EN ISO 11542-2:1998

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)

Kunststoffe - Ultrahochmolekulares Polyethylen (PE-UHMW)- Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 11542-2:1998)

Dieser Teil von ISO 11542 legt die Bedingungen zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von PE-UHMW-Formmassen anzuwendenden Prüfverfahren fest. Anforderungen an die Behandlung des Probenmaterials und für das Konditionieren des Probematerials vor der Herstellung der Probekörper und der Probekörper vor der Prüfung sind ebenfalls enthalten.

Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 11542-2:1998)

Polimerni materiali - Materiali za oblikovanje in ekstrudiranje na osnovi polietilena z ultra visoko molsko maso polietilena (PE UHMW) - 2. del: Priprava preskušancev in določanje lastnosti (ISO 11542-2:1998)

General Information

• Status: Withdrawn
• Publication Date: 14-Nov-1998
• Withdrawal Date: 19-Jan-2021
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 7 - Polyolefin materials
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jan-2021
• Ref Project: SIST EN ISO 11542-2:2000 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)

Relations

• Replaced By: EN ISO 21304-2:2021 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
• Effective Date: 23-Jan-2019
• Corrected By: EN ISO 11542-2:1998/AC:2008 - Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11542-2:2000
01-maj-2000
3ROLPHUQLPDWHULDOL0DWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMHQDRVQRYLSROLHWLOHQD
]XOWUDYLVRNRPROVNRPDVRSROLHWLOHQD3(8+0:GHO3ULSUDYDSUHVNXãDQFHY
LQGRORþDQMHODVWQRVWL,62
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion
materials - Part 2: Preparation of test specimens and determination of properties (ISO
11542-2:1998)
Kunststoffe - Ultrahochmolekulares Polyethylen (PE-UHMW)- Formmassen - Teil 2:
Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 11542-2:1998)
Plastiques - Matériaux a base de polyéthylene a tres haute masse moléculaire (PE-
UHMW) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et
détermination des propriétés (ISO 11542-2:1998)
Ta slovenski standard je istoveten z: EN ISO 11542-2:1998
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 11542-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11542-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 11542-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 11542-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 11542-2:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 11542-2:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 11542-2:2000
INTERNATIONAL ISO
STANDARD 11542-2
First edition
1998-11-15
Plastics — Ultra-high-molecular-weight
polyethylene (PE-UHMW) moulding
and extrusion materials —
Part 2:
Preparation of test specimens
and determination of properties
Plastics — Matériaux à base de polyéthylène à très haute masse
moléculaire (PE-UHMW) pour moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
A
Reference number
ISO 11542-2:1998(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 11542-2:2000
ISO 11542-2:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11542-2 was prepared by Technical Committee
ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
ISO 11542 consists of the following parts, under the general title Plastics —
Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and
extrusion materials:
— Part 1: Designation system and basis for specifications
— Part 2: Preparation of test specimens and determination of properties
Annexes A and B form an integral part of this part of ISO 11542.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 11542-2:2000
©
INTERNATIONAL STANDARD  ISO ISO 11542-2:1998(E)
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW)
moulding and extrusion materials —
Part 2:
Preparation of test specimens and determination of properties
1  Scope
This part of ISO 11542 specifies the methods of preparation of test specimens and the test methods to be used in
determining the properties of PE-UHMW moulding and extrusion materials. Requirements for handling test material
and for conditioning both the test material before moulding and the specimens before testing are given here.
Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the
materials from which these specimens are made are given. Properties and test methods which are suitable and
necessary to characterize PE-UHMW moulding and extrusion materials are listed.
The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use
for or of particular significance to these mould
...