EN ISO 5263:1997

Pulps - Laboratory wet disintegration (ISO 5263:1995)

Halbstoffe - Naßaufschlagen im Laboratorium (ISO 5263:1995)

Diese Internationale Norm legt ein Gerät und ein Verfahren zum Naßaufschlagen von Halbstoffen fest. Es beschreibt das Aufschlaggerät und in einigen Fällen das Aufschlag-Verfahren, das für eine Anzahl von Internationalen für Halbstoffarten angegeben wird. Grundsätzlich ist dieses Verfahren auf die meisten Zellstoffarten - einschließlich Sekundärfasern - anwendbar. Es ist ungeeignet für einige Langfaserstoffe, wie solche aus Baumwolle oder ähnlichen Materialien. Es wird als solches nicht zum Entfernen der Latenz von Holzstoffen empfohlen.

Pâtes - Désintégration humide en laboratoire (ISO 5263:1995)

Vlaknine - Laboratorijsko razvlaknjevanje v mokrem (ISO 5263:1995)

General Information

• Status: Withdrawn
• Publication Date: 18-Feb-1997
• Withdrawal Date: 31-Aug-2004
• ICS: 85.040 - Pulps
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172 - Pulp, paper and board
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Ref Project: SIST EN ISO 5263:2000 - Pulps - Laboratory wet disintegration (ISO 5263:1995)

Relations

• Replaced By: EN ISO 5263-1:2004 - Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 5263-2:2004 - Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 5263-3:2004 - Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5263:2000
01-april-2000
Vlaknine - Laboratorijsko razvlaknjevanje v mokrem (ISO 5263:1995)
Pulps - Laboratory wet disintegration (ISO 5263:1995)
Halbstoffe - Naßaufschlagen im Laboratorium (ISO 5263:1995)
Pâtes - Désintégration humide en laboratoire (ISO 5263:1995)
Ta slovenski standard je istoveten z: EN ISO 5263:1997
ICS:
85.040 Vlaknine Pulps
SIST EN ISO 5263:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5263:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 5263:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 5263:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 5263:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 5263:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 5263:2000
INTERNATIONAL
ISO
STANDARD
5263
Second edition
1995-06-01
Pulps - Laboratory wet disintegration
- D&in tegra tion humide en labora toire
Pa tes
Weference number
ISO 5263:%995(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 5263:2000
ISO 5263: 1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for which
a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 5263 was prepared by Technical Committee
lSO/TC 6, Paper, board and pulps, Subcommittee SC 5, Test methods and
quality specifica tions for Pulps.
This second edition cancels and replaces the first edition (ISO 5263:1979),
of which it constitutes a technical revision.
Annexes A and B form an integral part of this International Standard.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, sncluding photocopying and
microfilm, without Permission in writing from the publisher.
Standardization
International Organization for
Geneve 20 l Switzerland
Case postale 56 . CH-1211
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 5263:2000
INTERNATIONAL STANDARD o ISO ISO 5263:1995(E)
Pulps - Laboratory wet disintegration
3.1 disintegration of a pulp Sample: Mechanical
1 Scope
treatment in water so that interlaced fibres, which
were free in the pulp stock, are again separated from
This International Standard specifies an apparatus and
one another without appreciably changing their struc-
a method for the laboratory wet disintegration of pulp.
tural properties.
lt specifies the disintegration apparatus and in some
cases the disintegration procedures required in a number
of other International Standards dealing with pulps.
4 Apparatus
In principle, this method is applicable to most kinds of
pulp, including recycled fibres. lt is not suitable for Ordinary laboratory apparatus and
some very long-fibred pulps such as those from
cotton and similar materials; it is not recommended
4.1 Disintegrator, as described in annex A.
for the removal of latency from mechanical pulps (see
footnote 3, of table 1).
4.2 Balance, capable of weighing the Sample with an
accuracy of & 0,2 g.
2 Normative references
5 Preparation of Sample
The following Standards contain provisions which,
through reference in this text, constitute provisions of If the pulp is wet or air-dry, weigh out a Sample for dry
this International Standard. At the time of publication, matter determination in accordance with ISO 638. If
the editions indicated were valid. All Standards are the pulp is in slush form, determine the dry matter
subject to revision, and Parties to agreements based content in accordance with ISO 4119.
on this International Standard are encouraged to
Take the amount of pulp specified in table 1. DO not
investigate the possibility of applying the most recent
tut the pulp and avoid taking tut edges. Pulps having
editions of the Standards indicated below. Members
a dry matter content equal to or greater than
of IEC and ISO maintain registers of currently valid
20 % (m/m) shall be soaked in 1 litre to 1,5 litres of
International Standards.
water at 20 “C + 5 “C (see notes 1 and 2) for the time
specified in table 1. If the pulp is in the form of sheets
- Determination of dry matter
ISO 638: 1978, Pulps
or slabs, tear the soaked pulp into pieces of
content.
dimensions approximately 25 mm x 25 mm.
ISO 4119: 1995, Pulps - Determination of stock
NOTES
concen tra tion.
1 The type of water to be used should be of Same quality
as that required in the test for which the pulp is disinte-
grated.
3 Definition
2 Where necessary for climatic reasons, a temperature of
For the purposes of this International Standard, the
25 “C k 5 “C may be applied, provided that this is noted in
following definition applies. the test report.

---------------------- Page: 9 ----------------------

SIST EN ISO 5263:
...