iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1129-2:1995

(Main)

Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods

Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods

This part of the prEN 1129-2 specifies test methods that assess the safety of foldaway beds (hereafter referred as "beds")for domestic use. Folding beds, camping beds, convertible bed/chairs or settees are not covered by this standard. The tests are designed to be applied to a foldaway bed that is fully assembled and ready for use. The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model.

Möbel - Klappbetten - Sicherheitstechnische Anforderungen und Prüfverfahren - Teil 2: Prüfverfahren

PrEN 1129-2 legt Prüfverfahren zur Beurteilung der Sicherheit von Klappbetten (im folgenden kurz Betten) im hauslichen Gebrauch fest. Faltbetten, Campingliegen, Schlafcouchen oder in Betten unwandelbare Sessel oder Sofas werden in dieser Norm nicht behandelt. Die Prüfungen sind an einem vollstandig montierten und gebrauchsfertien Klappbett durchzuführen. Die Prüfergebnisse gelten nur für den gepruften Gegenstand. Falls die Prüfergebnisse auf andere gleichartige Gegenstande angewendet werden sollen, dann sollte das Prüfmuster reprasentativ für das Produktionsmodell sein.

Ameublement - Lits rabattables - Exigences de sécurité et essais - Partie 2: Méthodes d'essai

La présente partie du prEN 1129-2 spécifie des méthodes d'essai qui assurent la sécurité des lits rabattables (appelés dans la suite du texte "lits") à usage domestique. La présente norme ne s'applique pas aux lits pliants, aux lits de camp, aux lits/fauteuils convertibles ou canapés. Les essais doivent être appliqués sur un lit rabattable complètement assemblé et prêt à l'emploi. Les résultats d'essai ne sont valables que pour l'article essayé. Lorsque les résultats d'essais sont destinés à être appliqués à d'autres articles similaires, l'échant. essayé devrait être représentatif du modèle en production

Pohištvo - Sklopne postelje - Varnostne zahteve in preskušanje - 2. del: Preskusne metode

General Information

Status
Published
Publication Date
09-Feb-1995
Withdrawal Date
30-Aug-1995
ICS
97.140 - Furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207/WG 9 - Test methods
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
04-Jun-2020
Directive
2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
Ref Project
SIST EN 1129-2:1996 - Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods

Buy Standard

EN 1129-2:1996EN 1129-2:1996
PreviousNext
Standard
EN 1129-2:1996
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1129-2:1996
01-april-1996
Pohištvo - Sklopne postelje - Varnostne zahteve in preskušanje - 2. del: Preskusne
metode
Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods
Möbel - Klappbetten - Sicherheitstechnische Anforderungen und Prüfverfahren - Teil 2:
Prüfverfahren
Ameubleme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15186:2024(Main)
Furniture - Assessment of the surface resistance to scratching
kSIST FprEN 15186:2023

This document specifies a method for the assessment of the surface resistance to different kinds of visible scratches. It relates to the rigid surfaces of all finished products, regardless of their material.
It does not apply to finishes on leather and fabrics.
Method A is suitable for all types of surface coatings and coverings except for melamine faced boards (according to EN 14322) and HPL (according to EN 438 1). It simulates measurable penetrating and/or deforming scratches.
Method B is suitable for all types of surfaces. It simulates first visible traces (e.g. scratches, marks) that can also be a change in the gloss.
The test is intended to be carried out on a part of finished furniture. It can, however, be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
kSIST FprEN 747-2:2023

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
kSIST FprEN 747-1:2023

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16121:2023(Main)
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
SIST EN 16121:2024

This document specifies requirements for the safety, strength, and durability for all types of non-domestic storage furniture.
It does not apply to domestic storage, industrial storage, kitchen, catering equipment, retail storage, and industrial storage lockers.
Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included.
The standard contains five annexes
Annex A (normative) Test methods for finger entrapment;
Annex B (normative) Requirements for schools, kindergartens and similar applications
Annex C (normative) Selecting product from a range of furniture
Annex D (informative) Guidance of test severity in relation to application
Annex E (informative) Suggested loads for tests not specified in this standard
It does not include requirements for the resistance to ageing, degradation and flammability.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
SIST EN 15185:2024

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17850:2023(Main)
Hardware for furniture - Star bases for seating - Requirements and test methods
SIST EN 17850:2024

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15372:2023(Main)
Furniture - Strength, durability and safety - Requirements for non-domestic tables
SIST EN 15372:2024

This document specifies requirements for the safety, strength and durability of all types of non-domestic tables including those with glass in their construction.
It does not apply to office work tables or desks, tables for educational institutions, laboratory workbenches for educational institutions and outdoor tables for which EN standards exist.
It does not apply to laboratory workbenches for professional use and industrial workbenches.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 6, Table 2, the top becomes detached from the understructure.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in non-domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
This document has three annexes:
-   Annex A (normative) Test methods for finger entrapment;
-   Annex B (informative) Additional test requirements;
-   Annex C (informative) Test severity in relation to application.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17902:2023(Main)
Furniture - Circularity - Evaluation method for dis/re-assembly capability
SIST EN 17902:2024

This document provides guidelines for one aspect of circular economy framework; disassembly and reassembly capability.
This document establishes a set of criteria on which to base an assessment of the ability to access and remove/replace/reassemble priority parts of products. The criteria provided are intended to be used when designing a product and are applicable to different designs, materials, or construction methods.
This document does not include requirements.
The document does not apply to disassembly operation for the sole purpose of separating the individual materials.
This document does not provide a method to evaluate the overall degree of circularity of furniture products. For this, additional complementary evaluation methods for other aspects are necessary.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1725:2023(Main)
Furniture - Beds - Requirements for safety, strength and durability
SIST EN 1725:2024

This document specifies requirements on safety, strength and durability for all types of fully assembled beds used by adults in domestic and non-domestic environments including their components, such as bed frames, bed bases, mattresses and mattress pads (when they form a unit with the mattress) and, when supplied with the bed base, mattresses and mattress pads.
The tests are based on use by persons weighing up to 110 kg.
With the exception of sleeping functions, it does not apply to foldaway beds.
It does not apply to bunk beds, high beds and medical beds where separate Standards exist, as well as waterbeds and air beds.
Additional requirements can be applicable to items that have additional functions, e.g. storage features, day beds and convertible sofa-beds.
The durability test, 6.6.1, test 11, applies only to electrically operated beds.
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Annex A (normative) specifies test methods for finger entrapment.
Annex B (informative) gives a rationale.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12521:2023(Main)
Furniture - Safety, strength and durability - Requirements for domestic tables
SIST EN 12521:2024

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic tables intended for use by adults, including those with glass in their construction. It also contains additional test methods in Annex A and Annex B.
It does not apply to office tables and office desks, tables for non-domestic use, tables for educational institutions or outdoor tables for which European Standards exist.
It does not apply to trestle tables.
With the exception of stability tests, this document does not provide assessment of the suitability of any storage features included in domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation.
Annex A (normative) contains test methods for finger entrapment.
Annex B (informative) contains a table top deflection test.
Annex C (informative) contains a rationale.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day