EN ISO 15548-2:2008

Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2008)

ISO 15548-2:2008 identifies the functional characteristics of a probe and its interconnecting elements and provides methods for their measurement and verification.
The evaluation of these characteristics permits a well-defined description and comparability of eddy current equipment.
By careful choice of the characteristics, a consistent and effective eddy current examination system can be designed for a specific application.
Where accessories are used, these should be characterised using the principles of ISO 15548-2:2008.
ISO 15548-2:2008 does not give the extent of verification nor acceptance criteria for the characteristics. These are given in the application documents.

Zerstörungsfreie Prüfung - Technische Ausrüstung für die Wirbelstromprüfung - Teil 2: Kenngrößen von Sensoren und deren Verifizierung (ISO 15548-2:2008)

Dieser Teil von ISO 15548 legt die Funktionskenngrößen eines Sensors und der zugehörigen Verbindungs-elemente fest und enthält Verfahren für ihre Messung und Verifizierung.
Die Beurteilung dieser Kenngrößen ermöglicht eine genaue Beschreibung und Vergleichbarkeit einer Wirbelstromausrüstung.
Durch sorgfältige Auswahl der Kenngrößen kann ein reproduzierbares und effektives Wirbelstrom Prüfsystem für spezifische Anwendungen entworfen werden.
Bei der Verwendung von Zubehörteilen sollten diese nach den Grundlagen dieses Teils von ISO 15548 charakterisiert werden.
Dieser Teil von ISO 15548 enthält weder Vorschriften für den Umfang der Verifizierung noch für die Annahmekriterien der Kenngrößen. Diese sind in den Anwendungsdokumenten enthalten.

Essais non destructifs - Appareillage pour examen par courants de Foucault - Partie 2: Caractéristiques des capteurs et vérifications (ISO 15548-2:2008)

L'ISO 15548-2:2008 identifie les caractéristiques fonctionnelles d'un capteur à courants de Foucault et de ses éléments d'interconnexion et fournit des méthodes pour les mesurer et les vérifier.
L'évaluation de ces caractéristiques permet de donner une description bien définie de l'appareillage à courants de Foucault et d'assurer la comparabilité entre appareillages.
Un système d'examen par courants de Foucault, cohérent et efficace, peut être conçu en procédant à un choix scrupuleux des caractéristiques pour une application spécifique.
Lorsque des accessoires sont mis en œuvre, il convient de les caractériser en appliquant les principes de l'ISO 15548-2:2008.
L'ISO 15548-2:2008 ne fournit pas l'étendue des vérifications ni des critères d'acceptation pour les caractéristiques. Ceux-ci sont définis dans les documents d'application.

Neporušitveno preskušanje - Oprema za preskušanje z vrtinčnimi tokovi - 2. del: Značilnosti sond in preverjanje (ISO 15548-2:2008)

General Information

• Status: Withdrawn
• Publication Date: 14-Sep-2008
• Withdrawal Date: 03-Dec-2013
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 3 - Eddy current testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Dec-2013
• Completion Date: 04-Dec-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 15548-2:2009 - Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2008)

Relations

• Replaces: EN 13860-2:2003 - Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 2: Probe characteristics and verification
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 15548-2:2013 - Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2013)
• Effective Date: 08-Oct-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung - Wirbelstromprüfung - Kenngrößen von Prüfeinrichtungen und deren Verifizierung - Teil 2: Kenngrößen von Sensoren und deren Verifizierung (ISO 15548-2:2008)Essais non destructifs - Équipement pour examens par courants de Foucault - Partie 2: Caractéristiques et vérification des sondes (ISO 15548-2:2008)Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2008)19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN ISO 15548-2:2008SIST EN ISO 15548-2:2009en,fr,de01-april-2009SIST EN ISO 15548-2:2009SLOVENSKI
STANDARDSIST EN 13860-2:20041DGRPHãþD



SIST EN ISO 15548-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 15548-2September 2008ICS 19.100Supersedes EN 13860-2:2003
English VersionNon-destructive testing - Equipment for eddy currentexamination - Part 2: Probe characteristics and verification (ISO15548-2:2008)Essais non destructifs - Appareillage pour examen parcourants de Foucault - Partie 2: Caractéristiques descapteurs et vérifications (ISO 15548-2:2008)Zerstörungsfreie Prüfung - Wirbelstromprüfung -Kenngrößen von Prüfeinrichtungen und deren Verifizierung- Teil 2: Kenngrößen von Sensoren und deren Verifizierung(ISO 15548-2:2008)This European Standard was approved by CEN on 6 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 15548-2:2008: ESIST EN ISO 15548-2:2009



EN ISO 15548-2:2008 (E) 2 Contents Page Foreword.3
SIST EN ISO 15548-2:2009



EN ISO 15548-2:2008 (E) 3 Foreword This document (EN ISO 15548-2:2008) has been prepared by Technical Committee CEN/TC 138 “Non-destructive testing”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 135 "Non-destructive testing". This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at the latest by March 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13860-2:2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN ISO 15548-2:2009



SIST EN ISO 15548-2:2009



Reference numberISO 15548-2:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO15548-2First edition2008-09-15Non-destructive testing — Equipment for eddy current examination — Part 2: Probe characteristics and verification Essais non destructifs — Appareillage pour examen par courants de Foucault — Partie 2: Caractéristiques des capteurs et vérifications
SIST EN ISO 15548-2:2009



ISO 15548-2:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy,
...