gebrannten Zustand.
Produits réfractaires non-façonnés - Partie 6: Détermination des propriétés physiques
La présente partie de cette Norme européenne spécifie des méthodes pour la détermination des propriétés de matériaux non façonnés à partir d'éprouvettes préparées et conservées conformément au prEN 1402-5.
Les méthodes sont applicables aux bétons denses et isolants et aux matériaux moulables (y compris les plastiques) tels que définis dans le prEN 1402-1, avant et après cuisson.
Neoblikovani ognjevzdržni izdelki - 6. del: Merjenje fizikalnih lastnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neoblikovani ognjevzdržni izdelki - 6. del: Merjenje fizikalnih lastnostiUngeformte feuerfeste Erzeugnisse - Teil 6: Bestimmung der physikalischen EigenschaftenProduits réfractaires non-façonnés - Partie 6: Détermination des propriétés physiquesUnshaped refractory products - Part 6: Measurement of physical properties81.080Ognjevzdržni materialiRefractoriesICS:Ta slovenski standard je istoveten z:EN 1402-6:2003SIST EN 1402-6:2004en01-maj-2004SIST EN 1402-6:2004SLOVENSKI
STANDARDSIST ENV 1402-6:19981DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1402-6October 2003ICS 81.080Supersedes ENV 1402-6:1998English versionUnshaped refractory products - Part 6: Measurement of physicalpropertiesProduits réfractaires non-façonnés - Partie 6:Détermination des propriétés physiquesUngeformte feuerfeste Erzeugnisse - Teil 6: Bestimmungder physikalischen EigenschaftenThis European Standard was approved by CEN on 20 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1402-6:2003 ESIST EN 1402-6:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.