Safety of industrial trucks - Pedestrian propelled industrial platform trucks

This document applies to pedestrian propelled industrial platform trucks as defined in 3.1 with a rated capacity up to and including 500 kg, hereinafter referred to as “trucks” and designed for general purposes.
This document does not apply to:
—   shopping trolleys referred to in EN 1929, Parts 1 to 4 and 7 (CEN/TC 291);
—   roll containers referred to in EN 12674, Parts 1 to 4 (CEN/TC 261);
—   trucks that are intended to be towed by powered vehicles, e.g. milk-run-trains/trailer trains/tugger trains.
This document deals with the technical requirements to minimize the hazards listed in Annex C which can arise during commissioning, operation and maintenance of trucks when carried out in accordance with the specifications as intended by the manufacturer.
This document does not specify the additional requirements for:
—   operation in severe conditions (e.g. extreme environmental conditions such as: freezer applications, high temperatures, corrosive environment);
—   operation subject to special rules (e.g. potentially explosive atmospheres);
—   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/alkalis, radiating materials, especially brittle loads);
—   hazards occurring during construction, transportation, decommissioning and disposal;
—   direct contact with foodstuffs;
—   operation on gradients or on surfaces other than smooth, level, hard surfaces;
—   trucks designed for special applications (e.g., trucks used in hospitals as dinner trollies);
—   trucks fitted with hinged or sliding doors.
Other possible limitations of the scope of other standards referred to that also apply to this document.
Hazards relating to noise, vibration, visibility and static electricity are not dealt with in this document.
This document applies to trucks manufactured after the date of issue.

Sicherheit von Flurförderzeugen - Mitgängerbetriebene Plattformwagen

Dieses Dokument gilt für Mitgänger-Plattformwagen nach 3.1 mit einer Nenntragfähigkeit von bis zu 500 kg, nachfolgend als „Plattformwagen“ bezeichnet, welche für den allgemeinen Gebrauch konstruiert wurden.
Dieses Dokument gilt nicht für:
—   Einkaufswagen nach EN 1929, Teile 1 bis 4 und 7 (CEN/TC 291);
—   Rollbehälter nach EN 12674, Teile 1 bis 4 (CEN/TC 261);
—   Wagen, die zum Ziehen durch motorisierte Fahrzeuge vorgesehen sind, z. B. Milk-run-Züge/Lastzüge/Routenzüge.
Dieses Dokument behandelt die technischen Anforderungen, um die in Anhang C aufgeführten Gefährdungen zu minimieren, die während der in Übereinstimmung mit den Vorgaben des Herstellers durchgeführten Inbetriebnahme, des Betriebes und der Instandhaltung von Plattformwagen entstehen können.
Dieses Dokument legt keine zusätzlichen Anforderungen fest für:
—   den Betrieb unter erschwerten Bedingungen (z. B. Umgebungsbedingungen wie Kühlhausbetrieb, hohe Temperaturen, korrosive Umgebung):
—   den Betrieb unter bestimmten Regeln (z. B. mögliche explosionsfähige Atmosphären);
—   die Handhabung von Lasten, deren Eigenschaften zu gefährlichen Situationen führen können (z. B. feuerflüssige Massen, Säuren/Basen, radioaktive Materialien, besonders brüchige Lasten);
—   Gefährdungen, die während der Produktion, des Transports, der Außerbetriebnahme und der Verschrottung auftreten;
—   Plattformwagen, die in direktem Kontakt mit Lebensmitteln stehen;
—   die Verwendung auf Neigungen oder auf anderen als glatten, ebenen und festen Untergründen;
—   Plattformwagen für besondere Anwendungen (z. B. Plattformwagen für die Verwendung in Krankenhäusern als Speisewagen);
—   Plattformwagen mit Pendel- oder Schiebetüren.
Weitere mögliche Begrenzungen des Anwendungsbereiches anderer Normen, auf die in diesem Dokument Bezug genommen wird, müssen auch berücksichtigt werden.
Gefährdungen durch Lärm, Vibration, Sichtverhältnisse und statische Elektrizität sind nicht Bestandteil dieses Dokuments.
Dieses Dokument gilt für Plattformwagen, die nach der Veröffentlichung der Norm hergestellt werden.

