EN 14894:2006

LPG equipment and accessories - Cylinder and drum marking

This European Standard specifies stamp marking requirements for transportable refillable LPG cylinders and metallic drums including:
¾   Steel LPG cylinders designed and manufactured in accordance with EN 1442, EN 14140, EN 12807 or an equivalent standard or technical code recognised by the Competent Authority.
   LPG metallic drums designed and manufactured in accordance with EN 14893 or an equivalent standard or technical code recognised by the Competent Authority.
   Welded aluminium LPG cylinders designed and manufactured in accordance with EN 13110 or an equivalent standard or technical code recognised by the Competent Authority.
   LPG composite cylinders designed and manufactured in accordance with EN 14427 or an equivalent standard or technical code recognised by the Competent Authority.
NOTE   All these types of receptacles are referred to throughout this standard as “cylinders”.
This standard does not specify any requirements for product, hazard or safety-phrase labelling of packaging which may be required to meet ADR or other legislative requirements.

Flüssiggas-Geräte und Ausrüstungsteile - Kennzeichnung von Flüssiggas(LPG)-Flaschen

Diese Europäische Norm legt die Anforderungen an die Stempelung von ortsbeweglichen, wiederbefüllbaren LPG-Flaschen und metallischen Druckfässern fest, einschließlich:
-   LPG-Flaschen aus Stahl, gestaltet und hergestellt in Übereinstimmung mit EN 1442, EN 14140, EN 12807 oder einer gleichwertigen Norm oder technischen Regel, die von der zugelassenen Stelle anerkannt wurde;
-   metallische LPG-Fässer aus Stahl, gestaltet und hergestellt in Übereinstimmung mit EN 14893 oder einer gleichwertigen Norm oder technischen Regel, die von der zugelassenen Stelle anerkannt wurde;
-   geschweißte LPG-Flaschen aus Aluminium, gestaltet und hergestellt in Übereinstimmung mit EN 13110 oder einer gleichwertigen Norm oder technischen Regel, die von der zugelassenen Stelle anerkannt wurde;
-   LPG-Flaschen aus Verbundwerkstoffen, gestaltet und hergestellt in Übereinstimmung mit EN 14427 oder einer gleichwertigen Norm oder technischen Regel, die von der zugelassenen Stelle anerkannt wurde.
ANMERKUNG   Alle diese Behältnisse werden in der gesamten vorliegenden Norm als "Flaschen" bezeichnet.
Diese Norm legt keine Anforderungen für Produkt, Gefährdungen oder Anbringen von Warnhinweisschildern auf Verpackungen fest, die ADR-Anforderungen oder anderen gesetzlichen Bestimmungen entsprechen müssen.

Équipements pour gaz de pétrole liquéfié et leurs accessoires - Marquage des bouteilles et des fûts à pression

La présente Norme européenne prescrit les exigences de marquage s’appliquant aux bouteilles à GPL
transportables rechargeables et aux fûts à pression métalliques, incluant :
- les bouteilles à GPL en acier conçues et fabriquées conformément aux normes EN 1442, EN 14140,
EN 12807 ou à une norme équivalente ou un code technique reconnu par l’autorité compétente ;
- les fûts à pression métalliques pour GPL conçus et fabriqués conformément à l’EN 14893 ou à une
norme équivalente ou un code technique reconnu par l’autorité compétente ;
- les bouteilles à GPL en aluminium soudées, conçues et fabriquées conformément à l’EN 13110 ou à une
norme équivalente ou un code technique reconnu par l’autorité compétente ;
- les bouteilles à GPL en matériaux composites conçues et fabriquées conformément à l’EN 14427 ou à
une norme équivalente ou un code technique reconnu par l’autorité compétente.
NOTE Dans la présente norme, tous ces types de récipients sont désignés "bouteilles".
La présente norme ne prescrit pas d’exigences, relatives au produit, aux phénomènes dangereux ou à
l’étiquetage de sécurité de l’emballage, pouvant être requises pour être conforme à l’ADR ou à toute autre
exigence législative.

Oprema in dodatki za UNP – Označevanje jeklenk in sodov

General Information

• Status: Withdrawn
• Publication Date: 16-May-2006
• Withdrawal Date: 03-May-2011
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 1 - Design and manufacture of LPG pressure vessels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-May-2011
• Completion Date: 04-May-2011
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14894:2006 - LPG equipment and accessories - Cylinder and drum marking

Relations

• Replaced By: EN 14894:2011 - LPG equipment and accessories - Cylinder and drum marking
• Effective Date: 07-May-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LPG equipment and accessories - Cylinder and drum markingÉquipements pour gaz de pétrole liquéfié et leurs accessoires - Marquage des bouteilles et des futs a pressionFlüssiggas-Geräte und Ausrüstungsteile - Kennzeichnung von Flüssiggas(LPG)-FlaschenTa slovenski standard je istoveten z:EN 14894:2006SIST EN 14894:2006en23.020.30MHNOHQNHPressure vessels, gas cylindersICS:SLOVENSKI
STANDARDSIST EN 14894:200601-oktober-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14894May 2006ICS 23.020.30 English VersionLPG equipment and accessories - Cylinder and drum markingÉquipements pour gaz de pétrole liquéfié et leursaccessoires - Marquage des bouteilles et des fûts àpressionFlüssiggas-Geräte und Ausrüstungsteile - Kennzeichnungvon Flüssiggas(LPG)-FlaschenThis European Standard was approved by CEN on 20 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14894:2006: E

Examples of alternative locations, stamp markings.11 Bibliography.12

Therefore the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID and/or in the technical annexes of the ADR. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

The layout of the marks is covered by 4.3.
Additional markings may be applied if required by other regulations or the technical standard, or when required by the cylinder owner; provided the layout does not cause any confusion in their interpretation and the clarity of the other mandatory markings is not affected. 4.2 Workmanship 4.2.1 All stamp markings shall be affixed clearly, legibly and durably on the cylinder and shall remain legible under all foreseeable operating and ageing conditions.

Clause 5, Clause 6, Clause 7 and Clause 8 indicate which markings shall be "permanent (P)" and which may be "durable (D)". NOTE
Markings which are permitted to be durable may be permanently applied if so desired. 4.2.2 For metallic cylinders, the marks shall be located on the shoulder, top end or neck of the cylinder or on a permanently affixed component, e.g. welded nameplate, handle(s), foot ring, shroud etc.
4.2.3 If markings are applied after completion of manufacture or following periodic inspection, by stamping or engraving onto the pressure parts of the cylinder, it shall be demonstrated by fatigue and burst tests in accordance with the original design standard or equivalent, that failure does not initiate in the marking
...