EN 13480-4:2012/A4:2017

Metallic industrial piping - Part 4: Fabrication and installation

This Part of this European standard EN 13480 describes the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3.

Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung

Dieser Teil der Europäischen Norm EN 13480 beschreibt die Anforderungen an die Fertigung und Verlegung einschließlich der Halterungen von Rohrleitungssystemen, die nach EN 13480-3 konstruiert sind.

Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation

La présente partie de EN 13480 spécifie les exigences relatives à la fabrication et à l'installation des réseaux de tuyauteries, supports inclus, conçus conformément à prEN 13480-3.

Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A4

General Information

• Status: Withdrawn
• Publication Date: 25-Apr-2017
• Withdrawal Date: 27-Jun-2017
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 4 - Manufacturing and installation
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jun-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-4:2012/A4:2017 - Metallic industrial piping - Part 4: Fabrication and installation

Relations

• Replaced By: EN 13480-4:2017 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 15-Feb-2017
• Amends: EN 13480-4:2012 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-4:2012/oprA4:2015
01-december-2015
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2012/prA4
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-4:2012/oprA4:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 13480-4:2012/oprA4:2015

SIST EN 13480-4:2012/oprA4:2015

DRAFT
EUROPEAN STANDARD
EN 13480-4:2012
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA4
November 2015
ICS 23.040.01
English Version
Metallic industrial piping - Part 4: Fabrication and
installation
Tuyauteries industrielles métalliques - Partie 4: Metallische industrielle Rohrleitungen - Teil 4:
Fabrication et installation Fertigung und Verlegung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A4, if approved, will modify the European Standard EN 13480-4:2012. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISC
...

SLOVENSKI STANDARD
01-julij-2017
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A4
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2012/A4:2017
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13480-4:2012/A4
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2017
EUROPÄISCHE NORM
ICS 23.040.01
English Version
Metallic industrial piping - Part 4: Fabrication and
installation
Tuyauteries industrielles métalliques - Partie 4: Metallische industrielle Rohrleitungen - Teil 4:
Fabrication et installation Fertigung und Verlegung
This amendment A4 modifies the European Standard EN 13480-4:2012; it was approved by CEN on 27 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-4:2012/A4:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modification to 9.14.1 . 4
2 Modification to 10.3 . 4
3 Modification to 12.5 . 4

---------------------- Pa
...