Sécurité des chariots de manutention - Chariot de manutention à plateforme à propulsion manuelle

Le présent document s'applique aux chariots manuels de manutention à plateforme tels que définis en 3.1, ayant une capacité nominale jusqu'à 500 kg inclus, désignés ci-après « chariots » et conçus pour un usage général.
Le présent document ne s'applique pas aux :
—   chariots d’achat référencés dans l’EN 1929, parties 1 à 4 et 7 (CEN/TC 291) ;
—   conteneurs à roulettes référencés dans l’EN 12674, parties 1 à 4 (CEN/TC 261) ;
—   chariots qui sont prévus pour être tractés par des véhicules motorisés, par exemple, milkruns / trains routiers / trains logistiques.
Le présent document traite des prescriptions techniques pour minimiser les phénomènes dangereux, énumérés à l’Annexe C, qui peuvent apparaître pendant la mise en service, le fonctionnement et la maintenance des chariots lorsqu'ils sont utilisés conformément aux spécifications telles que prévues par le fabricant.
Le présent document ne spécifie pas de prescriptions complémentaires pour :
—   l'utilisation dans des conditions sévères (par exemple, des conditions environnementales extrêmes telles que : applications frigorifiques, hautes températures, environnement corrosif) ;
—   l'utilisation sujette à des règles spéciales (par exemple, atmosphères potentiellement explosibles) ;
—   la manutention de charges dont la nature pourrait conduire à des situations dangereuses (par exemple, métal en fusion, acide/base, matériaux émetteurs de radiations, charges particulièrement fragiles) ;
—   les phénomènes dangereux apparaissant pendant la fabrication, le transport, la mise hors service et la mise au rebut ;
—   les contacts directs avec les denrées alimentaires ;
—   l'utilisation dans des pentes ou sur des surfaces autres que des surfaces lisses, planes et dures ;
—   les chariots conçus pour des applications spéciales (par exemple, chariots utilisés dans les hôpitaux comme trolley de  dîner) ;
—   les chariots équipés de portes battantes ou coulissantes.
Les autres limitations possibles du domaine d'application des autres normes en référence qui s'appliquent également au présent document.
Les phénomènes dangereux relatifs au bruit, aux vibrations, à la visibilité et à l'électricité statique ne sont pas traités dans le présent document.
Le présent document s'applique aux chariots fabriqués après la date de la publication.

Varnost vozil za talni transport - Ročno gnana vozila z visokim dvigom

1.1   Ta evropski standard se uporablja za ročno gnana vozila z visokim dvigom za talni transport, kot je določeno v točki 3.1., z nazivno    nosilnostjo do vključno 500 kg (v nadaljevanju: »vozila«), ki so namenjena za splošno uporabo.
1.2   Ta standard se ne uporablja za:
–   nakupovalne vozičke, navedene v delih od 1 do 6 standarda EN 1929 (CEN/TC 291);
–   transportne vozičke z ograjo, navedene v delih od 1 do 4 standarda EN 12674 (CEN/TC 261);
–   vozila, namenjena vleki z gnanimi vozili (npr. vlečna skladiščna vozila – »milk-run«).
1.3   Ta standard obravnava tehnične zahteve za zmanjšanje nevarnosti iz točke 4, ki se lahko pojavijo med    zagonom, obratovanjem in vzdrževanjem vozil, kadar se ti postopki izvajajo v skladu s specifikacijami    proizvajalca.
1.4   Ta standard ne določa dodatnih zahtev za:
–   obratovanje v zahtevnih razmerah (npr. izjemni okoljski pogoji, kot so zmrzal, visoke temperature,    korozivno okolje);
–   obratovanje, pri katerem veljajo posebna pravila (npr. potencialno eksplozivne atmosfere);
–   ravnanje s tovori, ki lahko povzročijo nevarne razmere (npr. taljena kovina, kisline/baze, sevajoči    materiali, posebej krhki tovori);
–   nevarnosti, ki se pojavijo med gradnjo, prevozom, prenehanjem uporabe in odstranitvijo;
–   neposreden stik z živili;
–   obratovanje na pobočjih ali površinah, ki niso gladke, ravne in trdne;
–   vozila, zasnovana za posebne primere rabe (npr. v bolnišnicah, vozički za strežbo);
–   vozila z vrati na tečajih ali drsnimi vrati.
1.5   Druge možne omejitve glede področja uporabe drugih povezanih standardov veljajo tudi za ta standard.
1.6   Ta standard ne obravnava nevarnosti v zvezi z vidljivostjo in statično elektriko.

General Information

Status
Published
Publication Date
10-May-2022
Withdrawal Date
29-Nov-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-May-2022
Due Date
08-Jun-2022
Completion Date
11-May-2022

Relations

Buy Standard

Standard
EN 1757:2022
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2022
Nadomešča:
SIST EN 1757-3:2003
Varnost vozil za talni transport - Ročno gnana vozila z visokim dvigom
Safety of industrial trucks - Pedestrian controlled manual platform trucks
Sicherheit von Flurförderzeugen - Mitgänger-Plattformwagen
Sécurité des chariots de manutention - Chariots manuels à plateforme à conducteurs à
pied
Ta slovenski standard je istoveten z: EN 1757:2022
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 1757
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 53.060 Supersedes EN 1757-3:2002
English Version
Safety of industrial trucks - Pedestrian propelled industrial
platform trucks
Sécurité des chariots de manutention - Chariot de Sicherheit von Flurförderzeugen -
manutention à plateforme à propulsion manuelle Mitgängerbetriebene Plattformwagen
This European Standard was approved by CEN on 27 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1757:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 Requirements . 8
4.1 Design and construction forces for truck . 8
4.2 Propelling, steering . 8
4.2.1 General. 8
4.2.2 Tiller . 8
4.2.3 Push/pull handles. 9
4.3 Wheels and castors . 9
4.3.1 Specifications . 9
4.3.2 Wheel guards . 9
4.4 Parking brake . 10
4.5 Stability . 10
4.6 Protection against crushing and shearing points . 10
4.7 Edges and angles . 10
5 Verifications of safety requirements and/or measures . 11
5.1 General. 11
5.2 Design verification on truck type . 11
5.2.1 General. 11
5.2.2 Structural test . 11
5.2.3 Verification of design and construction forces . 11
5.2.4 Verification of the parking brake . 11
5.2.5 Verification of the stability . 11
5.3 Functional routine verification . 12
5.3.1 General. 12
5.3.2 Inspection . 12
5.3.3 Dynamic tests . 12
6 Information for use . 12
6.1 General. 12
6.2 Instruction label or handbook . 12
6.2.1 General. 12
6.2.2 General obligation . 12
6.2.3 Intended uses . 12
6.2.4 Residual risks . 13
6.2.5 Prohibited uses . 13
6.2.6 Instructions for service and maintenance of the truck . 13
6.2.7 Instructions for transportation . 13
6.3 Minimum marking . 14
6.3.1 Information plates . 14
6.3.2 Warnings . 14
6.3.3 Languages . 14
Annex A (normative) Method for measurement of forces (F) . 15
A.1 Conditions for test . 15
A.2 Measurement of starting force and rolling force . 15
A.3 Measurement of the steering force . 15
A.3.1 Steering by means of a tiller: . 15
A.3.2 Steering by means of horizontal or vertical bars: . 16
Annex B (normative) Stability tests for pedestrian propelled industrial platform trucks . 17
B.1 Conditions of validity . 17
B.2 Acceptance conditions . 17
B.3 Description of tests . 17
B.3.1 Dynamic longitudinal test . 17
B.3.2 Static tests . 18
Annex C (informative) List of significant hazards . 21
Bibliography . 23
European foreword
This document (EN 1757:2022) has been prepared by Technical Committee CEN/TC 150 “Industrial
trucks - Safety”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1757-3:2002.
In comparison with the previous edition, the following technical modifications have been made:
— application changed to pedestrian propelled industrial platform trucks as defined in 3.1 with a
rated capacity up to and including 500 kg (in the previous edition 1 000 kg);
— example given for trucks that are intended to be towed by powered vehicles;
— reference made to EN ISO 3691-1:2015 and ISO 5053-1;
— definition 3.1 and 3.2 revised;
— definition 3.5 (operator) deleted;
— minimum span of tiller changed into 200 mm for each hand (alignment with EN ISO 3691-5);
— Bibliography updated.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
As impacted by EN ISO 3691-1:2015/A1:2020.
Introduction
This document is a Type-C standard as stated in EN ISO 12100.
This document is of relevance, in particular, for the following stakeholder groups representing the
market players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);
— health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.).
Others can be affected by the level of machinery safety achieved with the means of the document by the
above-mentioned stakeholder groups:
— machine
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.